It works, thanks.
I can get about 150-160mbps using RE300

Hi,

I actually wish to buy a new router. Considering ax73 with onemesh extender. But comparing to deco m4 2 pack which is cheaper but doesn’t support WiFi 6, is the coverage, performance and experience using ax73 with extender better than deco m4? Thanks.

Actually both are different, AX73 with OneMesh extender is AX and M4 is AC. If your home broadband package is between 100-300Mbps maybe you can consider M4, it will be more stable and realiable.

I was thinking to get OneMesh extender too, but it hold me back, maybe you can do some study before you buying.
I saw this review, this guy comparing OneMesh extender + OneMesh Router, work as OneMesh and Router + Extender, seem like the performance of OneMesh extender + OneMesh router is not as good as remain the extender to work as extender https://youtu.be/ojnBVDbFhGw

And from my study, I not sure why OneMesh extender is so expensive compare to a router, this is what I can't understand.

all this is my humble finding, maybe some sifu can help to here??

Hey guys. I want to ask I have 1 access point in my house and my main router is Tplink Archer C1200. I cant find the setting that limited to my router internet speed. Is this router got this features?

What is the Celcom fibre Vlan tagging for tp-link router Archer AX20?

Actually I have buy tp-link Archer AX73 and how to setup to digi fibre and may I know digi fibre have vlan function?

Celcom 1 Home (Celcom Timur Infra)
VLAN ID : 101

Celcom 2 Home (TM Infra)
VLAN ID : 623

This post has been edited by aniq8676: May 5 2021, 04:12 PM

Im unable to use my w9960 to bridge mode to connect to unifi. only able to use as direct connect ppoe from the modem/router. i have miktorik router to use as my main router.

no problem using my current setup. huawei modem as bridge to miktorik as main router.

Yes

DIGI (DIGI Infra)
VLAN ID : 1001

DIGI (TIME Infra)
VLAN ID : 221

DIGI (TM Infra)
VLAN ID : 629

DIGI (TNB Infra)
VLAN ID : 1400

DIGI (Celcom Timur Infra)
VLAN ID : 150

This post has been edited by aniq8676: May 7 2021, 05:06 PM

Anyone facing issues with random disconnect/reboots for AX20? I'm getting it rather frequently and it is getting to be really annoying.

I see a firmware update (Archer AX20(US)_V2_210128) was released in February to fix this but it was only for v2. Any news for v1.2? Or has anyone tried updating v2 firmware to v1.2?

mine is 2.0.1 build 20200915 AX20 Msia, no issue and in fact, working very well

maybe u need to reset the router setup all over again just in case if probelm persist

This post has been edited by StevenL: May 5 2021, 04:32 PM

Yeah, I tried that before but the problem came back. Since there is a firmware update that fixes the issue, was hoping can upgrade to that instead.

Do you guys know is Tplink Wa-901N as a access point good enough? Can this device limit speed?

Can I check if I am setting up TPLink Mesh X20 in AP mode instead of being router, will this affect network speed and seamless roaming? Thanks.

Go under QOS setting to put specific speed for devices

Can I direct set the access point on the limit speed? Examplle my speed is 30mbps . I want all the device who connect to the access point only get maximum speed only 10mbps. I know we can do this but because my access point got problem, i cant login and check. I only can login into my main router.

Anyone with archer C1200 and archer AX10 cannot change dns? If i change both ipv4 and ipv6 dns to cloudflare 1.1.1.1 doesn't take effect, keep using TM Net dns. Why?

are you sure you put the correct DNS number

For IPv4:
1.1.1.1
1.0.0.1

For IPv6:
2606:4700:4700::1111
2606:4700:4700::1001

After entering the correct DNS number, make sure you restart your router.

Yea both are correct and I've restarted many times already and no change. Previously with streamyx can change no issue also.

I have used Archer C1200 from Unifi and have never had problems using third party DNS