Welcome Guest ( Log In | Register )

113 Pages « < 39 40 41 42 43 > » Bottom

Outline · [ Standard ] · Linear+

 -+♠+-LYN Proton Persona IAFM Owners Club V55-+♠+-, The besi buruk counting it's days.

views
     
ex24dec02
post Jun 27 2019, 02:50 PM

Getting Started
**
Junior Member
208 posts

Joined: Dec 2008
From: S.Alam



QUOTE(powerwoot @ Jun 27 2019, 12:01 PM)
no more annoying sound, that's for sure and the engine is feel like a new one, smoooth. But FC is slightly more than before as I can feel. Last time on highway, the reading was about 7.2l/100km, now almost 8/100km.
*
8.0 highway drive is quite high? Average speed?
powerwoot
post Jun 27 2019, 03:06 PM

讨厌的 ubuntu
*******
Senior Member
2,930 posts

Joined: Jan 2007
From: Kolej Universiti Agrosains Malaysia, Melaka



QUOTE(ex24dec02 @ Jun 27 2019, 02:50 PM)
8.0 highway drive is quite high? Average speed?
*
7.8 at 130 - 140kmh, but there was time last month the FC was 7.2 during my ride to JB. I guess the FC reading is not an ultimate as a benchmark. The filling is, last time my RM50 and now RM60 for the same place and distance.
inferno_17_85
post Jun 27 2019, 03:31 PM

New Member
*
Junior Member
14 posts

Joined: Oct 2009
QUOTE(powerwoot @ Jun 27 2019, 10:55 AM)
afaik, getting rid of knocking sound of our IAFM, there is not actual of repairing of it, except of changing to the new or the used working one. Most mechanics out there either they are changed to new intake, or intake without the butterflies in it, or disable the valve for playing with butterflies anymore. We have a retard module without working butterflies in order to get rid of tak tak sound. On negative side, our FC may increase from normal. That's the case of my car as I have been told by my mechanic who did the job.
*
The last time when i done mine with Zordaq, they told me what they did was repair by adding bushing to the flap axle. With bushing, the intake rod will vibrate less and thus no more sound. Short and long air intake still works.
powerwoot
post Jun 27 2019, 03:39 PM

讨厌的 ubuntu
*******
Senior Member
2,930 posts

Joined: Jan 2007
From: Kolej Universiti Agrosains Malaysia, Melaka



QUOTE(inferno_17_85 @ Jun 27 2019, 03:31 PM)
The last time when i done mine with Zordaq, they told me what they did was repair by adding bushing to the flap axle. With bushing, the intake rod will vibrate less and thus no more sound. Short and long air intake still works.
*
I guess mine been disabled as opposed to yours in case to case basis. The last time the sound was terribly noise, louder than the engine itself.
wklow28
post Jun 27 2019, 06:34 PM

New Member
*
Newbie
5 posts

Joined: Sep 2016
QUOTE(powerwoot @ Jun 27 2019, 03:39 PM)
I guess mine been disabled as opposed to yours in case to case basis. The last time the sound was terribly noise, louder than the engine itself.
*
Huh..so terrible? bye.gif

This post has been edited by wklow28: Jun 27 2019, 06:35 PM
powerwoot
post Jun 27 2019, 06:46 PM

讨厌的 ubuntu
*******
Senior Member
2,930 posts

Joined: Jan 2007
From: Kolej Universiti Agrosains Malaysia, Melaka



QUOTE(wklow28 @ Jun 27 2019, 06:34 PM)
Huh..so terrible?  bye.gif
*
yup, cannot tahan with the sound and all solved with RM180.
inferno_17_85
post Jun 27 2019, 06:57 PM

New Member
*
Junior Member
14 posts

Joined: Oct 2009
QUOTE(wklow28 @ Jun 27 2019, 06:34 PM)
Huh..so terrible?  bye.gif
*
Yeah that sounds bad..
The_FQ400
post Jun 27 2019, 11:41 PM

New Member
*
Newbie
5 posts

Joined: Jun 2011


QUOTE(powerwoot @ Jun 22 2019, 11:28 PM)
what kind of polisher did you used?
*
i used Meguiars PlastX and some elbow grease flex.gif

This post has been edited by The_FQ400: Jun 27 2019, 11:42 PM
anakMY
post Jun 28 2019, 05:37 PM

Regular
******
Senior Member
1,450 posts

Joined: Jul 2012
Just changed all 4 engine mounting for RM330 including labour, of course it’s non ori, the foreman said ori one cost 500 haven’t add in labour. Hope it will last.

