Presently no, at least until tuya add thread/matter support (probably another year or so)

For the 20a
Use any aqara switch + contactor -> ac/water heater

Like Max does

FP2 seems interesting. Saw lots of reddit threads on this. Pity its wired to a wall socket. I’m considering to get a mmwave sensor much like the FP1 and FP2, but from tuya, cos i saw one thats ceiling mountable, would look much neater, like a downlight. Not sure on the performance of it though. Pretty affordable at around RM160-ish without shipping.

Pardon me ya.. do you guys have a wiring diagram and also a photo of the contactor that you (and Max) mentioned? Im curious to see how it works and looks like. Thanks

Should be similar to how this guy installed the contactor for his smart switch, just that you hide in the ceiling or somewhere else

https://lesterchan.net/blog/2016/07/14/usin...e-water-heater/

Using the no neutral hack posted earlier, i'm able to tap into existing live/neutral cable for the light bulbs to power those devices that require cable.
This way, I can hide those devices in the ceiling.
Still doubtful to use mmwave sensors in rooms with fans though, unless you cover it with some aluminium foil

Just wondering ,

Are Aqara H1 Switch No Neutral can work well with Fan ?

My current switch have 3 rocker, 2 are for light and 1 for fan

Just wondering ,

Are Aqara H1 Switch No Neutral can work well with Fan ?

My current switch have 3 rocker, 2 are for light and 1 for fan

Hi guys. Any idea how to link the cassette aircond into Home Assistant and HomeKit? My cassette aircond is Acson brand, and non Wi-Fi version. If use those IR control, it will send signal to turn on and off aircond, but can’t know the status.

Connect esp ir remote to the ir receiver of your ac.
Flash tasmota-ir firmware on it, install tasmota-irhvac hacs on ha
The status gets updated even when the physical remote is used instead

I tried esphome, but it didn’t detect my mitsubishi ac so i switched to tasmota

Wow this is so complicated 😂

So this rgb wall switch is quite interesting
Something xzibit would be proud
“Yo dawg we heard you like rgbs and smart switch so we put rgbs IN your switch”

I can see my son having fun with this
Even got haptic feedback & speaker also

Gonna wait to see how devs gonna configure it for custom firmware

You already bought this switch?Where you bought it?

Quick question.. I’m planning to not buy the Zigbee smart wall embedded sockets for fear that my box may be too congested or any fitment issues. Therefore looking at getting those zigbee smart wall plugs instead.

Question: Are all Tuya branded zigbee wall plugs zigbee extenders? I.e. they extend the mesh network of the zigbee network?

If it's powered (not battery) then it's zigbee repeaters (bulbs, plugs etc)

So basically if it has live & neutral right ?

Cos my non neutral light switches aren't repeaters

Ok I'll snag a couple of them to improve the mesh network to my further switches which keep dropping off