When the battery weak message appear....the wattage will go down accordingly. Maybe is a safety feature which this mod wont stress the battery when the battery got not enough ampere. This Cuboid already upgraded to the lastest firmware v3.11.
RX200 a bit bulky and it use 3pcs battery , that's why i choose Cuboid. Smaller and nice hand grip. Performence better than my Cube ll. More throat hit on it.

This post has been edited by mulut99: Apr 11 2016, 09:10 PM

Are your batteries married? Maybe you have 1 which is weak.

LG HG2's are rated for 20A continuous output.

Joyetech website says: "We kindly recommend high-rate 18650 cells with rated discharge current≥25A."

If you have any genuine Sony VTC 4's, try using them in the Cuboid and see if it makes a difference.

that feel kinda suck,wonder what wattage you're vaping and what ohm?
i might get another cuboid next month or so,cuz like you said rx200 is really bulky cant even fit inside pocket.
rx200 home use,cuboid outdoor

How to know the batteries is married?
I bought all this battery in a pair. Charge them in a pair also.
1st pair when buying Cube ll
2nd pair buy it as a rotating battery for my Cube ll
3rd pair buy it when i bought this Cuboid mod.

I dont have Sony VTC 4 battery to test it . All of my batteries is LG coklat battery. Maybe this battery not enough juice for my Cuboid. Will get a higher discharge amp battery later and will post the result here later. As what u say this coklat battery is rated 20A and this Cuboid need a 25A or higher battery.

This post has been edited by mulut99: Apr 11 2016, 09:25 PM

Guys. My derringerclone just died on me. Can suggest me a new dripper. My setup is single coil 0.7 ohm 7 wrap 26g khantal on 2.4mm screwdriver fire ard 20watt.

If your batteries for 1 mod are kept together, used together and charged together, then they are considered married batteries. You're doing things properly

You may find this to be a good read: http://guidetovaping.com/2016/01/10/how-im...ried-batteries/

As you may have read before in previous versions of this thread, I've expressed deep interest and liking for the Cuboid...and I really want one. But I only have 2 remaining VTC4's...all the others died from old age liau, and the rest of my batts are LG HG2's and a few joenida shiny wrap "HG2". I guess it's time to go hunting for genuine Sony batts b4 I get that mod.

Maybe other Cuboid owners can shed some light or give input into this battery matter.

Yup, i charge them in a pair. I also marked those paired battery in case of mix up. I think time to get a better battery for my Cuboid.

I own a Cuboid & a RX200. As from my prev post, i prefer my Cuboid over RX200 as my daily driver. In fact, mu rx200 was used less than 5 charge cycle since bought. Other than being a little bulky, tis rx200 wasn't playing nice to few of my attys sometimes. My Cuboid on d other hand performs very2 well without issue ever since i bought it. My current setup are mostly either s/steel 28g @ 0.5Ω or Kanthal claptons 28+32 @ 0.37. Got an average 250puffs or 1100sec from a pair of fully charged batts. Have married 2pairs - 2x25R & 2xHE4. Both firing w/o problem wit stat as stated.
I only have a pair of vtc4 and these r for my mech mods. Did try using on my cuboid but i dont really see any significant diff in performance compared to those 25rR's or HE4's.
If given a choice, i would get genuine vtc4's over 25R than HE4. However, genuine vtc4 is hard to get. So my next preference r samsung 25R which is easier to chk if u unwrap its skin at bottom and look for d infinity symbol. Then i rewrap.
To chk batts authenticity, 1st i would weight them and compare to spec sheet. If diff less than 1.5g from stated max weight than most likely those batts are genuine. Also look for specific tell tale signs... Eg the +ve terminal pins and other spec markings.

Cuboid max 200watts @ 0.37Ω.
So far my cuboid have no prob firing @ 0.08Ω build at 95watts using 25R or HE4. Note that these are confirmed genuine batt.

guys, 1ml of water = 1 gram
how about vg pg? same?
cuz planing to use weight scale to brew now,hehe

how long does your rx200 battery last? also i assume u bought long time ago,they released few of firmware update,did that fix your issues?

hmmm...all the sudden,lot of online vape shop reduce their juice price?
from rm30+ to about 20+ now...what happen ya? hhehe

Why this thread is still exist?

any problem bro?

Hardly see any vapers nowadays after the issue with nicotine.

nicotine issue?

the act on nicotine as controlled substance which bar those sellers that were selling the flavors than contain nicotine?

I'm using my Cuboid with Griffin & Solotech 3000mah 40A batt. Firing at 45w 0.22 dual SS coil. The battery last all day on this Cuboid.
I feel Cuboid firing is damn good. Can drain the battery until finish.

VS rDANA 40W. Any recomendation?

Where r u located at? Willing to offer my help to let you test using my Sony vtc4's

I'm using choco LG battery too on my cuboid When down to 50% it will feel significantly power dropped but is not that an issue for me still firing well. Dual coils twisted 0.4ohm firing at 40w all day long. normally charge full from morning use until after work back home I still have like 60-70%. not that I puff alot during work time though but night time Yes and it dropped fast but can last until my battery died though.


My Tsunami clone has arrived from FT, Tried on twisted 28g kanthal 0.4ohm 6 wraps each firing at 40w. Drop down a list of thing I found maybe something went wrong with this clone compare to original
The RDA
1. Cap encloser ( I can't close completely locked with it, is the original one has a knob or a click something like velocity to lock the cap?)
2. Cotton at side too limited space, I have to stuff in the cotton to suck the juice up and juice well is not holding juice enough. 5 drops the well like almost filled up and almost can flood the air hole.

Who is using the original one can verify is it the same problem you having or is my wicking problem. Might need to try another round of wire tonight. I can't get a mouthful of flavors and clouds from this RDA yet.

This post has been edited by snake1983: Apr 12 2016, 03:21 PM