irwan6179 i also flashed 380.59 and also have the internet led problem, anyway, izit possible to downgrade the version through the administration tab and upload 380.58 firmware file?

raynman
have u found a way to lower down the temp whn in room temperature? mine was placed at living room and the temperature also at around 80 C

bro, i dont need to pay you more right? me no money broke

I encourage you to try first
Then let us know the result
Since when does RMA require stocks?
When you send it to the shop for RMA, the shop will either send it back to the distributor or directly to the manufacturer for RMA process

I will just leave it be.

When I switched on the air-con, the CPU temperature drops to 72C, which is acceptable.

So far, a 82C temp did not adversely affect the router's performance or stability at all.

I can connect it to my chromecast v2 using 5GHz without any issue. I set 5GHz to channel 36.

This post has been edited by chikanosz: Jul 14 2016, 09:01 PM

Found something, not sure if they will help but at least it's worth a try

Maybe you could try entering the Emergency Upgrade Page by setting static IP to your PC first. Then flash the Stock CFE
If not, just try & flash to the stock russian firmware within the firmware upgrade page

And even if you bricked your router trying, you could just RMA it

Stock CFE:
https://mega.nz/#!cIYjDTaC

Stock Russian Firmware:
https://mega.nz/#!pB4z3KCY

PS:
1. Ignore the Russian language, what's important is to get official firmware back into the router
2. Try these at your own risk

This post has been edited by sHawTY: Jul 14 2016, 09:22 PM

I am late to the party.

Anyone has an extra unit to let go, planning to make a comparison with the actual RT-AC68U and RT-AC55UHP.

Buy from Lazada lor

Ok am online with the unit. Quite easy to setup, connected a 4 bay hdd to the unit and trying to look for the settings to share the drive. Noob at the settings.

Guys, I just bought two unit without doing any reading.

But it seems that, this router does not support AP mode
I've searched here and there but not sure



Other than this, it is all good.

Lazada sold out. Bought the last unit

Here is the AP mode setting in Xwrt-Vortex firmware.

can anyone pls share hows the QOS in Xwrt-Vortex? and does Xwrt-Vortex support more than 2 guest wireless?

Using xwrt-vortex, how much free RAM on bootup you guys got?

nvm got it connected

need to use wpa, wpa2 cant connect

anybody here got extra set let me know?

Yes. Each channel supports 3 guest wireless network

2.4GHz:
1 x main wireless network
3 x guest wireless network

5.0GHz
1 x main wireless network
3 x guest wireless network
80MB

bro, how about the bandwidth limiter in Xwrt-Vortex? can it set by different guest wifi with limit of 3mb/s download and upload?

Don't know. I don't do bandwidth limiter

Yeah, mine also flashed to Xwrt-Vortex.

Now I will need to find my UniFi password which I have no idea what is it, I supposed I will need it. Router is still not with me, tomorrow's night only my friend will pass to me.