It's common issue faced by coated car. Suggested method is to have a top coat (which is a soft coat) to serve as "sacrificial layer". And it usually has strong water repellency/water sheeting ability.
May I know what kind of coating you are using right now? From what I know, some are really easy to get watermarks.

price has already dropped

DAS6PRO - RM680 (Osren)
Fake Rupes = RM850 (osren)

Guys need help here, recently me car kena hit by small stone on highway

Any remedy for this??

Touch-up paint.

how is the fake rupes? better than das6pro in terms of vibration and noise?

Oh so they are selling DAS6PRO instead of DAS6?

https://www.youtube.com/watch?v=aUqsomQLKZY
You can watch this video. Henry is using the Fake Rupes with 15mm throw! Looks great!


This post has been edited by windskill: Oct 26 2016, 11:34 AM

fake rupes orbits 15mm. the das6pro is 8mm.

chemical guys also selling fake rupes

its the ultramate... painted in black with osren's logo

Any recommendations? brand? thanks!

http://www.ezytouchup.com/store/?gclid=Cj0...FIGkaAmFR8P8HAQ


https://www.youtube.com/watch?v=Lnp3JizrSdE

This post has been edited by kennethchang: Oct 27 2016, 07:29 AM

Guys would you recommend the Meguiars Gold Class Shampoo or the Ultimate Wash and Wax? Why? Thank you.

a lot of ppl prefer gold class btween the two due to better cleaning ability

UWW is a lil bit lacking in that area

some more GC is cheaper

This post has been edited by N33d: Oct 27 2016, 06:12 PM

GC more expensive. Err are we talking bout the same GC? Paiseh new in this car wash thingy...

But does GC has the Wax ability?

GC is more expensive is because its in a bigger bottle.
Wash n Wax is gentler thus lesser cleaning ability.
This is a good choice if you're on a weekly top up wash plus quickwax.

GC doesnt have any waxing ability. It cleans better for a better prep for compound/polishing.

Detailing, its all about the prep before doing anything else.

This post has been edited by linkin182: Oct 28 2016, 02:47 PM

I just wanna wash only, not planning to do anything else. Do you recommend GC then? Thanks.

guys, sorry to ask about it. Is it worth to spend 1.6k to do body coating (5 yrs warranty) vs DIY polish & wax!?

Hi,

I just gotten my car 1 week ago. It is time for me to wash and wax for the first time.

My intended routine is:

1st step: Wash with Meg Gold Class car wash.
2nd step: Dry with microfiber.
3rd step: Clay with Meg Quik Detailer as lubricant using PG clay.
4th step: Wax with Meg Ultimate Paste Wax.

So my questions are:

1. When washing, is microfiber wash mitts acceptable? It is a lot cheaper them lambwool mitts.
2. Is spray wax or quik detailer necessary when drying the car? Or is it recommended?
3. When buffing off the wax, what type of microfiber cloth should I use? Comparing the cloths made by PG, the washing microfiber has a rougher texture, while the polishing microfiber has a finer texture.
4. What wax would you guys recommend?

I'll say go for Wash n Wax if you're just planning on washing only.

1. Yes... I'm using that as well. Would say more important is the pre-rinse to get the sand n debris off and the wash technique.
2. Necessary, no. Recommended yes.
3. Use soft plush mf cloths.
4. Depends on your budget and brand preference. Many out there. I'm using the ultimate paste wax. No complaints.