I could be the unlucky one. I don't know.

Hey vapist brotherhood, I'm new to vape.

Looking for a basic vape stick, I like the ones can charge battery by plugging in direct power line.
Also shud have long battery life and good temperature regulation(cool).

Any suggestions?

Hey vapist brotherhood, I'm new to vape.

Looking for a basic vape stick, I like the ones can charge battery by plugging in direct power line.
Also shud have long battery life and good temperature regulation(cool).

Any suggestions?

You can buy Samsung 25R Green locally quite cheaply. Around RM 20 - 25. VE has them.

From your Velocity pics I see your coil is lower than the air slot. Try raising your coil. Getting airflow from below and the side of the coil might improve flavor.

Theres nothing wrong with Alstmo. The owner, Eugene Teo is a nice guy. He didn't manufacture the product. He just sells it. If you have any problems with your purchase, just contact him. He'll fix it.
Altsmo sent me a wrong product once. I contacted Eugene. He apologized, told me to keep it and resent me the correct one.

Who going to vape fest tomorrow in Shah Alam?

Lets meet up!

thanks for the tips, will try raising it...im not sure which one to buy

Crazy liao. My kayfun stuck with the p3 510 connector. Use coin and vape band also can't ~_~


Attached thumbnail(s)

try put it in freeze or ice

I did >_< don't know why suddenly so tight. Just got my p3 yesterday. Frustrating case.

This one: https://vapeempire.ecwid.com/#!/Samsung...tegory=13598622

I don't know what mod you're using or your vaping watts range. 20amp batts is a safe bet. The 20amp batts thats common here is the LG HE2, LG HE4 & Samsung 25R. Bear in mind the LG HE2 & HE4 and Samsung 25R R2(blue) were first released in 2013.
The Samsung 25R R5(green) is the latest. I bought 2 from VE and its good. The other batt you can use is the new LG HG2 (3000mah). Alexng on Shopee sells them for RM24. I bought a few from him.

The flavor RDAs like Magma, Freakshow etc has airflow from under the coil. For my RDAs with side airslots, I usually raise the coil to get a little airflow from under the coil. You can try it to see if it increases the flavor.

Put in hot water for min, then find some other rubber, not vape band, lilit and pusing

This post has been edited by donatelo: Oct 16 2015, 03:23 PM

Try ketuk2 manja kat lantai jubin

Hello sifu2.Need some advice.

Currently using Sigelei TC 150w with Uwell Crown Tank.Vaping at 40-50w on 0.25ohm OCC.Using LG H2 battery.

Does my battery go well with that set up?Gonna look for new battery since mati kutu when that battery finish and waiting for it to charge. Just wanna know from sifu here if got better battery option out there or just stick with the current battery. I do sometimes vape on higher watt sometimes like 70-80watt.

Want to survey early for portable(small) setup mod+tank. What combo that is hassle free?

Also looking where to find RBA&OCC for Uwell Crown around JB or online.

protype label done. whaddaya guys think?

just did a laser print on a silver foil sticker paper, and laser toner seems to find it hard to stick on the foil. any tips?

would like to try

Takdo 12mg ke abe?

Depends........ You can do an 'aged serious corporate' look and price it higher like Bells Brew. Or you can make it colorful and get lumped with other cheapo local juices. Lol!
But as it is, it doesn't quite stand out. Don't wanna hurt your feelings.

ado ado. ni prototype label jah. saja nak test print laser printer tengok ok ke dop. ink dia macam tak stick sangat la. eh dia stick but easily removable kalau scratch.

There's one tomorrow? didnt hear anything about it...and i live in shah alam