no one selling l-boxx mini in SEA region unfortunately...i guess the only place to get it is from ebay atm..

both are the same

in some countries, they use the 10.8 voltage (which is the correct voltage since 3.6v cells x 3 = 10.8V)

in some countries, due to marketing strategy, it is marketed as 12v (blame this on DeWalt)

the suffix -76 refers to the disc size, which is 76mm (3")

the other sizes are 100 & 125 but for 18v system

this is mine


and this is how i usually use it (yeah, dangerus with protector off, but pls always wear adequate PPE and observe your disc condition)

bro, mind to take lead for this L-boxx mini gb?  Really appreciate it 

it just disintegrate itself by making weird noises. out of 10 discs, 3 became like this

i observe this always happens with disc that have metal rings pressed in the middle

this is the thinnest cutting discs

that's why i prefer to use the GWS12-76 to cut bolts and screws nowadays. the discs are very sharp and durable. i still havent gone through my 1st disc yet. LOL... and i have plenty, i mean REALLY A LOT of the 76mm discs in stock. i hope i can finish them before past its expiry dates

i want 1 set.
old newspaper 1 set.
you 1 set

who else?

yeah, this was from their sales brochure



need to preorder. i didnt ask the girl in charge how much it is cos she busy with other customers.

Anyone know good dust blower? Something to use to cleaning dust inside cpu.. My brother bring back from US few years ago.. Around the size of bosch go. Try to search for blower, but only found big size one... Like use to clean up dry leaf.

Single or dual battery version?
If single 2AH battery sometime might not be enough.

@mryen

I dont know how to tag. The deal still got? U guys havent proceed with the purchase?

Go get a L-box la.

Go CT hardware shop buy. Cheaper than online. Just found out.

I also want one set
so the bulk list is here:

1. lucifah (no ayam not gonna be the one doing the buying from SG LOL)
2. ar188
3. odour_stop (I can collect from KL)
4. Yushin (collect in Subang)
5. Ozak (Collect in Sunway, Subang, Puchong, PJ)
6. Yen

So who do the buying ?

What is the purpose?

Just brought a Proskit cordless Mini grinder. Not a powertools but mini tools. Run on lithium battery. Charge with USB.

I alway look for a small handy grinder for grinding small part. Lazy to takeout the Dremel for short time job. Saw this in a electronic shop and straight away brought it.

Cost RM95 without gst. You can get it at shopee for RM95.

It is not that powerfull. The torque is like you can stop it by hand. But it enough to do some small job. It have a safety protection where it will shut off if force the motor stop. 3 speed to select 5000, 10,000/ 15,000. The collet can just tight by hand. Have a run time about 1hr. All the Dremel tools can be use on it as the collet diameter is Ø3.2 and Ø2.4. Very light only 90g.



Come with the grinder, usb cord and some grinding/sanding/brush tools.



Thought want to modify it to get a better torque and longer running time by swap out the battery. But the battery too small and probably the torque is limit by the board.