Saw one lbs ads selling at rm4300 (105)
Maybe the one you posted the GS spec higher tier

i just got a Sava Z1 from 9.9 lazada sales
the design is good but i really dunno its specification

This is before change the wheelset.
Just installed the wheelset.

But need to grind the backpart of the frame a bit.

Attached here 2 foldie

Trinx ka2024 swapped litepro hollowtech and ruitoo wheelset ( my brother one )

Mine is 1606 swapped 349 wheelset, need to grind the back frame a bit( near to the place where we install the stand).

Aiya. Forget to get a pair long arm v brake..

aiyookk? no need to grind if ur using schwalbe kojak tyre. the max ngam² tyre height is 32mm, that is kojak for 349.

i've tested innova tyre 349, claim it to be 32mm height, but i think it might be higher as i cant pump more than 80psi. that tyre recomended to pump 100-120psi, but higher than 80psi the tyre became bigger and will stuck at my friend gust frame

aiyookk? no need to grind if ur using schwalbe kojak tyre. the max ngam² tyre height is 32mm, that is kojak for 349.

i've tested innova tyre 349, claim it to be 32mm height, but i think it might be higher as i cant pump more than 80psi. that tyre recomended to pump 100-120psi, but higher than 80psi the tyre became bigger and will stuck at my friend gust frame

Tires need to pump so high? I only pump my marathon racer 25psi. Is it too low? 
I press with my fingers macam very full already. I scared the tube and tire explode 

No choice, kojak 349 super expensive now. Lol $70 rm200 per piece.
My brother do some tweak on that part, knock knock a bit .

Super tight clearance,  pumped around 85 psi or more, can't remember

But rolling speed improve tremendously, and faster, whole bike also lighter now, I think the new wheelset lighter.

Maybe will get kojak / marathon racer next time, saw one guy at Ipoh also, he using 349 + marathon racer on the 1606 trinx.

Tires need to pump so high? I only pump my marathon racer 25psi. Is it too low? 
I press with my fingers macam very full already. I scared the tube and tire explode 

u cant fit marathon racer coz its 35mm height if im not mistaken. last time im on the same dilemma after converting my dabike to 349 wheels.

the thinnest tyre for 345 is joseph kousac that is 23mm, 2nd is kojak that is 32mm.. but u know lah, joseph kousac price is like a bomb!
its like channel handbag for brompton
hahaha... i pump 100 at the rear and 80 in front for on the road. so far no problem lah. if touring i pump 80psi at rear and 70 in front for comfort

Harga macam sial

video will be difficult to take while cycling     it's either the handlepost folding joint (or inner bolt) or the quick release to extend the handlepost higher up  :confused:  e.g. when go over a road bump, *ngek ngek* (twice) sound. Then no more sound if flat road. Unless I use my arm to horizontally force push-and-pull the handlebar -> the handlepost will have that *ngek ngek* sound.

Freewheeling = no squeak sound. Should I put lubricants on the RD gears ? Long long long time ago (not this foldie), used to just put Singer oil.

Thanks again bro.

I scare pancit, so thinking if can fit marathon racer.

after I went out for a ride on Friday night, then Saturday I realise my front tayar air a bit low.

Then I dismantle my tube and check, but can't find any leak. I repump, and now so far no leak already.

Look like I am gonna be careful when riding , cannot just hantam the road,

Remember I asked about what tyre to change to, few months back? Before MCO. Got myself a pair of "superdiamond" which was said to be made from same factory that made kenda kwest

Ini la akibat wana save budget. Pakai tak sampai 200km pun. Dah koyak tepi. Dunno what's the cause. Lepas ni kena jugak beli tayar branded2 macam schwalbe

same factory

Tires need to pump so high? I only pump my marathon racer 25psi. Is it too low? 
I press with my fingers macam very full already. I scared the tube and tire explode 

so far kojak i already hantam many road even crusher run road. so far no problem la.. except sandy places u might slide lah
kenda also got same issue like this. i had expirienced same problem before. the best & durable tyre still schwalbe, but its bumpy and not comfort

This is before change the wheelset.
Just installed the wheelset.

But need to grind the backpart of the frame a bit.

Attached here 2 foldie

Trinx ka2024 swapped litepro hollowtech and ruitoo wheelset ( my brother one )

Mine is 1606 swapped 349 wheelset, need to grind the back frame a bit( near to the place where we install the stand).

Aiya. Forget to get a pair long arm v brake..

Looks good, mind to share what you've upgraded and cost of upgrade? Thanks.

Recent upgrade
349 wheelset  RM250
Innova 349 tyre RM160
Dahon handlepost extender RM40
Litepro handlebar RM40
Litepro seatpost ( this pic is before changing) RM60

Previous upgrade ( few yrs back)
Tiagra rd
11-28t 9 speed
53t crankset
Avid sd3 brake
Novatech rear hub , swapped to 349 wheelset