aiyark..forgot edy..need to go back to my hometown for 2 weeks during my holiday..
no internet connection there.. goin to cc is sux!!.. but i'll update dis thread slowly..
sorry for that..


keep on rockin soc 478 user!!

Actually I used to use BH-5s, now no more, sold it off already
Looking for D43s now~~

Edit : My twinmos is not BH-5 chips, normal Value RAMs (using 5:4 ratio) and my GFX has been changed to Nvidia FX 5900XT (forgot to update)

So fast comes to V3 already. shinjite,last time you use BH5 how far can you your RAM goes?

hoho, V3 already. s478 still rock!!

250Mhz 2-2-2-5 at 3.3V

You gto tried to go higher or not?You were using DDR booster on your motherboard?

Wow, already V3?
S478 still goin strong as ever, bravo.

didn't go higher because need a lot of Vdimm, around 3.6V to reach 265Mhz FSB

good work nezla oh yeah my specs aint updated..mind to change my GC to 6800GS and the speed to 2.7ghz?thanx

yup, mine need to update as well, no more 9800 pro, now using geForce 3 Ti 200

i will try to push till highest using 4:5 divider and test superPI it. hehe, hope can get better result.

you proc still can go higher, use 1:1 instead
Prescott can scale over 200Mhz FSB

i know, but not stable at 170fsb++, highest can go to 180++. Too bad, the steping not good at oc. If get same steping like nelza's D1 steping, at least can pump till 3.5GHz at stock.

i try 188fsb just now, heres the screenchots




at last, 40sec.



This post has been edited by kabukiawie: Jan 4 2007, 12:52 AM

my rig



Pentium 4 2.8E@ 3.4GHz
Thermalright Ultra-120 paired with Thermaltake 120mm fan @ 2400rpm
ABIT IC7
2x Kingston d43 DDR400 @ 2.5 3 3 6
HIS ATI Radeon 9600XT
Powerlogic Atrix 500T

full load temp 69�c

cant get 39s in superpi using vista



This post has been edited by PeowYong: Jan 4 2007, 02:21 AM

I wonder why your Vcore is so high reported from CPUZ
Inaccurate reporting?

lol
didnt notice that...
i think inaccurate reporting
its around 1.50 in xp

a bit weird that the vcore is high if that is default vcore. my vcore report higher i put default. i set 1.425v, it come out 1.488v.

probably your PSU cant maintain the proper voltage. sometime if u using normal PSU, the voltage will flatuate abit.

PeowYong, i think your cpu temp is abit too high for Ultra120. it is better for you to check the heatsink contact with your processor. with ultra 120 shouldnt reach 69'c

That's normal, if you want to set it at 1.425V, you have to set it lower than what you've set in the bios, do it times & times again until the cpuz reports that the Vcore is true 1.425V [wait for 5minutes for the Vcore to be stable]

This doesn't happen to me while i'm using my Pentium 4 3.0E [Clocked at 4GHz] running on ASUS P4C800 E Deluxe

The best motherboard i've ever had for an Intel Pentium 4 Socket 478 processors

how to remove the thermal compound on the lubang..?

Can I be added to the list,I have a p4 1.8 willamette here