sorry i might have forgotten, but can u list down ur rig here?
and what are the timing used in those operation?

Try vcore 1.45v as u maybe got a not very good brisby like me.
My brisby needs 1.45v to achieve 3Ghz. 

If still cant, try to use multi 9.
-pWs-

3600+ X2 brisbane G1  | sjn hassan | BIOSTAR TForce 550 | Micron DDR2-800 |

what's else do u need?

which timing do u request?what i'm using now or the one i try to oc at 3ghz?
OO..never tried before..have to try later 

no, thats enough i guess..
i want to know the timing that u r using to try get to 3.0GHz..

and just an additional information, last time i managed to use DDR1080 CL5 for my previous windsor..
but for this brisbane, when i was using the DDR800 multiplier, the ram cannot go further than DDR1066, even with the same voltage and timing with the previous windsor..i dunno whats wrong with that 

no, thats enough i guess..
i want to know the timing that u r using to try get to 3.0GHz..

and just an additional information, last time i managed to use DDR1080 CL5 for my previous windsor..
but for this brisbane, when i was using the DDR800 multiplier, the ram cannot go further than DDR1066, even with the same voltage and timing with the previous windsor..i dunno whats wrong with that 

my highest ram clock that i've tried with WIndsor is 1GHz with AUTO timing and 1080MHz for Brisbane

the timing i set is AUTO

---

Added on June 23, 2007, 11:53 pmcan boot and have passed 1M superPI.will try 32m later..time to sleep.thanks for the advice

and if the price is really going down, we can take this opportunity to grab it for our gf's rig or our second/third/forth rig..

kalakatu do u prime2004/ orthos tortute test?
i just got brisbane here in penang after long waiting ...
got 50 brisbane in office =)
grab 25 and test... almost all cpu can get to 240 x 9.5 with original vcore and it won't boot anymore for more htt...
by increasing vcore... almost all can boot well at 3ghz... 316x 9.5 maybe...
the problem is the vcore needed to gain stable ... at 3ghz..
tried tried tried... found out they need at least 1.5 vcore to gain stable ... and she's hot at that core...
conclusion... 1st batch brisbane should be happy with their cpu because second batch cpu sure drop price and quality...
never have chance to get 1st batch cpu ... lucky kl ppl =)
anyway i'm still torture it....
i dun like to clock and prime fail because cpu is not 100% reliable to do calculation

What u have done??
-pWs-

Mind to share contry of origin of your brisby? Just curious will it affect the overclockability?

My brisby 3600+ pair with TA690G and Team VR 667 1GBx2.
Passed DOS memtest 1.6 at 316x9.5~3GHz, DDR2~1.1GHz, but refuse to boot in WinXP.

So far able to prime stable in orthes(5hrs+) and Super PI 32M in hot day, at 300x9.9~2.85GHz, DDR~815MHz@4-4-4-12 timing.

Does BIOS version affect OC?? I'm running 601 on my TA690G ..

i pumped the vcore to 1.45v.will run stress test later and play with the ram.thanks anyway
where did u get the Multiplier 9.9??max Brisby 3600+ is 9.5 not 10 
yeah..sometimes older bios can oc better than newer

It's a typo laa I guess

After OCing and if I decided to change the cooler, do I need to downclock 1st before changing it?

dun nid to downclock it wan..but u might expect higher temps temporary if ur using as5 or mx-1 paste, cz need abit of time for it to bake up..

and yeah, dont throw the hsf away, coz u need it for rma purposes lol...

I see. That means I should be expecting quite high temp at 1st, but later it will cool down? And the HSF, of course I won't throw one

Mind to share contry of origin of your brisby? Just curious will it affect the overclockability?

My brisby 3600+ pair with TA690G and Team VR 667 1GBx2.
Passed DOS memtest 1.6 at 316x9.5~3GHz, DDR2~1.1GHz, but refuse to boot in WinXP.

So far able to prime stable in orthes(5hrs+) and Super PI 32M in hot day, at 300x9.9~2.85GHz, DDR~815MHz@4-4-4-12 timing.

Temp damp good using Gemin II pair with 2x120mm fans. Getting around 45C in hot day@Vcore 1.475V.

Trying hard to get 3GHz barrier