ya significantly addup.. not like below 2.9ghz can add little value...
3.0 ~1.45v
3.1 ~1.55v

now my vcore 1.44, vdim 2.15... but orthos fail at 307x9.5, superpi 32M pass oso 1M... do i need add vcore?? temp stil 42C full load... afraid.. haha

---

Added on August 30, 2007, 6:20 pmsetting at 1.53vcore and 315x9.5 fail..
stil testing at 310x9.5

---

Added on August 30, 2007, 7:21 pmcmos reset edi... haha... tired

This post has been edited by xixo_12: Aug 30 2007, 07:21 PM

1.53Vcore failed at 315 x 9.5 ??? A bit too high Vcore IMO.
How about your ram frequency n timing? It might due to ram as well.

-pWs-

mine is cl4

Mind to post some cpu-z screenshot?
I want to know CPU tab and Memory tab.

-pWs-

Guys, how do i identify a 45Watter Brisbane and a Windsor F3? Please advice. I am looking at lower end 3600+ or 3800+ model, with major overclocking in mind.

Thanks.

Check the box.
3800 F3 -- ADO3800CZBOX
BE-2350 G1 -- ADH2350DDBOX

F3 should end with CZBOX and G1 45W should end with DDBOX

-pWs-

this is before..
then freeze..
[attachmentid=286905]
[attachmentid=286906]
[attachmentid=286908]

after cmos reset.. i stay at this
[attachmentid=286910]

i think coz of ram.. just using VS corsair.. wakaka

This post has been edited by xixo_12: Aug 31 2007, 12:53 AM

easy ar to find windsor F3????
have u see any?

easy to find at kl.. hard to find in malacca :sad:

Lower down the ram divider and overclock again. Use 400MHz divider.
Timing make it 5-5-5-18.

3800 F3 hard to find.
Others model very easy to find i guess

-pWs-

This post has been edited by -pWs-: Aug 31 2007, 01:30 AM

important note: trfc settings play a major role in ocing am2, at least for me la, i up trfc from 78ns to 125ns..i can oc extra 300mhz on processor speed, ram is set to lowest ofc =)

This post has been edited by bryanyeo87: Aug 31 2007, 01:46 AM

Yea. You are right.
I set 195ns for 4 stick of my rams.

-pWs-

only set trfc??others to default??going to add more memory to my system. feels lazy to sell this one off. so maybe will get another 2*512mb. will this affect my ocability also by running 4*512mb DDR2???

This post has been edited by rainingzero: Aug 31 2007, 02:40 AM

Yes. With less ram stick, it is more easier to oc and vice versa.
There are a lot of ram timing setting out there. trft is just one of them.

http://www.hardwaresecrets.com/article/26/2
Hope this link helps you to understand about ram timing

-pWs-

This post has been edited by -pWs-: Aug 31 2007, 02:57 AM

nice link. will read through this webpage...thx 4 ur help dude...
this only affect overclockability of the rams only right??or whole system???sorry for noob Q...

dude,im looking for Windsor F3 in KL also tak dapat.
quite high and low also..every shop in LYP...even in sales thread also tarak........
its like non-existance.

since u said easy to find in KL...may i know where to get it?
SC or DC Am2 also can.....

My friend just bought his x2 6000 F3. I think it should be easy to find lor

-pWs-

ok will try..about vdimm .. set at 2.15v can??

---

Added on August 31, 2007, 11:20 ami want change ram 1gb from 667 vs corsair to 2x512 micron D9GKx ddr800.. worth or not??

This post has been edited by xixo_12: Aug 31 2007, 11:20 AM

Do not need too high i think.
If i am not mistaken, 400MHz divider is CPU/10.
You overclock to 3GHz, your ram frequency only 300. Make it 1.9v or 2.0v should be enough.

-pWs-