http://xbitlabs.com/articles/mainboards/di...rce-p965_4.html

latest review Tforece 965 got 2.6 vdim ?

---

Added on April 4, 2007, 11:13 amhttp://xbitlabs.com/articles/mainboards/display/biostar-tforce-p965_4.html

latest review Tforece 965 got 2.6 vdim ?

This post has been edited by taxidoor: Apr 4 2007, 11:13 AM

Got rev. 2 meh? I would like to change to rev.2 by take it to "RMA"...
965Pt still in market, still got ppl demands it.

---

Added on April 4, 2007, 11:18 amI believe it is just the typing error, it didn't show out any screen prove that it got 2.6 vdimm....

This post has been edited by RokXIII: Apr 4 2007, 11:18 AM

but the review kinda new 27-03-2007 Tfore 965 i think in the market a yeard right ?

But i nvr heard that 965PT got release rev.2, not even on the Biostar official website, so i still believe that it is a typing error.
Thr got no way to increase the vdimm more than 2.2v unless u mod it....

965PT support Quad Core la bro..
Most 965 chipset support QC one, just need to update the BIOS.

Ya ka???......I got one with me.....since i bought it i never used lagi...i just kept it in my tiny store with the rest of my pc part. But i do read the manual came along with the mobo & it stated there only support C2D maa... & if it does support quad core, where can i download the bios? at their official website?

Yes, the latest BIOS from official website is good enuf.
965 chipset can fully support quard core. Dont worry.

wahhh.....nice...thanks bro

new 965PT user here. anyone noticed that there's something weird with this board's RAM timings? when i set FSB:RAM to 1:2 or 3:5, CL4, cpuz reports it as CL3. but when i set it to 1:1 CL4, it becomes the normal CL4. is it bios problem or something else?

now oficial biostar.com.tw

got 3 version of Tforce 965

Tforce 965 Deluxe
Tforce 965PT
Tforce 965


*can any1 post a pic of the modo when connect with 24pin power?
i wonder if i get the board and i using scythe ninja, how i do to adjust the cable with normal i cute atx case

I read in the Rebel's Haven forum that is :
1. TForce 965 Deluxe
2. TForce 965PT
3. TForce 965 Express

The express version is the one that supports 2.6v vdimm.

@taxidoor
I also have some problems routing the thick 24pin power cable For the 4 pin CPU power cable I routed it so that it goes from the PSU to the rear exhaust fan then bent 90 degrees to the connector on the board. I tried doing the same for the 24 pin but it was just too thick to properly route it..
BTW, does the Scyte Ninja use a metal black plate? you might need to insulate the metal black plate with insulating tape because the pins at the back of the motherboard will touch the back plate and you won't be able to POST. That's what happened with my Tr Ultra-120

This post has been edited by FLubber: Apr 10 2007, 02:24 PM

nono i havent get the board yet.. csz the 24pin issue..

Ninja is push pin way no back plate.. the problem is the ninja ar big

Anyone tried the leatest BIOS ??
I wanna clock my proc + mobo extremely for the last time b4 i send my 965PT for RMA. Pls shre some new result with me.. if anyone alrdy o'c with the new BIOS. Thanks.

Ive upgraded my rams to 2GB teamgroup value rams but dun seem to be able to boot my 965PT past 360FSB. Works fine with my previous Hynix C4 tho..

Have anyone tried the pencil mod..?

Ya, thr got someone have tried to do the pencil mod...
btw, teamgroup value ram not so good in OCing.....

CUrrently doing DDR 960MHZ @ DDR2 480MHZ 2.0V. Its PC5300 Value by the way.

AFAIK Corsair VS also can clock at 500MHz. But timing is quite loose.

u tried the pencil mod to increase vdimm?

New bios no difference to me. Still can't boot past 450FSB when pumped VMCH@1.35. Only the 1st version old bios could boot.

Im trying to figure out which is the temp for NB in my 965PT.



This post has been edited by intune: Apr 14 2007, 01:17 AM