hmm......if loosen the timing, i think it will get higher.

check this out
http://www.planetamd64.com/lofiversion/index.php/t22139.html

the average oc result for Infineon CE-5\6
2.0-3-2-7-1T - 200-220Mhz
2.5-3-2-7-1T - 240-260Mhz
3.0-3-2-7-1T - 260-265Mhz
3.0-3-2-8-1T - 265-300Mhz

seem that loosen the timing may help to boost the speed.

if can get 250fsb 1:1

This post has been edited by kabukiawie: Jan 5 2007, 05:27 PM

yeah... no lag at all.. haha..

most probably my processor hit the wall already. 1.6v is the max i can go with my mobo. Vdimm is at 2.7v.

Thanks for the info.


----------------------------------------------------------------------------------
After 2 hours of trial and error, this is the best i can get



vdimm=2.7v
timing= 2-3-3-5

Super PI=38.391 sec

This post has been edited by irangan: Jan 5 2007, 05:41 PM

haha...yeah..so sad...i got no time recently for pc..even my C2D oso dun have the extreme mood to oc like last time my P4 478


how i define cheap? im not using it anymore..tat's y selling cheap
n how much do u thk this board gonna be? rm150 do u thk its cheap enuf for tis good board?

yeah my volts are fluctuating like mad i raised my vcore from the stock of 1.525v to 1.55v already..and its changing from 1.568-1.616v damn my lousy psu

erm btw is it normal for the mhz to fluctuate also?cuz i've set my fsb to 150 which should be 2700mhz but when i open cpuz its like sometimes 2760mhz sometimes 2700mhz

i will inform my friend about this... RM150 is cheap

your vcore flatuate is due to your PSU. get a better one la. Acbel is cheap and nice

yes, cpu speed do flatuate but not so serious like yours. your mhz faltuate that much is directly due to your PSU and that is not good for your comp

Wao, that is sweet. i notice your performance mode is disabled, have you try to enable it?? It may boost a bit.


150?? its cheap.


This post has been edited by kabukiawie: Jan 5 2007, 08:09 PM

siauann you MAX 3 only selling for RM150 ? That's preety cheap . irangan, seeing your RAM running with 2.0 latency,the performance is improved man.

yeah i actually already have a enermax fma purepower psu..just that it's in the process of RMA now now no choice have to use this capalang powerlogic psu

so in short if the volts or cpu speed fluctuates too much it'll damage the proc/mobo?

is the OC result for AMD system?
i think intel system can't achive that!

ASUS board tend to overvolt a bit during idle. Its normal throughtout my experience. However for my Abit board, terbalik, voltage goes down like hell >.>"
As for your Mhz a bit higher than expected, it is due to the spread spectrum. Normally it is recommended to disable it if OC but if its stable then let it be.


2 factors causes flunctuations, PSU itself and the motherboard. As for my case, its the mobo, if I get even a 500W also the same thing unless I do a droop mode which I dunno how to do >.>"


You won't know unless you try
Even some TCCD got 300Mhz FSB 1:1 on Intel systems but sadly its quite picky

But mostly all rams works well with AMD, I dunno why

oh okay..yeah i remembered last time i disabled my spread spectrum on my msi board..forgotten what it does edi so should i disable it now?wont affect much right

hehe..cheap sales...mega sales...
i need to test the board 1st

Won't effect much

like what you said, asus mobo really overvolt when idle. when load, it drop back. hmm......

enable and disable spread spectrum not much different to me. i disabled it already.

even though the result is for amd, i think the outcome is almost the same. loosen the timing seems help to push higher, maybe irangan's ce-5 can go 250 at c2.5. now have good ram in hand, it better that find the max fsb 1st instead of tighten the timing. after reach there, tighten the timing to squeeze more. just my 2 cents.

the thing is whether irangan's CPU can go or not only. HIs Vcore max at 1.6v which is a limitation. Vdimm no problems already at 2.7V

yeah..wonder how fast it is...250mhz 2-2-2-5
post some super PI result lar...

seems his cpu like stuck at 3.9GHz, if can push till 4GHz++ sure rocks. At 250fsb 1:1 sure can get 36s or less in super PI 1m. cant wait for his result.


@nelza-ax
last time hows the temp for idle and load on HFS last time?? i afraid the cpu fried if push to high. planning to add more vcore. hehe.....

pm me if you wan to sell it

erm..dun remember ar..but not much different when using hsf and WC..
i'm still 0n ma holiday,neway i'll find the screenie later..

How to post? Sold off already

haha.....you aiming his gem....

wait your screenie......