They are connected to both 11n and 11ac but maxed at 300Mbps.

Anyway I have solved it via a chat feature with Ubiquiti guy.
Now all good devices are showing max Mbps as they should

Hi forummer, There was a new product UNIFI Gigabeam ,
airMAX AC 60 GHz/5 GHz Radio with 1+ Gbps Throughput .

Was thinking to bridge the connection for UNIFI 800MBPS on both house under 500m distance. To maximized the bandwidth , this product are able to provide 2.16ghz support, do you guys think that this were sufficient for cheapest solution while getting full speed support?
While this were the only product that i found were around the budget and fulfill the speed, any other recommendations?

Hi forummer, There was a new product UNIFI Gigabeam ,
airMAX AC 60 GHz/5 GHz Radio with 1+ Gbps Throughput .

Was thinking to bridge the connection for UNIFI 800MBPS on both house under 500m distance. To maximized the bandwidth , this product are able to provide 2.16ghz support, do you guys think that this were sufficient for cheapest solution while getting full speed support?
While this were the only product that i found were around the budget and fulfill the speed, any other recommendations?

Hi

I have using the normal nanobeam ac gen2 the results was awesome , this one is new one should improve better throughput i was using 800 Mbps for my office p2p able to max 450 to 500 mbps via nanobeam ac gen 2 , might consider this one for future project

https://store.ui.com/collections/operator-a...tu/products/gbe

Not sure about the price but Mikrotik has a similar product. https://mikrotik.com/product/wireless_wire

Hi

I have using the normal nanobeam ac gen2 the results was awesome , this one is new one should improve better throughput i was using 800 Mbps for my office p2p able to max 450 to 500 mbps via nanobeam ac gen 2 , might consider this one for future project

https://store.ui.com/collections/operator-a...tu/products/gbe

Great, It's even cheaper than Gigabeam but there was missing the 5ghz backup channel.
Gigabeam cost 129$ Dollar per unit.
RBwAPG-60adkit(Wireless wire) cost 198$.
But the retail price when landing here are going much higher.  
Awesome, I think for this are able archives Local Gigabit speed. Could fully utilised the speed for 800mbps and local transfer. :thumbsup:

But i had another question, as i were using it as outdoor unit. Do i required a surge protector on both end ? I got no experiences on surge protection.

Yeah do add the surge if got money otherwise don't use protection it's like wearing condom or without lulz

I'm looking to replace my default TM Unifi router with Edge Router X.  Currently on the 500mb package.  Already have 2 units of UAP AP AC Lite for the Wifi.

Is this a good solution to make use of my bandwidth?

Also would like to use hypptv still.  Do you have suggestion for config/setup if hypptv is in different room and need to share network with playstation & tv in a setup like this?



Is this available here? USW Flex Mini

Thanks a bunch!

I just got my EdgeRouter-X on yesterday, setup and work like champ, with offload I can max out my 800/200 TM Unifi connection speed with either ipv4/v6, it replaced my MikroTik hAP ac2 due to I need ipv6 but MikroTik doesnt support ipv6 offload, I end up get about 350mbps max in ipv6.

No problem at all

Thanks!  Ordered the router already.

what switch would you recommend for the hypptv?

If u have an erx. U wont need a switch. Just use the erx to manage your hypptv.

actually at the hypptv I am thinking of connected the tV and PS4 via cable instead of Wifi at the moment.

What's the best way?  I think a switch that can do vlan right?

Just got myself my very 1st Ubiquiti product:

a) ER-X
b) UAP AC LR
c) Azure remote PC for Unifi controller

hopefully can fix my lagged/non responsive ac3150 from tplink. once in a while i need to restart it to monitor via apps/web. number of clients can be as much as 35-38

Oh wow. Nobody should need to restart their router anymore. I have a good feeling that problem will go away forever. Erx and ac lr is a very good choice. Bang for bucks in my opinion. Out of curiosity and not being familiar with azure, what makes u choose that for the controller?