Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed

Outline · [ Standard ] · Linear+

 (@_@)<>Proton CPS Tribe® V14<>(@_@), V13: Aug 28 2012 - Apr 25 2014 Dafuq?

views
     
TSCPS Tribe
post Apr 25 2014, 04:55 PM, updated 12y ago

New Member
*
Newbie
0 posts

Joined: Apr 2012
user posted image

Proton CPS Tribe® V13
Proton CPS Tribe® V12
Proton CPS Tribe® V11
Proton CPS Tribe® V10
Proton CPS Tribe® V9
Proton CPS Tribe® V8
Proton CPS Tribe® V7
Proton CPS Tribe® V6
Proton CPS Tribe® V5
Proton CPS Tribe® V4

* Please kindly include ur nick, name, the colour of your ride... and probably.. No. plate (maybe just no. will do. for security purpose)
and also transmission AT or MT
(Can also PM Azuma-kun your info. Will update the list asap)

*Format of info to be update on 1st page
nick (name) - model - colour - car no. - AT/MT

SC center commented by members
Mutiara Damansara
1. Appointment only
2. Saturday for normal service only, warranty claims during weekdays only

COE (Centre of Excellence)
1. so far so good

Senaxis Sdn. Bhd. (in taman mayang, SS25 PJ) credit to eastwest
1. So far so good. Done all my car service there. Satisfied with their service. nod.gif
2. First come first serve. thumbup.gif


user posted image

» Click to show Spoiler - click again to hide... «


user posted image

» Click to show Spoiler - click again to hide... «


user posted image

» Click to show Spoiler - click again to hide... «


user posted image

» Click to show Spoiler - click again to hide... «


Special Members list(one and only) whistling.gif
Zenwarlord-waja-mivec ->> Still here..hehe tongue.gif

Highest Mileage
» Click to show Spoiler - click again to hide... «


Record of services from CPS members
» Click to show Spoiler - click again to hide... «



MODIFICATION
Too many mods by CPSer, pening nak update laugh.gif


Problems encounter on received Waja CPS
1. Front fender squeezing sound
2. Alignment not properly done + tyre balancing is out, steering will shake after 110km/h
3. Buzzing sound from dash board after rpm reach 2.5k-3k
4. Front passenger side wiper couldn't hold the wiper properly, after fix back it still came off
5. Air-con compressor when active tat time will have "klok klok klok" sounds
6. AT cars having problem on "check engine" light
7. 5 case of PW incident happened ATM... 1. glass drop and break 2. glass lift fail to operate 3. short circuit on the PW control on door panel
8. Paint at the side mirror start to "peel" off after 1 year
9. power window motor for front passeger side burned. Claim warranty.
10. "Surround sound" -- dolby waja eh?? rclxub.gif

Problems encounter on received Gen2 CPS
...updating...

Problems encounter on received Neo CPS
1. Water pool at driver and front passenger side

Problems encounter on received Exora CPS
..info..


FC for waja -
1) [roughtly 0.16-0.18] + 40%= 0.23-0.25 cent/km(depends on the driver)
2) 11-14 km/l(depends on the driver)..record is 16km/l whistling.gif

FC for gen2
1) lgs -> RM0.16 = 11.25km/L -- RM0.13 = 13.85km/L
2) jVIPERs2 -> 7.0 +/- 0.1L/100KM
3) ezwann -> RM50 fuel (shell RM1.8/L) + RM67 (mobil Rm1.8/L) = 660km = 65 liter 50%highway 50%city OR 1 liter = 10.1km
4) shah333 -> 5.6-5.7l/100km - slgr town n highway - stock engine (1 liter = 17.54km)

This post has been edited by CPS Tribe: Apr 25 2014, 05:07 PM
TSCPS Tribe
post Apr 25 2014, 04:56 PM

New Member
*
Newbie
0 posts

Joined: Apr 2012
Members' mod list
» Click to show Spoiler - click again to hide... «



OUR ACTIVITIES
» Click to show Spoiler - click again to hide... «


ANNOUNCEMENT
» Click to show Spoiler - click again to hide... «


Come join us in Facebook more faster update and feedback.
Azuma-kun
post Apr 25 2014, 04:59 PM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
Parking here!
jctasoga
post Apr 25 2014, 05:00 PM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
I'm not here to spam anyway... but good thread!

by the way, engine choking at low speeds (very low) wat to check ah? spark plug seems ok. need to check o2 sensor / distributor KO? spark plug cable?

mine is MT. waja...
Azuma-kun
post Apr 25 2014, 05:02 PM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
At what RPM?
raclette
post Apr 25 2014, 06:01 PM

