Hi Guys,
does anyone know what is this features for this black dots on the rear mirror?
planning to stick the dash cam on this area..will affect any problem?
thank you : )




This post has been edited by cool3125: Jun 22 2017, 08:07 PM

basically nothing
some says to prevent glare at the HU

Hondata is for what? Pick up? Can 1.8 fit in ah?🙂

Any idea guys? Another stone chip appeared.
While it is tiny, it is direct in front of my engine bay

Any shop to recommend?

hondata is a piggyback ECU company tune honda car become more HP and torque..
user friendly can tune from OBDII

I am at Yong Ming Honda SC for 20K+B service now.

20K labour : RM71.55
SN 0W-20 EO : RM145.06
Lub Door & Rubchannel : RM3.18
Oil Filter : RM32.86

Asked them to refix my Front Passenger seat trim & Update VSA Modulator.

Total servicing cost : RM252.65

Thanks for the info. Im going for my 20k servicing next week too

Celebrating my car 1st yr bday soon.. lol

Said too soon, estimate was slightly wrong coz forgot to add a few things. Final figure:

20K Service Labour: RM71.55
Engine Oil Change Labour: RM39.75
Oil Filter Change Labour: RM15.90
SN 0W-20 FS Engine Oil: RM145.06
14mm Washer Drain: RM1.89
Lub Door & Runchannel : RM3.18
Oil Filter Cartridge: RM32.86

Total Servicing Cost: RM310.20

They forgot to reset my Maintenance Minder Oil Life, so I just reset it myself

nowdays FS engine oil can get below rm150 for 4liters...

i do it outside for the tire rotation/alignment?

Yup, our engine needs slightly less than 4L of engine oil. My old FD2, needs about 4.5L.

IINM, 0W-30 is RM186 for 4L.

Yes, tyre balancing, alignment, rotation just do outside at a later date. But most config still using old Honda Civic's config. Dunno ok or not...

i never bother to do it outside although it is much cheaper.

not sure if i should do it next time.

I would've done it at the SC, but they're not offering it today - no staff coz most are already on leave.

It's recommended that we should do it every servicing for more evenly weared tyres.

It is actually a "non stick zone" to prevent you from tinting there, this is to ensure radio,IR are able to transmit through. Which if you see at your tinting, it is only up to the dot area.

But of course the thinner films can still tint across without issue.

At least no added items, I did complaint to HMsb in May

what is lub door runchannel?

anyone feel the door hard to open/close?
any solution or can complaint SC?

Lubricate the door hinges, and side windows runchannel. They usually just spray the lubricants

and this cost to us?

Small cost RM3.18. Dunno if other SC charges or does this as this is charged and performed by my SC under additional items.