I got " your order (modify) submitted.

But later cancel. Means i wouldn't get turbo?

Noted, i think i will write a python script to help me do that. Btw BTU can be connect via 192.168.0.1 too with static ip address from PC ? I assume it like other router

Change your router. My in laws place is using the ‘cursed’ IP range, and I have changed router for them. They were using the C1200 v1, similar to you, and I bought the C3150 v2 for them, which is much better and their connection is now stable, with full bars on 2.4GHz and 5GHz, and getting full turbo speed of 300Mbps.

Refer to 1st page, 1st post, green text, for list of recommended routers.

of course not. this is 3 in 1 equipment. It can use as ADSL modem for streamyx, VDSL modem for copper UNIFI and also as router for fiber UNIFI. the setup is bit tricky. for me its a good equipment the wireless signal also strong enough anywhere in my house.

I don’t think you can log into the BTU without the proper credentials.

100 - 300 is Wi-Fi speed.

Just plug a cable from your laptop to the BTU port 1 for checking the Link Speed.

Need to eliminate possible issue one by one......

I am referring to Wi-Fi speed. All routers on that list support gigabit speed, or up to 1Gbps, by wired LAN connection.

The other thing he can also try to Use windows buit in PPPoE dialer and set lan adapter vlan to 500 to check is he able to achieve his turbo speed

i think i found the problem, it stuck at 100 mbps when i check status of my lan on PC. Any why we can diy, or i need to call tm ?

nope. i think u need to change the network card into gigabit

Wait wait.....what the problem?

You mean BTU HG8240W Lan port link at 100Mbps instead of 1Gbps when connected to your PC LAN port? (Note: Your PC LAN does support 1Gbps.....doesn't it?)

If this is the case ----> Call TM. Can't DIY.

It's either u still using old network adapter or TM btu locked to 100mbps only.

If u sure your network card is gigabit capable, then u proceed call tm to remote unlock ur btu to 1gbps.

ya i pretty sure my network card support gigabit


Attached thumbnail(s)

Ya tm locked ur btu ad.

Proceed call tm to remote unlock it see they can do or not.

And so I bought... ac53


Attached thumbnail(s)

Ok now dont complain is you didnt get 500++mbps on 802.11ac

deleted

This post has been edited by cwk0713: Sep 17 2018, 12:12 PM

Guys i finally got my 100mbps!!!

I check my unifi plan is still 30mbps but speedtets shown 100mbps already without the technician coming. Still wondering what are they going to do here

This post has been edited by nuel92: Sep 17 2018, 12:11 PM

anyone here with 100mbps already turboed?