Casual
***
Junior Member
428 posts

Joined: Aug 2009
hi (neo cps)
TripleJ104
post Apr 25 2014, 06:48 PM

New Member
*
Junior Member
11 posts

Joined: Jan 2010
New thread!!! :thumb:


ahpaul82
post Apr 25 2014, 06:50 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(jctasoga @ Apr 25 2014, 05:00 PM)
I'm not here to spam anyway... but good thread!

by the way, engine choking at low speeds (very low) wat to check ah? spark plug seems ok. need to check o2 sensor / distributor KO? spark plug cable?

mine is MT. waja...
*
I'm also facing low RPM choking last time,
You can refer old thread,
Eventually I found out is the Distributor buat kacau..
But that time I changed quite of components lah,
From spark plug, plug cable, distributor and O2 sensor.
fazron80
post Apr 25 2014, 10:43 PM

New Member
*
Junior Member
27 posts

Joined: Oct 2007
QUOTE(jctasoga @ Apr 25 2014, 05:00 PM)
I'm not here to spam anyway... but good thread!

by the way, engine choking at low speeds (very low) wat to check ah? spark plug seems ok. need to check o2 sensor / distributor KO? spark plug cable?

mine is MT. waja...
*
Mine also sometimes choking. Usually when in 3rd gear @ low rpm. O2 sensor change edy. I'm thinking mine is because of clutch. Too long use already near to 200k.
ajaibman
post Apr 25 2014, 11:02 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
Park here,

The 1st post not updated meh?
brewoe_1988
post Apr 26 2014, 12:43 AM

Getting Started
**
Junior Member
175 posts

Joined: Mar 2006
wa new thread ad.... i saw someone can archive 600km for full tank for waja cps....*jealous*
anarchy2cruo
post Apr 26 2014, 12:56 AM

On my way
****
Senior Member
679 posts

Joined: Mar 2009
From: LGK
QUOTE(Azuma-kun @ Apr 25 2014, 04:33 PM)
As for FC, when my waja was still virgin, full tank will goes from 750-800km. Uncle style drive. Very pain in the @ss.
But now after all the mods, taken out the mods again, full tank only can go up to 550km laugh.gif

Worst, 250km/full tank with redline at all gears, habis meter few times. That was on highway from Rnr Sg Perak to my house parking lot in Cheras, in 1 hour 15 minutes. So dont use that as your reference laugh.gif
*
shocking.gif shocking.gif shocking.gif
notworthy.gif notworthy.gif notworthy.gif
dasyat giloo.. thumbup.gif
Azuma-kun
post Apr 26 2014, 01:32 AM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
QUOTE(brewoe_1988 @ Apr 26 2014, 12:43 AM)
wa new thread ad.... i saw someone can archive 600km for full tank for waja cps....*jealous*
*
No one can do that anymore hahaha
Azuma-kun
post Apr 26 2014, 01:35 AM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
QUOTE(anarchy2cruo @ Apr 26 2014, 12:56 AM)
shocking.gif  shocking.gif  shocking.gif
notworthy.gif  notworthy.gif  notworthy.gif
dasyat giloo.. thumbup.gif
*
Old time bro. Now drive like uncle. Engine is sick after the broken crankshaft tongue.gif
brewoe_1988
post Apr 26 2014, 10:17 AM

Getting Started
**
Junior Member
175 posts

Joined: Mar 2006
but frankly speaking my fc i felt is bad..avg 9.3km/l..anything can be done ?go proton sc ask them check? @@
Max
post Apr 26 2014, 08:34 PM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
Park also. Neo cps R3
angrysnail
post Apr 26 2014, 09:47 PM

SuperStars
******
Senior Member
1,413 posts

Joined: Aug 2009
From: Damansara
CPS R3 T here.
jctasoga
post Apr 28 2014, 09:30 AM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
distributor eh...hm... going to cost quite a bit to source a new one... T_T
ahpaul82
post Apr 28 2014, 11:25 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(jctasoga @ Apr 28 2014, 09:30 AM)
distributor eh...hm... going to cost quite a bit to source a new one... T_T
*
Our Ignition Coil from Bosch,

the price is <RM200 lah.

Should called it as Ignition Coil because Distributor is stand for other type.

Ignition Coil PW811201 197.34

Attached Image

if Waja/Neo/Gen2/Exora is using same Ignition Coil lah..


Question,

do you like to use Gear3 to push your car when your car speed is less than 30km/h?

