Drill through the beam went wrong. --> https://forum.lowyat.net/topic/1940699/+220?hl=thick

does anyone know roughly how much cost for this kind of air conditioning ?

any recommend how much horsepower is enough for 2 shop ?


Thank you

8 to 10 horsepower

Don't scared him lah, got 1.5 to 10 Hp

Price is around Rm2k-6k

Normal aircon electric price is $0.15 sen for 1 hour . This 1 will be $ 0.85 sen per hours . Just get the normal 1 should be good for u

2 shops he is right, need total of 8-10 HP. My office 2k sqft we have total of 8hp. With two of these of 2.5hp each.

he is right, may need 4x 2.5 HP for his 2 shop, if cybercafe, better 6x 2.5HP because crowed people and heats from computers.

This post has been edited by Harold2009: Nov 29 2014, 10:41 AM

http://www.panasonic.com/my/consumer/home-...onditioner.html

seems like a few k at least

My bedroom size is about 14'x18'
What is recommended HP?

thinking to buy inverter tyupe either samsung,Panasonic(Econavi) or Mitsubishi( Mr Slim)
Mitsubishi is the most expensive

If i choose 1.5HP, will it be any issue?
--> eg: extra current usage to cool down the room especially inverter type
I understand that 1.5hp might not sufficient to cool down the whole room
My thinking is as long as bed area is cool, it is ok for me

Attached is my bedroom plan drawing


Attached thumbnail(s)

You only way go with 1.5hp also your room is quite empty and also big.

But in the Feng shui on the bed cannot direct facing on the door, maybe you have slightly adjust at center of the room.

Just simple input, pana won't be feel really over cold for you, either you can get york or daikin.

The rest Ah, just invest a little on ME inverter lah.
You won't regret

Move your bed to center, facing wall better. Air cond just get Pana or Mitsubishi, skip the Samsung.
Getting 1.5HP are ok for your room. Cool down faster which indirectly save your bill.

Face wall means that bed head facing air cond wall is it?
My concern on HP1.5 is that even though bed area already cool but compressor still work hard to cool the entire room.
On other words, it can't reach desired/setting temperature
Thus extra work out for compressor lead to extra current usage even though i choose inverter type
Would like to know whether my concern is correct?

HP2.0 too expensive though

Honestly if you really wanna get cold like going into bone then go for daikin/York non inveter but used R410a and setting temp on 22C for most human can't accept that cold like hell.

Also your bed frame move slightly at center of the room, then the air flow will direct to your sleep location as well.

If wanna budget then install York/Daikin 1.5Hp non inverter R410a or ME inverter 1.5Hp pay slightly higher only

This post has been edited by kimsim: Nov 30 2014, 12:46 PM

Why no samsung =( , i got 4pcs ac for my whole house

This post has been edited by chongkiatz: Nov 30 2014, 02:06 PM

Nope, facing next to your sliding door.
Mine are about 12*22 1.5HP also can make me freeze
So no problem.

First, no reliable and I'm anti Kimchi

will die after 3 year?

Something like that

Even the new Triangle? Mean after 3 year i will need to replace new aircond

Samsung very noisy one la the outdoor

me also planning to buy Samsung air cond due to the harga

really bising meh? currently using Hitachi which is super bising, when I came back from Friday late night badminton session at around 0200 hours, from 300m - 400m can already dengar the bunyi bising from my room punya aircond