They removed from Malaysia store due to trademark contested my TM

Dats y I ask previously why TM did not sue. But sombody say settle liao also why did ubiquti infringe TM tradrmark

Also "unifi" name belong to quite a number of other entity so I dont know who owns what.

you can.. change your country.. then you can download it

its me well because as i said, different country have different laws.
patenting and trademark can be registered for usage of local and global.
there are pros and cons local trademark reg and global..

cloud key gen 2 plus rack mount

Anyone can teach me how to bridge Maxis VoIP VLAN822 in edgerouter 6p?

Eth0 = WAN port
Eth1 = To internet clients (WAP, PC, etc)
Eth2 = To on-premise PBX .. this PBX need to see VLAN 822 tag to dial up the SIP account

Just buy a 5 port normal switch and split the incoming network from btu. One to your edge router and one to your voip. It works for me.

You can check my tutorial on how to bridge interface and vlans. Its under the unifi hypptv tutorial. Specifically under hypptv config. Pretty simple and i dont think u need to buy another device just to get voip working. Gd luck.

I'll give that a shot... but now another thing is how to tag a VLAN on the port? I have multiple VLAN 100,101,102,etc.. that has firewall policy

eth0 - PPPoE WAN
eth1 - connected to my switch networks <-- this port I want to tag multiple VLAN
eth2 - connected to my PBX for VoIP

EdgeRouter-6P doesn't have a switch chip, so cannot configure switch0 interface.

This post has been edited by HuorEarfalas: Nov 9 2019, 03:46 PM

U dont need switch chip to make it work. Just add vlan 822 under eth0, then add a bridge, etc: (br0). Then add eth2 and vlan 822 to (br0). As long as u dont specify vlan 822 under any firewall, it wont be affected as the other vlans.

This post has been edited by wanttotree: Nov 9 2019, 06:05 PM

I'm not talking about those ISP vlan.. i'm talking about my own.. i..e CCTV VLAN, VoIP VLAN, Native VLAN, Client Vlan,... etc.. etc... i have firewall rules applied to them

I understand. Your 822 is gonna be fine.

I'm planning to get an UAP-IW-AC. I just want to know, since it's passing about 48V through its port, will it fry any equipment if connected to the two Ethernet ports available?

Planning to connect a TV box/TV and a Sonos speaker.

nope.. it will not. its poe power up....

Thanks for clarifying!

hi, im setting up my unifi 100 for USG, unifi switches and Tm`s BTU

based on this diagram ,

i have a question . do u tag port from modem to unifi switch`s port to VLAN 500? say port 1. should i go to device>switch and tag port 1 to Vlan 500? what about the USG? do i have to tag port from USG to port say 2 ( unifi switch) to VLAN 500?


source info

This post has been edited by kucau: Nov 19 2019, 03:01 PM

Kindly quote:
1) AP HD
2) AP NanoHD
3) Ap AC Pro please.

Thank you

Anyone know dream machine?

its wireless router...

this is all in one wireless router , meanwhile i don't need to buy any thin AP and Cloud key to host the controller. and with the DPI and statistics that i need for network device info.

will MY distributor bring in this model?