Welcome Guest ( Log In | Register )

8 Pages « < 3 4 5 6 7 > » Bottom

Outline · [ Standard ] · Linear+

 LYN PROTON IRIZ OWNER THREAD V9, Fun, meet feisty.

views
     
TSyadea
post Feb 11 2020, 12:49 PM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010


QUOTE(HappySecond @ Feb 10 2020, 03:28 PM)
Hello,
I drive a 2019 Proton Iriz (premium spec). Loving the car so far; great handling, good build quality, amazing ride
Just one jarring issue la, or maybe it's two
Concerning the fuel consumption.
This one time I was driving around and just before I turned the car off, I checked the range; it displayed "300KM". The car sat perfectly still until I got back in couple of minutes later & turned on the car, the range suddenly displayed "263KM"
That's a pretty big drop and it is very concerning. What's going on??

and since we're on the topic of FC,
what can I do to decrease the speed at which the fuel bars go down?
seriously, the bars go down stupidly fast la despite me driving with the eco light on 97% of the time. Tire pressure also often checked
*
I advise to ignore those onboard fuel/range indicators as their not accurate. Use manual calculation whereby u get the mileage after each fuel up(gotta be full tank) then u divide the mileage by amount of fuel u pumped. Else get an app like fuelly(online) or fuelio(offline) to help u keep track.
TSyadea
post Feb 13 2020, 10:26 AM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010


QUOTE(PseudoWoodo @ Feb 12 2020, 12:02 PM)
Why you guys get very high L/100km? I usually average around 5.1-5.5L/100km in highways and 5.7-6.3L/100km in city traffic. Rawang-Midvalley/Bangi depends on site.

Maybe you guys need to change your driving habit if you guys want better FC. This is not a smart car with AI and machine learning built in that can predict your driving habit and improve FC accordingly. Somemore Iriz is a pretty hefty hatchback so constant acceleration is really discouraged.
*
Mostly city driving will cause the problem. Constant start stop consumes a lot of fuel. I suffer jam going and coming back from work everyday where at least 70+ of the journey is move and stop traffic.
TSyadea
post Feb 19 2020, 10:18 AM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010


QUOTE(Jescon @ Feb 17 2020, 03:26 PM)
Now, I'm just worried about the steering rack, since there have been 2 cases reported here as far as I know.

If FC ain't a huge concern (some people see a difference of 2KM/L as significant), and the slight jerks during acceleration from 10-30km/h is not an issue (felt mainly in traffic jams), then the Iriz is really great car to have - especially in terms of safety + comfort.

That's my thoughts.
*
2 cases here means its a rare occurrence. I dont hear people especially Iriz drivers in other groups complaining about this.

Jerks at low speed is due to the Punch CVT being a clutch based CVT unlike say Honda which uses a torque converter based CVT. I believe a clutch based one has less power losses due to transmission.

QUOTE(azyune @ Feb 17 2020, 11:26 PM)
Hi geng, so long since visiting here I forgot about this thread until someone tagged me.  sweat.gif
Looks like theres a lot of new iRiz owners here, nice. I'm still keeping my 2014 till now. Sometimes feel want to upgrade but still sayang this car even after major repair coz already spent quite a lot tongue.gif

After 5 years of ownership I think maybe can spice up things a little but to keep fresh look. Anyone here got use the center armrest that found in shopee? Is it functioning well? Good buy? hmm.gif
*
Can get those plastic PU ones with arm rest extender or those which can raise up. Mine is the raise up one which is rather comfortable over long distance as the elbow can rest on it and I dont need to change gears. Those USB's which comes with it are quite useless thou.

QUOTE(Askzra @ Feb 18 2020, 12:54 PM)
hye guys,

i'm changing engine oil this week (maybe), wanna ask suggestion from u guys what brand recommended?

currently i am using syntium 1000 semi syn SE.

thanks!
*
If car is still under warranty, u dont have much options other than using Petronas EO if ur sending back to Proton.
TSyadea
post Feb 24 2020, 06:00 PM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010


QUOTE(shirohamada @ Feb 21 2020, 09:57 PM)
Iriz 1.3.
Temperature normally how many bar?  2 or 3?
*
Normal is 3 bars. 2 bars on highway when cruising at least 80kmh.

QUOTE(shikuzika @ Feb 24 2020, 08:27 AM)
Going for 2nd service. Already 6 months but less than 6000km.. Rugi rugi  cry.gif

Should I just opt for semi-synthetic? Anyone knows the price? The 1st service I paid almost rm200 for the fully synthetic + 'free' labour.
*
I personally felt that semi becomes sluggish around the 5k mark. I'm not sure if duration also causes it but if it doesnt then opting for the cheaper one would be more cost saving since the performance isnt affected.
TSyadea
post Feb 27 2020, 09:42 AM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010


Just curious have anyone done engine related mods to their cars?
TSyadea
post Mar 2 2020, 09:41 AM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010


QUOTE(kylelim @ Mar 1 2020, 08:54 PM)
I'm Iriz 1.3 MT owner
wan to ask any shop recommend for mod full exhaust system?

