yeah, if you did portforward
just uncheck enable UPnP

I enable DHT. But no green tick.
It's yellow exclamination mark.

edited: what portforward? I didn't set anything yet.

This post has been edited by Kelv: Dec 23 2006, 05:54 PM

yea..just turn off the uPnP function after you port forwared, both cannot work at the same time, might crash your router[in some case]

there's no more development for uTorrent ??? The latest only ver 1.6.x beta [x, I forgot the value ]..after they been bought by BitTorrent??

I double click on the exclamination mark lead me to utorrent speed guide. What should I set there? Connection type? Current Port?
I'm using 512.

when u did portfowarding....u will auto have the green sign in just a few mins!!

www.portfoward.com





my prob:
so dat means need to "UNCHECK" the enable UPNP??

not bridge mode..means eh router mode ar? im noob in this things

im using linksys am300..got upnp setting..disable it as well?

portforward = open a port for some application / direct connect
Click Here to do portforward
choose your router, application n forward!


hmm..maybe

also who's using dlink
just set to DMZ mode
it's easy
no need to do that n this

Trouble. I dont know anything about router config.
I'm using the Huawei modem by tmnet.

connect with routing mode......
you can enable or disable the upnp setting also
and i dunno what will affect to your speed...
i juz know bridging mode didnt need to do port forward and upnp port mapping coz didnt need to

when i use my BitComet v0.80, after i port forward my listening port then i try enable UPnP port mapping
after enable it, i check back the NAT rule where i did the portforward, the settings have change!!
that mean it can be work!!

i think as long as the modem support upnp, then it should be no problem

i think it juz depend on the modem model only

It's bad enough that TMNut is throttling BTs. A few days ago, i started having problems with utorrent. Sometimes, all the trackers go into timed-out status. I'd have to restart utorrent and it'll be fine. Also, i cannot connect to seeders (i can connect to peers fine) even though it's an active torrent with 6K over seeders. Anyone knows how to fix this?

it is normal in everyone of us now
not only your µtorrent, even BitComet also same
and Tuotu will be worst when trying to connect to tracker

the answer is aledi tell by yourself
it is tmnuts problem
how to solve it??
go to Broadband User-2-User subboard and find a thread that name "How to bypass throttle"
but the way they said need money...

been experiencing the same thing also.

Now switch to obfuscated edonkey all-time. Basically useless putting on torrent anymore.

Any solution?

does TMNet know how to counter the protocol encryption already?

I DUN think so....

deng
didnt need to promote that software anymore la
limited range of file download

and for the jacklsw86, of coz the answer is "Yes"
else we can bypass the throttle by select "Always" in Protocol Encryption option only...
they use Deep Packet Inspection that can check through all the 7 layer of the packet...
including RC4 encryption...

I don't think utorrent is the best one.

'cause torrenting will only faster when there are local seeds and peers.

thats why some people say µtorrent is the best
but some say BitComet

more people say µtorrent is the best becoz there is more Malaysian using it
since that it is lightweight application...

yeah, you're rite, what ever client we use, will only useful when there are local seeds and peers

Last time in peerlist, I saw a utorrent, a fake one, called Fake Utorrent... malaysian IP

download speed reach almost 100kB/s... how they can do that?

This post has been edited by amazinggrace: Dec 27 2006, 09:42 PM