What mod r u using ? Mech or regulated mod ?
If mech mod, how low do you build ?

Will only get it when I go next month.
Since I have Amazon Prime only takes 2 days for them to deliver with free shipping

BTW this one lagi cheap and can go heavier weight.

http://bit.ly/1qi6xXU

This 1 really cheap, but goes down to 1g...
We need at least 0.1g, I'm using 0.1g scale... not very accurate

To be more accurate, 0.01g scale is recommended

Depends on what volume are your mixing but for those just making some for themselves. 0.01 is definitely way better... Lazada has loads of cheap ones!

i bought the stainless steel weight for my DIY juice. A bit expensive around RM 40+/- but it is worth it.

Some thoughts which may be useful.

If you must mix by weight:

A digital scale is only as good as the quality of the load cell(s). Don't go too cheap.

All scales require calibration from time to time. Invest in a set of calibration weights. Most weighing machine shops can also calibrate your scale for a small fee. If you're buying from a physical shop, ask the seller to calibrate the scale for you as part of the deal. Watch the seller calibrate, if possible. When you see the scale measure small weights and maximum weight accurately, you'll have greater peace of mind.

Features like user-selectable auto-off and backlight on/off are handy to have.

I own several digital scales ranging from 100g max to 50kg max weight. None of them are used for mixing juices. Call me antiquated, but I prefer using graduated PMP cylinders. PMP is polymethylpenthene...I may have spelled it wrongly; the material is non-wetting and there is no meniscus created in them, easier to read accurately.

I have both glass cylinders and weight scale. I find weight scale is much easier and more convenience to use.

DIY e-juice is all about trial and error. I have learned my lesson, some may gunk your coil, break your cotton and muted taste in less than 1 ml. Sigh... so much thing to learn

sorry guys i know this had been asked before.
where can find best deal of RX200+3 battery promotion?
im asking this bcuz scare of bought fake battery
so where you guys know is 100% legit 1?

Going back to basics.
Had a slight confusion. So just want to confirm my understanding of coiling.

If i had 8 wraps (inclusive of the legs out) does that count as 8 wraps or 6(since 2 outer) or 7? Because from reading online if i am not mistaken, it could be 8(full wraps) or 8/7(half wraps).

I just need confirmation. Maybe will upload an image later on.

Battery LG HG2, get from alexng (shopee) http://mall.shopee.com.my/item/?sid=682732&iid=1488296

confirm original, or you weight it yourself. Each battery must weight more than 44gm.


RX200 search shopee and lelong.

http://mall.shopee.com.my/item/?sid=1014011&iid=5679807

ok thanks...damn all white colour no stock,i really like the white green 1

http://www.tokivapes.com/product/solotech-...ry-3000mah-40a/

40amp...legit or fake?

I saw my friend using this battery on his sx mini & dna mod.....he says very good.....better than the coklat battery. AED70 is how much?
I m also looking for high amp discharge battery for my Cuboid.....using coklat battery now. When 100% very good but when it reach 50% my mod shows battery weak....mean it drop to 2.9v and the wattage on my mod also drop.

This post has been edited by mulut99: Apr 11 2016, 07:28 PM

Meaning that the amp is incorrect or the battery is of low quality or clone. Most clone after using charging for 20 times, cannot fire even though the life indicator above 40%. All clone batteries have "tipu" spec.

Or..

Battery is near end of life cycle.

This post has been edited by amco: Apr 11 2016, 08:09 PM

seems like fake battery,mine lg yellow,can drain till kosong no problem in ipv d2 40Watt

I got 7pcs of this coklat battery....use for a few months on my Cube ll and Kangertech no issue and drain till finish also. And 2pcs is brand new bought together with this Cuboid at vape shop. Only on this Cuboid. Tested all this batteries on Cubiod....same. Maybe this Cuboid need a high drain amp battery

This post has been edited by mulut99: Apr 11 2016, 08:57 PM

got try different mod?
or maybe its jz cuboid feature

Tested all the batteries on this Cuboid mod....same. Tested this battery on my Cube ll and Kangertech....good. Maybe u are right....maybe is the Cuboid safety feature. It show battery weak but still can fire.
Anyone using Cuboid 150w here? Got this issue on the coklat battery. 100% battery no problem. Only <50% battery it show "battery weak" when firing on 35w and above or firing above 10A. If <50% battery....fire at 23w on a single coil tank no problem.

This post has been edited by mulut99: Apr 11 2016, 09:02 PM

did you feel its weaker when the warning shown?
wanna buy cuboid,heard perform really really great but i just dont like the looks of it
im going for rx200 instead