Add on, also done ECU tuning and injector cleaning , cost bout 135. Now the car feel very light and more powerful and also quiet , less vibration , I think due to new mounting too. Like a new car already.

This post has been edited by anakMY: Jun 29 2019, 08:27 PM
powerwoot
post Jun 30 2019, 03:17 PM

讨厌的 ubuntu
*******
Senior Member
2,930 posts

Joined: Jan 2007
From: Kolej Universiti Agrosains Malaysia, Melaka



Damaged rm280 for 2 new tyres, GY Triplemax assurance. 1 rim need to be repaired, must be langgar lubang before this which I am not aware at all. Adjusted the camber, replaced the valves, some new nuts and bolts, of course alignment and balancing, all at RM430. Feel smooth drive now. Excellent job by the mechanic who did the rim repaired, no longer feel wobbly now.
se@n
post Jul 1 2019, 08:21 PM

Getting Started
**
Junior Member
145 posts

Joined: Oct 2008


Hi sifus, my persona got problem with signal. Not blinking when indicate left or right, however, double signal and lock/unlock car signal working.

Did some research and found out something to do with relay, is that right? Please advice, and thx in advance.
iskazulka
post Jul 1 2019, 08:43 PM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


QUOTE(se@n @ Jul 1 2019, 08:21 PM)
Hi sifus, my persona got problem with signal. Not blinking when indicate left or right, however, double signal and lock/unlock car signal working.

Did some research and found out something to do with relay, is that right? Please advice, and thx in advance.
*
according to my saga, there should be a fuse for turn signal. check that first. fuse box located at dashboard near steering. then there is 1 fuse for alarm / turn LH and 1 fuse for alarm / turn RH. but highly possible is the turn signal fuse.
anakMY
post Jul 1 2019, 08:53 PM

Regular
******
Senior Member
1,450 posts

Joined: Jul 2012
QUOTE(powerwoot @ Jun 30 2019, 03:17 PM)
Damaged rm280 for 2 new tyres, GY Triplemax assurance. 1 rim need to be repaired, must be langgar lubang before this which I am not aware at all. Adjusted the camber, replaced the valves, some new nuts and bolts, of course alignment and balancing, all at RM430. Feel smooth drive now. Excellent job by the mechanic who did the rim repaired, no longer feel wobbly now.
*
GY triplemax assurance 2 or 1? RM140 per piece? thats very cheap for persona's tyres. Seems like there are good review on this triplemax assurance 2. Ppl say very quiet and good wet grip. Im currently on my 3rd sets of toyo neo, planning to change to triplemax if its so good.
se@n
post Jul 1 2019, 09:41 PM

Getting Started
**
Junior Member
145 posts

Joined: Oct 2008


QUOTE(iskazulka @ Jul 1 2019, 08:43 PM)
according to my saga, there should be a fuse for turn signal. check that first. fuse box located at dashboard near steering. then there is 1 fuse for alarm / turn LH and 1 fuse for alarm / turn RH. but highly possible is the turn signal fuse.
*
Found the fuze box, saw a black colour square box with 3 pin on it. I believe that was the relay and I went and plug it out and put it back in, now my signal work just fine.

This post has been edited by se@n: Jul 1 2019, 09:41 PM
powerwoot
post Jul 1 2019, 09:43 PM

讨厌的 ubuntu
*******
Senior Member
2,930 posts

Joined: Jan 2007
From: Kolej Universiti Agrosains Malaysia, Melaka



QUOTE(anakMY @ Jul 1 2019, 08:53 PM)
GY triplemax assurance 2 or 1? RM140 per piece? thats very cheap for persona's tyres. Seems like there are good review on this triplemax assurance 2. Ppl say very quiet and good wet grip. Im currently on my 3rd sets of toyo neo, planning to change to triplemax if its so good.
*
user posted image
yup, you heard that alright, rm140/pc and bought 2 pcs replaced my front Rovelo. Not even 2 years my Rovelo almost botak. The grip is just excellent if I am going to compare the previous. My rear tyres are still good, GY Eagle NCT5 and I am looking forward to replaced it to the same as in front.

