QUOTE(GameSky @ Feb 16 2023, 11:04 AM)
got a bricked unit , anyone got link how to debrick the router?
Try to boot into CFE mode, see can or not first.
If yes maybe can try flash the default the right Firmware.
Need alot of practice to go in CFE.
Sorry I can't remember that well.
Something like
1) disconnect power cable
2) make sure your PC set to manual IP, 192.168.1.XX or 192.168.0.XX.
the 1 or 0 depends on router default.
3) on your PC keep running ping 192.168.1.1 (depends on router previous default set)
4) connect the power (make sure ON button stay on before power ON) + same time pressing reset button for either 20 or 30 sec until your ping detected.
5) after detected quick login to router IP, 192.168.1.1
(note CFE boot will close if does detect login within X secs). Then you have repeat again.
This is just roughly what I rmb only, don't shoot me if it doesn't work.
This post has been edited by muncheno: Feb 16 2023, 08:47 PM