Been waiting since few minutes.
Internet led keep blinking

Any idea how to turn of the light at the back of Huawei logo?

I press the logo but only manage to turn off the lights of LAN INTERNET WLAN & WPS only.

I flashed the r7000 one
Or should be a different one? Just noticed there's multiple version listed on xwrt site
Seems like menu always get stuck for this version

Crap, i just realized I flashed the wrong version
Anyway I can get back to firmware upload setting? Samw method as before?

So just need to go to CFE miniweb server by using the same method?

Can you still go cfe firmware page by pressing reset button 15-20 secs?
Gonna ask around at the 4pda page about my problem

Ok, so I managed to get back to ws880 firmware
I just went back to cfe mini server mode, and uploaded the (correct) firmware this time around.
Seemd like everything working nicely
LED display still there

Gonna try reset it again, still not detected by asus app though

Yeah, same method

Did you get your router detected even though it's flashed with n7000 firmware?
Or does the router have to be connected to internet first? My router still not connected to modem btw

Glad to know you're finally on the correct firmware :thumbsup:

By the way, where did you find the stealth mode in AsusWRT? I tried looking for it but couldn't find anything

anyone else getting the 2nd WAN ip? my real asus router doesn't have this 2nd WAN ip

[attachmentid=7112561]

That's TM's own gateway
Nothing to worry about
Found it. Thanks man
By the way, why aren't you using the Asus DDNS?
It'll enable you to access your router from anywhere

Except my office where the company's firewall blocks all DDNS

Here is the AP mode setting in Xwrt-Vortex firmware.

guys, any chance after flash the firmware,can be use as repeater?

*ya..i know its wireless router.

Is this ""boot the emergency upgrade page"? 

This?

Loaded the bin file.

Upload completed. System is going to reboot.
Please wait a few moments

The Internet LED on router is blinking, but there is no reboot.

p/s
I click continue. It showed me the CFE miniweb server.
Then I chose the the firmware and click upload.
Then the browser went offline.
Waited few minuted, it went online again and sent me to the CFE miniweb server again.
The "Internet" LED on router is still blinking intermittently.

How to tell the flashing is completed?

Guys, I need help.

I managed to reach the Emergent Upgrade Page and uploaded the modified WS880_trans.bin.

The next page shows Upload Completed but it didn't boot to the CFE miniweb server as per the guide, even after 60secs.

So I clicked on the Continue link on the Upload Completed page. However, it shows page cannot be displayed. Tried to access 192.168.1.1 on both chrome and IE but no result.

I repeat the 'power off-hold reset button-power on' process and I still can't access 192.168.1.1. The Internet light is still flashing on the router.

I don't know what to do now. Please help me

can i follow this

Guys,

Appreciate some help here. I managed to get this router at the very attractive price, thanks to you guys over here. I managed to successfully flash the router to ASUS-XWRT firmware, but somehow i couldn't get it to connect to unifi.

I'm very sure my unifi password is correct, as i just installed new unifi 30mpbs, and i've snapped a picture of the password given by the installer. When I plug into TM's default router, it will connect in less than 15 seconds or so. But when i plugged into WS880, it wont connect.

I've key in correct user ID and password for sure. After that when detecting connection type, it always say time off.
I can see the WLAN and WPS light on WS880, with WLAN blinking (indicating wireless user connected) and WPS light permanent on. I cannot see the INTERNET light. I've done a soft and hard reset, but still couldn't connect to unifi.

Any ideas? Could be the new firmware, somehow i miss the steps or the firmware is corrupted? Can i reflash it again using the same method?