what do you mean over drive?
i control 6 fans by only using one fan splitter, 2x 1.3A, 4x 0.75A, total 60W if the fan spin at fullblast

How many xtraflo fans in ur case? the noise still acceptable?

Only 2 xtraflo . Yes for sure . Actually I believe it is just same with blade master in term of noise unless at full speed .

i just tested artic f12, xigmatek xlf 120mm, and my old vizo starlet 120mm

side by side, use hand to feel

i feel the vizo starlet airflow is much higher than the f12 n xigmatek
if (i can much stronger wind blowing at my hand)
if vizo is 100%, den f12 is around 70% while the xigmatek is 30%

i dunno about the static pressure thing, but i m totally shocked with this result

Which Enermax fan you guys think is da best?

http://www.enermax.com/home.php?fn=eng/product_a&lv0=4

Vega duo or Trio?
never tried enermax fan though

---

Added on May 21, 2011, 2:33 amdepend on RPM? higher rpm = higher airflow and static pressure + noise,
of course also depend on the fan blades design, thickness, dimension too.

This post has been edited by 1024kbps: May 21 2011, 02:33 AM

wow u bringing in enermax? Cool, read a few good review on thdm.

Just wanna bring in more choices. But still not sure which model to bring in. Vegas is more good-looking wise. Performance model? So need you guys feedback

I much prefer these Enermax fans.

TB silence fans (you could bring in all versions of these, it isn't too flashy and might appeal to broad range of buyers)

UCTB140
UCTB12A
UCTB12N-BL
UCTB12N-R

Review

or for those who want some really flashy ones, bring in the Vegas. that one really nice.

just to add. you could bring in 140mm dust filter as well. it really hard to get it here.

Thanks for feedback. How about those Twister fan series (Cluster, Everest, Magma)?

Dust filter plain black or UV one is good selling?

please bring the enermax twister series back,

love the detachable blade design for easy cleaning

I can say you have good hands which are able to scientifically test fans just by using bare hands without tools The CIA or FBI should hire people like you which have such fabulous skills. The other thing you forget is about the noise level. Obviously there are fans which have higher airflow than the F12 but this also means the fan is producing more noise and probably higher vibration too. The law of physics apply, there's no such thing as a silent fan with high static pressure and superb 100cfm airflow. If airflow is what you want then please buy a Delta 180cfm-200cfm fan. When you compare fans and when people say performance, it means:

1. Noise Level
2. Airflow
3. Static Pressure

Did you take into account all these factors before feeling "shocked"? A proper reviewer comparing fans would also use proper tools to justify their claims scientifically.

Well, I used my bare hand to test the air flow of the three since Sri comp got the display unit although I dun think they still sell it. I would say magma pulls air much better than the other 2.

Here's some review about twister fans
Review

for filter plain black should be ok. It will suit most cases.
something like this should be nice NZXT washable filter 140mm or the usual metal mesh one.

I think all enermax fans have this detachable blade design iinm.



This post has been edited by Oyaji: May 22 2011, 03:35 AM

i m shocked becoz both the vizo n f12 are rated at around 60cfm
u no need a good hand to feel it, the difference is just too much, u can feel it with any part of ur body

i stated tat i only compared airflow, no static pressure (dunno how to measure)

i m comparing both same air flow (~60cfm) fan (not 100+cfm), while realizing the vizo is much more stronger than the f12

by then i also doubt that how well the f12 static pressure can help in improving air flow, since the air flow already lose quite a bit

anyway, just some PERSONAL opinion from a me

No ideas about Vizo at 60cfm but their website says this:
http://www.vizo.com.tw/front/product/get_product_detail/79/3

On the other hand, it's using a different bearing altogether.

I would prefer Apollish Vegas or Apollish Fan and T.B.APOLLISH as well . Great looking with awesome LED + quite high cfm . but can estimate how much will it cost after shipping to Malaysia ?

Well, still waiting distributor to finalize my costing b4 I can reveal the selling price

But the price will be quite competitive compare to other fan like Xigmatek or Aerocool

http://lps2u.com/newshop/products/VIZO-Sta...-or-Orange.html

i checked others website mostly stated 62.7cfm

nice ar~ have been looking for a low rpm fan to replace my exhaust >>

hands down the F12 is one of the best static pressure fan there is out there.. airflow isnt strong.. 57CFM.. but pushes it thru thick stuffs easily.. and only price around RM30.. very cheap