Hi all, I just bought this router during 11.11, everything working fine, but my hikvision Cctv not able to connect using external network, any idea sifu?

Disable IPv6, and are you on private IP? What is your current IP?

Managed to get it view after setup a few port forwarding.

Thanks

Previously in the Unifi old router I don’t need to set all these

Update on Unifi tech home visit today. The tech changed the modem and viola... I'm getting 100+ mbps on both wifi and wired. Thanks to SilentVamp and neurom. Cheers!

Errrrr.....replace modem or router?

This post has been edited by gin&tonic: Nov 17 2018, 09:30 PM

modem (BTU). Nothing wrong with the router. Both dLink 842 and tenda also can achieve 100+ mbps. Was on the old Unifi modem, issued since I subscribed to unifi when they first launched it.... The tech was reluctant to change, saying 90+ mbps is norma.. lucky thing I told him that on the lowyat forum many users are able to achieve 100+ mbps... then only he changed the modem.

Hi Bro, how bout ur Wifi speed using turbo speed of 300Mbps? Modem using default TM provided punya?

Getting full speed on wired, and on my laptop. Mobile getting 250-300Mbps in same floor with router, and on ground floor, probably 150-200Mbps. Using TP-Link AC3150 v2. Definitely not using TM stock router lol.

This post has been edited by SilentVampire: Nov 21 2018, 02:54 PM

Lol..guessed as much bro.. so if I were to only change my router to Tenda AC18 and still use the Huawei modem (Huawei HG8240w) provided by TM it would not do me any good eh...in terms of getting the max speed from my Turbo Unifi 300Mbps package.

This post has been edited by arvind13: Nov 21 2018, 03:24 PM

Why not? Tenda AC18 is more than capable to go to 300Mbps.

I place my Asus AC68U at living room then connect my Tenda AC18 on 2nd floor hall via built-in-ready wall cat5E networking cable. Try to set the Tenda AC18 as AP mode but to no avail. There is no option to set AP mode, only wireless repeater. So decided to download international firmware US_AC18V1.0BR_V15.03.05.05_multi_TD01 without the Unifi support and succesfully set the AC18 as AP mode.
Why is it local firmware does not include along AP mode option?

you can always do it the old school way when there is no dedicated AP mode

- set your ip to something different from the main router but in the same subnet
- disable DHCP
- plug the cable to any of the LAN ports (not the single WAN port)
- wifi: configure at will, don't have to match main router

1 benefit of a dedicated AP mode is you can use the WAN port to connect to the main router instead of the LAN ports (not sure if this apply for all routers though)

which firmware you are using? My firmware V15.03.3.11_multi port forwarding is not working

is anyone able to unbrick the bricked Tenda AC18?

try poke reset while turn off then only turn on power

AC10U(Malaysia) same as AC10(China)?

Already tried but still cannot enter into cfe recovery mode. Only the power led is on.

Bought a Tenda AC10 from Taobao China, ￥99.00, do I need to flash Merlin firmware or stock firmware?

send back tenda.

not sure whether merlin support it, also if China firmware doesn't support Malaysia unifi only can use as AP.