i see i tot the newer modem/technology will have better wall penetration.
What if i add a wifi repeater in between at the "corridor/walkway"
Or add a mesh better there?

Hi guys, i upgraded from 500mbps to 1gb. Currently am using Deco M5. Should i use the free router for 1gb plan or to get Deco M9 instead?

Does anyone have problem with the Huawei Modem router? Sometimes it drops the connectivity to internet for some of my devices although still connected to WiFi. Other devices will can connect to internet. Weirdly ping to DNS IP works but not DNS host name. It's like it can't perform DNS lookup.

Can TIME perform the installation while my TM service still active?

hi want to ask if i subscribe for 1gbps do time still give this router (in the picture)

Hi guys, wanted to ask if I want to extend my coverage for this model (attached photo) and currently using 100mbps. I should get mesh or upgrade router ? My master bed room currently not really having good coverage which I using Xiaomi extender. Another issue was my CCTV camera got frequently disconnected and I'm still not sure is it because my wifi coverage issue.

Tq.

I plan to buy M9 plus (2 units) for my 1gb upgrade, but do i still need to change the router that i have from time? The huawei router that i have for the 500mbps connection

Hi guys

I need assistance in limiting the bandwidth used by my device. here are the details of my simple network configuration in my house.

- TIME 500Mbps
- TIME Tp-Link LAN Port 1 - connect to my Android TV (first floor of the house)
- TIME Tp-Link LAN Port 2 - connect to my Tp-link Powerline (main)

- Tp-Link Powerline 1 - used for my desktop in the study room (same floor with the main router)
- Tp-Link Powerline 2 - used for my own bedroom second floor (with reusing my old router network bridge for my room)
- devices used in my bedroom include laptops, mobile phones, and a second Android TV

My Internet on Android TV reach near maximum bandwidth (around 300+ Mbps sometimes more). And my desktop (can get the same as my Android Tv speed). However, when it comes to the Internet in my bedroom second floor, the bandwidth only around 70Mbps (max).

NOTE: when all simultaneously used at the same time.

My question, how do I limit bandwidth for my Android TV (first floor of the house) since I do not need full speed to watch Netflix/Youtube? I look at several tutorials, they suggesting use a QoS system limits the bandwidth of certain devices. But when I logged into TIME Tp-link router, and go to QoS, I was a bit clueless on how to configure it out (since in the tutorial a bit diff).

Anyone here has experience in limiting the bandwidth of certain devices for the TIME Fibre Tp-Link router? Or perhaps any advice on how to improve connectivity on my second floor?
Thanks

DAS

I am using the TP-Link EC230.

For my second router in my bedroom, it is D-Link DVG-N5412SP N300 as a network bridge.
Thank you for your input, really appreciate it. Any suggestion on a mesh model that pair up with TP-LINK EC230 (stock TIME router)?

Guys,

Just sub to time and wondering is it easier to bridge the 2 in 1 (modem+router) or ask straight separate modem+router before installation? I'm subbing the 500Mbps. My new router is GX90. Having the 2 in 1 modem+router feel can provide more flexibility. Any thoughts?

Thanks! Just call then to request a separate modem and router. If they don’t remember then will set bridge mode during installation no pro. Thanks for your reply! 👍🏻

FMCO still can install Time ?

I test again with different browser (Edge), previously was using FF. And the result is better than my subscribed speed. Which is good.
Not sure why FF gave lower speed tho.

I am always getting this intermittent dc tho. Is it cause of the instability of TIME or just my router thats giving the problem? Not sure how to troubleshoot.
[attachmentid=10914908]

Just checked my self care account, usually billing due date is on the 28th of the month, but somehow my next billing due date has been shift forward to 22nd July (bill of 28th June). Is this normal?

2nd floor shoplot

Jln Perak, Taman Desa Green, 11600 George Town, Pulau Pinang

I'm on the Time 100Mbps plan (using the TP-Link EC230-G1 router) and there are some dead spots in the bedrooms of my condo.

Want to get sifus advise - should I buy TP-link mesh unit myself, or get Time Omnimesh? Kind of a noob when it comes to mesh, so appreciate any advise you guys can give.

So I don't need an installation person over?

Also, based on experience would this help much? My condo seems like it'd be small enough for any router that doesn't suck, but I don't know if its the router's fault or that the walls are full of lead or something.

Hi,

After its switched to bridge mode, do we need to change any settings at the Huawei HG8145V5?
Example - remains the PPPOE details without removing it ?

Thankyou 

Thankyou