try hard baby , 10th should be go higher !

haha.. too many asinment now.. sibuk glerrrrrrrrr

wah!!when u said that,than i juz realize that i put the ram wrongly

will adjuzt later...thanx man!!

wakao , how come u make the funny mistake ....

very swt
pity crucial 10th

haha.. i know it's pity.. no time la.. after tis if i'm have time.. i show u k..

crucial 10th annerver challenge !

i feel like wanna pengsan when i read this.
Such low clock and loose ram timing also need 2.5vdimm
My 10th can hit 1200 5-5-4-3 with 2.3vdimm
The other guy don't even know how to slot the ram in order to get dual channel
really speechless

This post has been edited by dblooi: Sep 19 2007, 03:17 AM

Well.. at last i have some spare time to meddle with my brisby.

This is what ive achieved currently,



IMHO, 29.2 sec 1m PI for Brisby is quite an achievement if you ask me. Theres definately much more room for improvements and fine tweaking while i will save it for future free time.

This is my specs currently.

Brisbane 4000+ @ CM GeminII
GA-MA69G-S3H
Crucial 10th Anniversary
Sapphire HD2600XT GDDR4 X2 (Crossfired) @ CM CoolViva Z1
Raptoxx 550W

Im still running my orthos as we speak now, passing 1 and a half hour.
Given the amount of budget i spent on this setup, i must say im very happy with it.

Any suggestion on further tweaks would be deeply appreciated.

oh btw, just to add, on the current screenshot, my 10th anni are running 2.2vdimm

This post has been edited by AoiNatsume: Sep 19 2007, 04:54 AM

what a shame

coz my previous mobo mosly using slot A and C rather than A and B...

so i tot it juz the same... plug both Ann and run without noticing bout those dual channelling thingy..

me so shame !!

loL...
ppl get steam...
haha...
i used to plug in hdd without the power cable...
then check for 1 hr still duno y my hdd can't work...

No need so shame
Everyone is doing mistake, somemore different motherboard different ram position to enable dual channel memory

Haha...Are you joking?

-pWs-

at that time i juz play with timing.. so i set sesuka ati jer.. x oc sampai max pown..
after i play TomClancy..then feel bored, i juz enter bios.. push to the max n safe voltage, then push with quick move.. haha

didnt reach at the limit of ram lagi

You can use 667 divider, don't worry. Crucial 10th definitely won't bcome your bottleneck for any clock that you can reach with this divider. Also , change the ram timings to 4-4-4-7-11-2T. You'll realized that entering 28s is such an easy task.

oic , maybe bcoz i don't call anything b4 1000 as oc , that's y feel so surprise.

haih, you guys really ......
Let u guys see a screenshot, ppl use crucial 10th to hit 1400.
and pls see properly how much vdimm he pumped
is 2.27vdimm , not reading error
of coz , he is doing that for competition, all the ram sub timings already tweak to max loose.

haih, i hope foreign ocer won't be able to find this thread..
if not they will laugh until stomache ( or maybe cry bcoz feel sakit hati for crucial 10th)

aiyo...if wan play low clock, at least tweak you ram timings, make it tighten ma
also, don't suka hati then pump 2.5vdimm to ur ram( ur ram don't need so high vdimm for that clock also)
without proper handling, you might burn ur ram.
even if ur ram don't burn , it might suffer OC ability decrement if u pump such high vdimm for long term usage.

cpu-z validation for that 1400 guy : http://valid.x86-secret.com/show_oc?id=217529

This post has been edited by dblooi: Sep 19 2007, 11:13 AM


Attached thumbnail(s)

ya.. i know..thx 4 ur advice

wth.. is my eyes failing me...? 3.5Ghz with only 1.2vcore on a windsor...?

For me, i only oc once after i've get the ram
DDR2 1200 5-5-4-3-2T
Super Pi 1M 27.125s ( almost enter 26s range )
For those who interested to achieve good Pi result,
can try to look at the ram timing,
maybe you will get some ideas on how to tweak ur ram in order to let SPi run faster

CPU-Z validation: http://valid.x86-secret.com/show_oc.php?id=239459




Attached thumbnail(s)

Yea, im using 667 divider atm.

CPU-Z gives incorrect reading.
look at the unique hardware monitor
it shows 1.67vcore

then u should try 800 divider. What i'm trying to say is you can use CPU/6