Go look for rotary hammer in Mr DIY.

Hi,

Anyone with experience in rotary buffer (eg Makita 9227C/9237C)?

I got a few 7" polishing pads and compounding pads. wondering whether I should get a SKIL for RM299 or so, or midrange Hitachi, or bite the bullet for Makita.

Besides polishing/compounding work, is it suitable to be used as a sander for wood?

Can try those cheap Osji/Skil drills and bits you can get from hardware shop.

Hi All,

I have corded rotary drill and cheap corded bosch driller. What tool should I next? impact driver? I'm new to DIY

You collect tools or doing something?

Tools very much depend what you want to do.

Need advise. I got a Black & Decker 710W KR704REK which I redeemed with my credit card points about 10 years ago.

Is this model good enough for drilling concrete wall?

I am not sure if I used the wrong type of drill bit. I find it tough to drill concrete wall.

Thanks.

Always refer back to their tech spec here

This machine can do masonry up to 13mm hole diameter and always use the correct drill bit to do the job.

lol....soli soli. have been missing in action lately. the L-Boxx mini idea is still on but have been put on hold.

trying to be cheapskate by cutting the dividers of those drill boxes and use as carrying case...onli problem is can't put 2 boxes in a L-Boxx




Attached thumbnail(s)

im planning to buy bosch GBH 180 cordless drill..is it i need to buy key chuck adapter to use normal drill bit?i dont really understand sds function on this drill..can somebody explain it in layman term.. TQ very much

Hi Sifus,

I wanted to buy a drill for all around use (into my condo wall etc.)

Im looking at this: Bosch GSB 180-LI. Do you guys think this is strong enough for concrete wall? Or do you have other suggestion?

Thanks!

I'm using that for my DIY Home Renovation. So far, it can cater for all my usage. Drill concrete for brackets, ceiling, wooden frame, etc..

As long as your holes doesn't not exceed the specification shown, it's good..

Okay thanks. I think im going with this one. Found one online for 529 with bosch 33pcs x-line. Is the price good?

Go get a L-box la.

Go CT hardware shop buy. Cheaper than online. Just found out.

CT selling L-Boxx mini?

Normal S,M,L sized already have

This post has been edited by mryen: Jan 23 2018, 10:35 PM

Normal L box only. But I see the price is cheaper.

Today go CT brought some dremel accessory. Price also cheaper than online.

CT only 6min from my home.

got a dong ffeng grinder.

is it normal that the blade is only secured with the top screw in piece and there's no slot for the blade to sit in like a drill does?

To make it simple. Normal hammer drill is like you hold a nail with a plier then HIT THE PLIER instead of the nail with a hand-held hammer.

While with SDS system you are holding a nail with a plier and hitting right behind the nail.

Adding to that, if you look from engineering perspective, there are so much inefficiency in normal hammer drill. It is actually a face gear bumping onto another. Thus produce a lot friction. It will be worn and used-up fast.



One big difference you can notice is the impact rate between these two systems.

This post has been edited by odour_stop: Jan 24 2018, 06:44 AM

SDS referes to the bit mechanism

What you are explaing is the rotary function


Apahal CT online jual mahal? 3rd person to tell me that. E.g. Bosch Saw RM1200+, but online is RM1400+

Not bad, I bought mine 500 and I has to add in drill bits myself.

You don't think all seller sell thing online is cheap.

It is just convenient. But never be cheap.

Probably encourage you to buy at their shop.

In shop, collect cash. No additional fee or 3rd party like online. No courier fee. No online website charge.