unfortunately that means we r not able to use the MESH features in 384.xx firmware although the hardware is capable of it

it's illegal to use asuswrt at first already... I never expect it to work tho.

but it did and just be grateful that we are able to utilise the hardware as RT AC68U for half the price

yea 68u new revision all comes with 1000mhz by default aldy.

thanks,doing it for first time just for learning purpose..manage to upgrade firmware to 380.70_HGG-FINAL..your simple step really helps.. thank you again

and yes one more thing..on 380.70 HGG-Final...should i be worried if my CPU temp constantly around 70 Celsius ?

nope if you without cooler that was pretty low already, it can goes up to 80+

great,thanks

Do anyone here has the step by step guidelines on how to flash the TENDA AC18?

can u guide on how to upgrade the firmware? do I download the 2 files in one zip file and then just do firmware update from the current tenda UI?

Appreciate for your help.

Try to read back posts before find some clue there.

anyone got AP mode like in this picture? i can't find it in standard ac18 firmware (MY). merlin firmware got AP mode?



nvm solve update ac18 international firmware got AP mode

This post has been edited by AsuKi: Feb 7 2020, 07:17 PM

if not mistaken AP mode is not available in the stock firmware. Merlin Does have. You can always set ur own ap mode by disable DHCP and fixed router IP same segment as ur main router.

Due to my hand ichy, I had flash US_AC18V1.0BR_V15.03.05.05_multi_TD01 and I've couldn't connect to my unifi, confirmed that my userid n password is correct and keep getting

Connection Status:
No response from the remote server. Please check whether you can access the Internet using your Modem, if the problem persists, contact your local Internet Service Provider for help.

after download the original firmware and flash, US_AC18V1.0BR_V15.03.3.11_mutli_LAS01 it has the same problem...

any solution?

it should work, did you choose Unifi as profile that has VLAN setting

of course, i confirmed that.



can i perform factory reset?

yes, never encountered this issues before as I switch between Merlin and stock 2-3 times already.

This post has been edited by prokiller1199: Feb 16 2020, 02:32 PM

works good now..
now sure why from a bad firmware flash to original firmware and it cant connect to unifi...hmm

Lan - IPTV not set to unifi mode ?