I'm using these. Got 3M brand but too expensive as I used a lot for my reviews.

[attachmentid=10228084]

I see, then have to cut into the shapes that you want?
mine is a 35mm round shape. so probably will have to DIY into such size?
This type is very strong isn't it? won't it destroy the tint when you remove it later?

Yes DIY cut to the shape you want.

These are easy to remove without sticky residue or tint byebye. Even easier if it heated like parked in the sun for a few hours.

Tried goo gone yet?

I had try using Sticker Removal chemical that I bought from hardware shop last time, addition with glass cleaner, nail removal, and Dettol hand sanitizer. Look like damn Kiasu right?
I didn't get the Goo gone as I feel probably it will be similar to the sticker removal I use.

The result still visible, really don't have idea or maybe don't have a passion to work on it. When you rub with the chemical, the sticky will feel like melting, but it very fast will dry up. When it dry, the sticky will become hard and stay at the position again. Just worry the most I do, the position grow bigger.     

Will try to go to car detailing shop to see whether they can make it disappear.     

whoa this is too much of effort liao. cannot leave it there?

Haha...damn TL liao. don't want to do liao. Leave it there lor. Or just go change front windscreen Tint saja senang. Waste my 1 week time to settle this shit.   

maybe you got OCD, thats why cannot stand  that thing being there.

I'm using these. Got 3M brand but too expensive as I used a lot for my reviews.

[attachmentid=10228084]

what is OCD?

https://detail.tmall.com/item.htm?spm=a230r...s=1&abbucket=11

i found this thing on taobao. not sure good or not, it is produced for such purpose too.

got 2 types, arcylic and those foam (black colour) type. not sure which one to go with though. any comment?

I had try using Sticker Removal chemical that I bought from hardware shop last time, addition with glass cleaner, nail removal, and Dettol hand sanitizer. Look like damn Kiasu right?
I didn't get the Goo gone as I feel probably it will be similar to the sticker removal I use.

The result still visible, really don't have idea or maybe don't have a passion to work on it. When you rub with the chemical, the sticky will feel like melting, but it very fast will dry up. When it dry, the sticky will become hard and stay at the position again. Just worry the most I do, the position grow bigger.     

Will try to go to car detailing shop to see whether they can make it disappear.     

I had try using Sticker Removal chemical that I bought from hardware shop last time, addition with glass cleaner, nail removal, and Dettol hand sanitizer. Look like damn Kiasu right?
I didn't get the Goo gone as I feel probably it will be similar to the sticker removal I use.

The result still visible, really don't have idea or maybe don't have a passion to work on it. When you rub with the chemical, the sticky will feel like melting, but it very fast will dry up. When it dry, the sticky will become hard and stay at the position again. Just worry the most I do, the position grow bigger.     

Will try to go to car detailing shop to see whether they can make it disappear.     

That's the clear acrylic double sided tape by 3M

Obsessive-Compulsive Disorder (OCD)
you cannot stand things that are not in your controllable sight, etc.

What tint film you have on your car that you are afraid to use thinner to clean the glue?
Maybe you ask the tinting shop whether you can use thinner on their tint film.
Pity you, spent so much still cannot get the glue out.

Want to try Meg's PlastX? If you're in Cheras area, I can give you some to try    

i previously use xiaomi dashcam, around 200 bucks or something, installed myself on my previous car.

it was mounted directly onto the windscreen with the original 3m double side tape came together with the dashcam. After a couple of years, sold the car, trying hard to remove the mount, couldn't and it stick to the windscreen (with tint) too hard, so end up remove it forcefully and ended up leaving a hole on the tint.

After getting a new car, got myself a 3m double side tape from taobao, was trying to install it onto the new car that has windscreen too. fear of the same damage, i then use the roadtax sticker that is self adhesive to the windscreen as the middle layer in between the tint and the double side tape, but mana tau, it didn't work as great as applying it directly.

What solutions you guys can suggest me? i don't wanna leave a hole on the tint on the new car.

Another way is to get the suction cup mount. However there may be incompatibility in terms of the sizing of the dashcam's peg vs suction mount...but its noting that a hot glue gun cant solve. If your feeling DIY.

Plus side is u now have option to remove it at will with suction cup.

I've done the above for my B1W using my old ass suction mount from G1W days.

Will the suction damage the tint film (suck the tint film out of the windscreen)?