brother just go for noctua.it damn nice and silent!!!!!!!!!!!!!!!

ATi7050? I thought that's nVidia laa

So 2.25 is a bit high, but BIOS health status stated 2.20
2.15 -> 2.11
2.25 -> 2.20
Don't dare to touch it laa while PC running

I'm getting Cyclo Will try to push higher, but still I don't think so laa because of ayam brand PSU

This post has been edited by afosz: Jun 26 2007, 11:09 PM

WOW! good results.....have u ever try what is the max o/c status using onboard ATI1250 graphic? I believed yr external graphics card help a lot

How many RPM (original 120 silent fan?) of your CPU cooler?
What is the CPU Vcore/ DDR Voltage and running Temp?

Mine to share what is your BIOS version and other O/C setting? HTT V and NB/SB V etc?

This is your "hand picked" system from many mobo/Proc/DDR right?

This post has been edited by ongbs: Jun 27 2007, 12:15 AM

It'll b safer to get ur PSU 1st, then only OC.

But at 2.3V, no prob to touch the rams. I've touch mine at 2.3V, not that hot,but when u load up, it does get heated up fast. Mayb u can consider adding some Heatsinks to it or a heatspreader. I'm sure Moderno's Vizo thread can offer u some choices.

The TT BT VX already in, u should grab it soon b4 LYP sapu all the stocks. Only got about 100 pcs come in, so, if 10 units for 10 shops in LYP, i think it'll be shortage again. hehe

O ok, PSU 1st then OC

Just wanna learn and feel the exp of OCing when you have all its features. Unlike my older mobo, S2G has limited features, so I learn a lot lesser compared to now. Now I know pretty much about those stuff, it's time to get other items plak

For memory cooler, which is better? Heatspreader or the whole slot cooler itself like Cyclo, Vizo's or Evercool's?

get one of allngaps's ram coolers, quite nicely done and cheap =)

darn, i've got a problem...

as my sig, my proc was oced to 2.5ghz...
i'm DC to 2.3ghz which was stable few weeks d...
bt this few days, my pc hang when i was sleeping...
so i make the proc run on default 2.0Ghz...
this time it didn't hang...

wad is the problem?

what brand is ur psu?

disable the CnQ...

Tsunami OP-400W

CnQ nvr been on...
My oc was stable for a month plus...

save u'r budget and get a reliable PSU like enermax..Time to change

This post has been edited by sjn hassan: Jun 27 2007, 08:41 PM

u didnt stress for a long period?? ur cpu is dualcore so u have to stress em in double ways. open orthos for 2 times then u may select one of em for 0 cpu and the other orthos u select for 1 cpu. thats will make ur cpu 100% usage. for a good stability, kept em stressing about 1 or 2 days. juz my 2 cent..

enermax fma2 will do or u can get urself fsp group psu. oso reliable and stable. ey is this includes in psu for o/cers discussion? offtopic

enermax is not reliable nowdays... it used to be but now no... enermax is a no no... after they got popular among the OCer, the quality of their product gotten bad... a fren of mine juz blown his PC after buying enermax... better go get silverstone or corsair... better and more stable...
i help my fren buy Strider 560w for onli RM330... LYP price for Strider 400w onli for rm199... if u got a lot of budget, then go get the OP650 single rail...

all my oc also orthos passed 10+hrs...

i think the time to change PSU lar...

FMA not so reliable this days meh?

planning to get FMAII 460W... any opinion?

Yup, its better to get a ram cooler than use heat spreaders. And allngap's are some of the best, even better than those branded ones.

A test by corsair showing the ineffectiveness of heat speaders. Gimme a break man..WTF only 3 MHz improvement in overclock??!!
http://www.corsairmemory.com/_appnotes/AN6...Lab_Results.pdf

Think you better change your PSU bro.. Just get a decent 450W one. Your system probably take less than 200W, but the negligible price difference for lower wattage PSU means there's no point getting a lower watt model.

come come, together go get psu then can get discount.... at the first week of next month

The reoson I put on Heat Spreader is not to gain higher OC speed.
It is for fun aka hobby! The module will look more solid and running in much lower temperature.

The advantages by installing the heat spreader is the much lower DDR running temperature hense will prolong the DDR lifespan.

I installed Copper Heat Spreader on my Team DDR2 modules, my DDR2 module temperature kept below 35C even running at 2.3V at 300Mhz@DDR~960MHz!
I am not using RAM coller fan but the fan on top of my GeminII will blows directly to DDR modules as well.

This post has been edited by ongbs: Jun 28 2007, 01:16 AM

go get acbel, silverstone or ocz

juz grab myself a brisbane today

AMD3600+ | Abit K9NS | Mushkin PC2-4300 | Task 480W