This post has been edited by powerwoot: Jul 1 2019, 10:09 PM
iskazulka
post Jul 1 2019, 10:08 PM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


QUOTE(se@n @ Jul 1 2019, 09:41 PM)
Found the fuze box, saw a black colour square box with 3 pin on it. I believe that was the relay and I went and plug it out and put it back in, now my signal work just fine.
*
what relay did it mention anyway?

at least you mention the exact name so that in the future, can be a guideline for others.

This post has been edited by iskazulka: Jul 1 2019, 10:15 PM
iskazulka
post Jul 1 2019, 10:12 PM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


QUOTE(powerwoot @ Jul 1 2019, 09:43 PM)
user posted image
yup, you heard that alright, rm140/pc and bought 2 pcs  replaced my front Rovelo. Not even 2 years my Rovelo almost botak. The grip is just excellent if I am going to compare the previous. My rear tyres are still good, GY Eagle NCT5 and I am looking forward to replaced it to the same as in front.
*
if never do tyre rotation, tyres at front will wear out fast. as you know front tyres tend to wear out faster than rear tyre due to the weight of the engine in front.

i like you before, change only front tyres, then new one put at rear, the old rear put to the front. then when the time comes, i change all 4 tyres then start do tyre rotations. currently all 4 tyres are wear out evenly.

This post has been edited by iskazulka: Jul 1 2019, 10:20 PM
powerwoot
post Jul 1 2019, 10:17 PM

讨厌的 ubuntu
*******
Senior Member
2,930 posts

Joined: Jan 2007
From: Kolej Universiti Agrosains Malaysia, Melaka



QUOTE(iskazulka @ Jul 1 2019, 10:12 PM)
if never do tyre rotation, tyres at front will wear out fast.
*
I am just about to do the tyres rotation and the mechanic showed me the condition of the threads. He said to me, Rovelo used soft rubber, it's cheap but worn faster compare to other manufacturers. The price is rm115 and can still bargain to lower than a hundred, but decided to take the GY instead.
iskazulka
post Jul 1 2019, 10:24 PM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


QUOTE(powerwoot @ Jul 1 2019, 10:17 PM)
I am just about to do the tyres rotation and the mechanic showed me the condition of the threads. He said to me, Rovelo used soft rubber, it's cheap but worn faster compare to other manufacturers. The price is rm115 and can still bargain to lower than a hundred, but decided to take the GY instead.
*
tyre rotation should start from the beginning when change new same brand tyres, then continue do every 10k mileage recommendation and when the tyre condition is good.

that is the proper way to do tyre rotation and how to get properly wear out all 4 tyres.

imo, to get the best experiences on GY triplemax, you should get it on all 4 tyres. anyway, it' all on your decision.

p/s: this is based on my noob non car guy experiences anyway.

This post has been edited by iskazulka: Jul 1 2019, 10:36 PM
anakMY
post Jul 1 2019, 10:30 PM

Regular
******
Senior Member
1,450 posts

Joined: Jul 2012
QUOTE(powerwoot @ Jul 1 2019, 09:43 PM)
user posted image
yup, you heard that alright, rm140/pc and bought 2 pcs  replaced my front Rovelo. Not even 2 years my Rovelo almost botak. The grip is just excellent if I am going to compare the previous. My rear tyres are still good, GY Eagle NCT5 and I am looking forward to replaced it to the same as in front.
*
bro u r not using 195 60 R 15? I try searching lazada 196/60R15 it cost about 180 for 1 piece of triplemax 2.

113 Pages « < 39 40 41 42 43 > » Top
 

Change to:
| Lo-Fi Version
0.0349sec    0.66    6 queries    GZIP Disabled
Time is now: 11th December 2025 - 04:23 AM