prefer Northern/Penang area
*
What recipe are u opting for? Fully titanium? 4-1/4-2-1?
TSyadea
post Mar 6 2020, 10:45 AM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010


QUOTE(Acid_RuleZz @ Mar 5 2020, 11:44 AM)
if you live in the city with lots of traffic lights, i suggest get an auto.
*
I believe u mean traffic jam. At traffic lights, manual drivers shift to neutral and pull handbrake.
TSyadea
post Mar 9 2020, 05:08 PM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010


QUOTE(shirohamada @ Mar 8 2020, 11:26 PM)
top up a bit for honda jazz hybrid.
*
Top up a bit more for prius c.
TSyadea
post Mar 12 2020, 11:33 AM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010


QUOTE(hawk1lo @ Mar 11 2020, 11:16 AM)
but i notice sometimes the car takes a few crank to start once a while, not too sure is it related to battery
*
I too have this issue sometimes. Sometimes cannot crank till start on first attempt. Need to try again. Sometimes crank but engine will idle at around 500 rpm then die off.
TSyadea
post Apr 17 2020, 04:37 PM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010


QUOTE(nonequal @ Apr 16 2020, 11:33 AM)
yep in term of handling i’d say neo/gen2 fare much better, but then the neo comes with more sophisticated set of rear suspensions and lower center of gravity.

i think my car only used for faring people and stuffs within the COE center and been parked for a long time before actually selling it off. IP noise kit from Proton also not yet installed as well. But for the price I pay, i still think it’s worth it.
*
The kit is free.
TSyadea
post Apr 22 2020, 10:57 AM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010


QUOTE(nonequal @ Apr 18 2020, 02:13 AM)
how long usually it takes to get it done?

the improvement is worth it? I drove Socar iriz 2017 version before buying the 2014 one..and can easily tell the car is more refined than 2014 - 2016.
*
I think hours to a day. Its supposed to get rid of the rattling.

QUOTE(Evirober @ Apr 19 2020, 08:05 PM)
Ignition Coil Question :
Guys please advice, I wanted to change my spark plugs on my last service but the car shop said that the ignition coil is stuck and it may break if the yank it out. I checked online and the issues I think its the ignition boot.

The shop wanted to charge me  RM160 per ignition coil, I checked online it only cost RM 80 for ORI and 65 for OEM version. Can anyone advise how best to remedy this? Thanks
*
Find another shop?

QUOTE(Lez Pall @ Apr 20 2020, 08:54 AM)
If they want to, they can just reuse the current Iriz platform to build a new model just like what P2 did with the 3rd Gen Myvi. Just optimize it for better roominess.

Geely unfortunately doesn't have a B-segment equivalent to an Iriz/Persona and the ones they do have are very old models.
*
Geely can take the iriz chassis and design their own and brand it under their own name
TSyadea
post Apr 28 2020, 09:25 PM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010


QUOTE(laytiong @ Apr 27 2020, 05:02 PM)
correct, you can fry electronics by not having btry to absorb the excess charge from alternator.

Loose radio settings is lower risk.
*
Those battery shop fellas will do this not for the radio settings but for other things. My case after replacing battery, EPS need to be recallibrated and check engine came out with 2 errors (ABS and immobilizer). Cleared both errors.
TSyadea
post May 1 2020, 11:35 AM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010


QUOTE(homerthewhopper @ Apr 29 2020, 08:19 AM)
Hi guys I want to install a reverse camera for my wife's car but don't know how to access the reverse light.

Can I take out the whole back light just by removing the two screws? It seems loose but I'm afraid of breaking it. Are there clips somewhere that I missed?

Looked for tutorials on yt and Google but couldn't find any

Thanks for the help
*
Unscrew and use a pry tool to try and pry at the edge near these points. They should just pop off with a bit of force. The light assembly is strong enough so it wouldnt break.

user posted image
TSyadea
post May 27 2020, 10:14 PM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010


QUOTE(wjang85 @ May 24 2020, 07:41 AM)
Hi guys,

Couldn't agree more that Hankook is the best bang for the price. But unfortunately, Ventus v12 Evo2 (k120) is no longer available in Malaysia & it's being replaced by Ventus Prime 3 (k125), which is a touring tire, not UHP as the former. I found out these from the tire dealers bcoz I want to replace my front PS3 which the tread depth is low & having chipping and peeling issues. Now that I'm in a dilemma to give k125 a try or stick back with PS3. But I read around that chipping & peeling issues r very common for PS3.

My current setup is Front PS3 & Rear Ventus v12 Evo2. Bcoz my earlier front PS3 is having the same problem & I rotate the rear set to the front & replaced the worn-out one with Ventus v12 Evo2 at the rear. Should I give PS3 another try or is there any alternative for Ventus v12 Evo2?
*
Yes their supposedly known for chipping but I didnt suffer from chipping(or too minor to notice) until I went to sepang.

