Because electronic is more efficient when under colder temperature mah

like the superconductor principle?

superconductor works at -180c

zero resistant

i know the principle behind superconductors
but i was wondering does the decrease in temp actually follows the
superconductor performance level
meaning to say...resistance *generally* decrease with decrease of temperature?

Ultimate water cooling with mineral oil



What happened?

Guys I need some suggestions. I have budget about RM400 and want to get coolers for CPU and GPU, do u think any WC setup can do better than air cooling with this budget? Budget like this can get Sunbeam CCF and Accelero Twin Turbo already.

u need more to watercool both gpu and cpu.. Aircooling is good enough for u.. Get TR HR-03GT instead of accelero..

Greetings to everyone . Im kinda new into watercooling so i seek advice n suggestions from u guys. Currently im using xigmatek s1283 n oc'ed my proc to 3.8 with 1.35 vcore set, getting idle/load of 42/58. My hands r getting itchy n wanting to try wc just for the sake of trying. Im planning on getting the swiftech H2O-120 compact kit but afraid it wont be much diff from my current temps. Custom wc is tempting but my casing(cm690) is just too small to fit anymore hardwares as im running sli already. Since the compact kit is pump+block and reservoir+rad so space needed is much less plus i might add a double rad to enchance cooling since single rad in my opinion is not really efficient. Just wanna get some feed back from u guys n hope ull be able to give ur opinion on my plans. Btw has anyone personally used this kit?

-the block is prone to leaking due to the gasket used. check google and swiftech forums.

-the block vibrates like a dildo at overvolted specifications


here is an example how u can stuff in a setup and "the cm690 is small because i have sli/crossfire" is not true.



figure out a way to stuff it in. that is were the fun is

lol... fun ah bro?? how to fit a 3*120 into a cm690?? haha...

Oh i see. Ive read bout the vibrations from newegg from customer comments. Here a pic, guess ill have to crack my skull to figure outa place for rads.

I did mod my top panel to fit a 120x3 radgrillz for 3 fan. Pump, reservoir . . . . Maybe can refer to u for help, hehe.

http://forum.lowyat.net/index.php?act=Atta...=post&id=589574

This post has been edited by hermit23: Sep 19 2008, 07:17 PM

potong la, the top panel will fit a triple rad with a sacrifice of the top part USB ports, and with a little modding, and the rad shown in pic is a dual, not a triple

---

Added on September 20, 2008, 12:15 amu need the radiator to be upright as it has a built in radiator, note the little screw cap at the back, its a pain in the ass to fill though

This post has been edited by bryanyeo87: Sep 20 2008, 12:15 AM

i see... cut the top huh... u provide that sort of service bro??hehehe.... then it would a very tight fit for the casing... hahaha a triple rad in a cm690... woo hoo....haha

This post has been edited by glock88: Sep 21 2008, 10:46 AM

noobie in WC..hehe..
any comments,suggestion really appreciated.

here is my setup :



got a question here.
my nirox pump is making a loud sound when i turned it on.
it shuld perform silent rite?

is it becoz the pump motor is doin extra work pumping the water?
the sound is very loud.

hope can help me.
thanks!

--------------------------------------
found the solution.
just need to turn off on back the pump..hehe

thanks bryanyeo!

This post has been edited by _707027_: Sep 21 2008, 02:55 PM

nice setup but sure would deserve a much better pump though. The gravitational resistance is making that puny P2800 work pretty hard

Bro almostthere,any pump which is less costly then D5/DDC but more powerful then Nirox?Something cheap,won't mind ac power

This post has been edited by OC4/3: Sep 21 2008, 07:33 PM

guys... i know its the wrong section so sorry lar... my question... instead of using watercooling.... have any1 tried chilled air cooling??? using a custom made refrigeration system to cool the components inside a sealed case(aquarium)... haha wont this better than lots of things? lik LN, dice and cascade are not convenient to be used 24/7... but a properly setup refrigeration system would be trouble free.... all u have to worry is condensation.... which can be overcome by using lots and lots of silicate inside the cassse. what do u guys think...

you mean a TEC array in the pc?

Nirox P3800 modded should do the trick

The problem with chilled air is the issue of condensation which leads to insulation work which is messy, hard to reverse, and if anything kaputs...a whole crap of warranty claim issues. Someone tried that before but ended up having too much hassle he just sold it all away

@bro almosthere,Nirox P3800 i heard from bryan got some reliability issue
Nirox P2800 after mod,what is the Hmax?2.5M?