The looks of the diamond seats are nice, but not very practical, this is what I heard from my cousin, dust easily stuck over there, maybe one of the reason latest advance seats all changed to flat surface

But outside should be cheaper right, looking for nice armrest now

You mean the toggle 'horizontal' switch (for controlling auto down/up for driver window) at the bottom of the 4 window buttons is spoilt ? I think can just claim warranty right?


https://www.carlist.my/news/perodua-bezzas-...atteries/39842/


IMHO, to use or not to use is NOT to avoid problems as the Bezza 1.3 Advance is already designed for it (Eco Idle) with the more expensive components...; so problems 'should' not occur
If you use it, obviously your components will wear out faster than not (but you will save fuel)

As for me, I find Eco Idle not suitable for KL traffic; more suitable for my weekend driving with less traffic and having engine stopped for 1.5 to 2 minutes at the traffic lights.

This post has been edited by tigerporc: Apr 26 2017, 10:39 AM

I didn't think of that. So that's a yes to body kit and a no to the diamond seats.

If have nice armrest can let me know, now no where can place my phone. zzzz

Just only the driver window button faulty the another 3 button were working fine include the lock window. The button with the letter A on it. Going to call the service center see can claim warranty.

That's what I'm picking right now, I pick the stylish kit rather than just dynamic bodykit alone, with extra door visor and door protector, try to look at it

http://www.lazada.com.my/perodua-bezza-pvc...g-23450196.html

this is by far the nicest armrest, overall looks quite nice and better quality than others, but gf don't allow me to buy now T_T

my sold idsi city eps also won't act that way



using this armrest

Don't like the red stitching....

Did you open your door panel recently? This happens if the connector to the door control panel has been disconnected. The solution is simple. Put your car into ACC (put your remote nearby, press on the START button without pressing the break). Then, with the door window already fully up, press the window button UP continuously for 5 seconds. Now, press the START button 2 times (without pressing the break) to switch off the car. Now, start as normal, and your power window should work like normal.

socket dislocated maybe , loose contact
unsrew the window button panel and reattached the socket maybe,
happen to my mvyi . i fix mysefl

dah booking ke

Yup, yesterday did

Alamak x pm me for best discount hehe skrg what rebate

pm u now

Thanks for the tips it works. . The button is working fine. Didn't know disconnect the cable could cause such problems.

Hi, i am from penang, butterworth, may i know which forumer here is from penang, will getting a bezza during raya, any dealer to recommend? How about DMM SALES?

I am from Penang. I recommend zam astina.

https://goo.gl/maps/JhDRfExA9V92 Perodua Taman Chai Leng
1262, Jalan Baru, Tmn Chai Leng, 13700 Butterworth, Pulau Pinang.

Has anyone got a Bezza with ths updated rear that makes it less tonggek ?

From the pictures, the updated rear means I don't really need to have a bodykit - The car now looks nice by default.

I suppose I'm asking is there a point in having a bodykit other than the fact that it looks cool ? I ask because I work in an industrial area and the roads I have to take to get there has lots of potholes and small pebbles. I'm afraid of wrecking the body kit.

This post has been edited by Tawneys Bimorph: Apr 28 2017, 11:03 PM

Actually im struggling to understand why the ground clearance is so high. Cannt they lowered it a bit?
The tonggek rear really ugly. I hope with new rear bumper can at least help to soften the tonggekness