QUOTE(ayamxxx @ May 24 2020, 07:45 AM)
Is the ps3 still widely available in market? Believe it is replaced with ps4.
*
PS3 still available for 15" while PS4 is 16" and above.
TSyadea
post Jun 1 2020, 10:37 AM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010


QUOTE(lol~ @ May 28 2020, 12:32 AM)
Well that is something cant be done. My area open space car park. I agree, i only trust brandless tyre if the review is good. Well all brand of tyre start somewhere. Last time falken considered brandless but they made it to mediocre tyre. Even some model consider good. And the other way around for branded tyre. Some branded tyre produce poor performance model like the famous goodyear nct.
*
Falken's are what I consider shit tyres. Grip idk but my family, 2 cars used it. It can even shread itself till metal is exposed or get swollen. Both Silverstone and Falken are in my black list and I highly discourage people from getting tyres from these brands.

QUOTE(shebbycs @ May 31 2020, 10:47 AM)
May I know how u all pump iriz tyres? it is follow specification such as

for 1 - 3 person -  front - 210 rear - 190
for 4 - 5 person - front - 210 rear - 220

is it normal if I not pump my tyre around 3 months my rear tyre psi will be at 120 - 150?
*
I pump around 30 psi monthly.
TSyadea
post Jun 15 2020, 07:41 PM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010


QUOTE(ayamxxx @ Jun 11 2020, 07:09 AM)
I just amazedt that he was from gen2 to iriz. Which both are using the same campro engine & He might expect it to deliver the same type of power delivery etc. Different is campro vvt (not much different and less power if he was from campro cps in gen2 + cvt)

But the punch cvt is a joke in cvt categories, others cvt were more direct, straight power feel and better fc. We should blame on proton technical department who come out with Punch brand selection for their model. They had a Jatco cvt from inspira during the iriz, persona, preve, suprima design phases, how come they evaluate the punch cvt until it end up in production.
*
QUOTE(Helldiver @ Jun 11 2020, 03:38 PM)
It does go without saying that the Punch CVT (and I suppose with all clutch-based CVTs) is not as great as a torque converter-based CVT, but the tuning has improved tremendously. To me, that's a great feat la, can improve a clunky thing into something pretty solid. Though, as with all CVTs, it's bound to die early compared to other transmissions - that's a given fact (and one I accepted when I bought the car). Still see a lot of old Iriz, Preve, Personas still going around strong  hmm.gif
*
I believe its just pros and cons of using a clutch vs torque converter based CVT.

Below is just technical opinion based on my understanding of both a clutch and torque converter:
1. Torque converter can control the slip during launch/moving from stand still better(more linear) compared to trying to slip the clutch(I believe the computer will either half clutch suddenly or pump the clutch like abs)
2. Torque converter has probably higher power loss than using a clutch.
TSyadea
post Jun 22 2020, 10:04 AM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010


QUOTE(arief_jezza @ Jun 19 2020, 07:38 PM)
How to open those dome light. Mine kaput after 3 years. Thinking of getting led from shopee. Have no idea where/how to open the light. Thanks
*
According to proton's manual(which I checked yesterday as I was replacing mine to LED), it says to pry open the light cover between the light cover and the grey housing. This should only remove the transparent piece only. For all sides pry at the side where the switch is.

QUOTE(mls_gamer @ Jun 21 2020, 12:28 AM)
Guys, Yokohama Advan Fleva V701 or Michelin Pilot Sport 3 Tyres for proton iriz stock 15" rims ?
*
According to my friends who use Fleva, they claim the tyres are good until it overheats(normal twisty mountain roads it can overheat easily). Using PS3 so far no issues except the common chipping problem after I went to Sepang.
TSyadea
post Jun 22 2020, 11:17 AM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010


QUOTE(ayamxxx @ Jun 22 2020, 10:13 AM)
regarding on chipping, peeling at outer side of tyre, that is still happen to PS4. i guess that the trade off for a good grip.
someone on tyre tread informed that we need to drive gently on PS3, PS4 to prevent chipping problem
*
I have been occasionally hard on the tyres but it didnt chip or if it did it was too minor I didnt notice. Only after whacking it in Sepang thats when I noticed.

QUOTE(jVIPERs2 @ Jun 22 2020, 10:18 AM)
Obviously many don’t bother to read the manual...
Easier to just post question and wait for answers doesn’t matter right or wrong...
*
I remember it was in the manual thats why I opened it up to read. Don't wanna to fix something and end up creating a big mess. For them biasa dy. FB, whatsapp, lyn all ask.
TSyadea
post Jun 22 2020, 03:12 PM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010


QUOTE(annas473 @ Jun 22 2020, 02:20 PM)
ad08r
*
That day got someone selling RM7xx. About 50% or more thread left.
TSyadea
post Jun 29 2020, 10:31 AM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010


QUOTE(wjang85 @ Jun 27 2020, 05:19 PM)
Anyone encountered this problem before? The brake warning light illuminate randomly while driving. Not always happen. But when it lights up, it'll remain there unless I shut down my engine & restart it, then it's gone. Checked that brake fluid is in normal range. Brake pads are not worn out yet. Handbrake is fully disengaged too.

user posted image
*
Sounds like possibly a handbrake switch issue.

8 Pages « < 3 4 5 6 7 > » Top
 

Change to:
| Lo-Fi Version
0.0291sec    0.28    7 queries    GZIP Disabled
Time is now: 8th December 2025 - 01:34 PM