This post has been edited by ahpaul82: Apr 28 2014, 11:27 PM
lowpro
post Apr 29 2014, 09:52 AM

Getting Started
**
Junior Member
180 posts

Joined: Jan 2009
QUOTE(CPS Tribe @ Apr 25 2014, 04:56 PM)
Members' mod list
» Click to show Spoiler - click again to hide... «

OUR ACTIVITIES
» Click to show Spoiler - click again to hide... «


ANNOUNCEMENT
» Click to show Spoiler - click again to hide... «


Come join us in Facebook more faster update and feedback.
*
This post has been edited by lowpro: Apr 29 2014, 09:54 AM
eastwest
post Apr 29 2014, 11:06 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(jctasoga @ Apr 25 2014, 05:00 PM)
I'm not here to spam anyway... but good thread!

by the way, engine choking at low speeds (very low) wat to check ah? spark plug seems ok. need to check o2 sensor / distributor KO? spark plug cable?

mine is MT. waja...
*
engine choking? how to identity tongue.gif ?

QUOTE(angrysnail @ Apr 26 2014, 09:47 PM)
CPS R3 T here.
*
neo r3?
angrysnail
post Apr 29 2014, 01:09 PM

SuperStars
******
Senior Member
1,413 posts

Joined: Aug 2009
From: Damansara
QUOTE(eastwest @ Apr 29 2014, 11:06 AM)
neo r3?
*
Yup.but not that 80k edition la.the power not worth it just for collectors.
eastwest
post Apr 29 2014, 02:05 PM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(angrysnail @ Apr 29 2014, 01:09 PM)
Yup.but not that 80k edition la.the power not worth it just for collectors.
*
I see. the 125hp edition... biggrin.gif
angrysnail
post Apr 29 2014, 03:11 PM

SuperStars
******
Senior Member
1,413 posts

Joined: Aug 2009
From: Damansara
QUOTE(eastwest @ Apr 29 2014, 02:05 PM)
I see. the 125hp edition... biggrin.gif
*
mine 200whp edition already.hehe..
eastwest
post Apr 29 2014, 03:28 PM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(angrysnail @ Apr 29 2014, 03:11 PM)
mine 200whp edition already.hehe..
*
what mod bro?
angrysnail
post Apr 29 2014, 04:30 PM

SuperStars
******
Senior Member
1,413 posts

Joined: Aug 2009
From: Damansara
QUOTE(eastwest @ Apr 29 2014, 03:28 PM)
what mod bro?
*
Not much.just set of R3 exhaust system,custom turbine manifold, piece of turbine with wastegate,set of piping together with blow off and intercooler.haltech interceptor plus an extra injector. brows.gif
eastwest
post Apr 29 2014, 05:31 PM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(angrysnail @ Apr 29 2014, 04:30 PM)
Not much.just set of R3 exhaust system,custom turbine manifold, piece of turbine with wastegate,set of piping together with blow off and intercooler.haltech interceptor plus an extra injector. brows.gif
*
rclxms.gif
kobzng
post Apr 29 2014, 05:54 PM

New Member
*
Newbie
1 posts

Joined: Apr 2014
R3 CPS stock standard ... =D
marzuk88
post Apr 29 2014, 11:51 PM

New Member
*
Newbie
0 posts

Joined: Jul 2012
QUOTE(kobzng @ Apr 29 2014, 05:54 PM)
R3 CPS stock standard ... =D
*
Nice! welcome2 bro! im sure you're getting started with mods after kena racun
kobzng
post Apr 30 2014, 01:11 PM

New Member
*
Newbie
1 posts

Joined: Apr 2014
QUOTE(marzuk88 @ Apr 29 2014, 11:51 PM)
Nice! welcome2 bro! im sure you're getting started with mods after kena racun
*
i kena racun stage 3 already brother ... hahaha...
now budgeting and planning and also getting more experienced infos from all abang2.
ajaibman
post Apr 30 2014, 04:01 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(angrysnail @ Apr 29 2014, 04:30 PM)
Not much.just set of R3 exhaust system,custom turbine manifold, piece of turbine with wastegate,set of piping together with blow off and intercooler.haltech interceptor plus an extra injector. brows.gif
*
No wonder I saw CPS R3 (T) -> tu yang buat special..


Then my Exo should be called Exora CPS Kompressor
Azuma-kun
post Apr 30 2014, 05:35 PM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
Exora CPS S ?
angrysnail
post Apr 30 2014, 09:18 PM

SuperStars
******
Senior Member
1,413 posts

Joined: Aug 2009
From: Damansara
QUOTE(ajaibman @ Apr 30 2014, 04:01 PM)
No wonder I saw CPS R3 (T) -> tu yang buat special..
Then my Exo should be called Exora CPS Kompressor
*
Sprintex ke bro?thinking to get supercharged too but dunno how it end with turbo..lol..urs with methanol injection kit ke?..hehe..
marzuk88
post Apr 30 2014, 10:11 PM

New Member
*
Newbie
0 posts

Joined: Jul 2012
QUOTE(angrysnail @ Apr 30 2014, 09:18 PM)
Sprintex ke bro?thinking to get supercharged too but dunno how it end with turbo..lol..urs with methanol injection kit ke?..hehe..
*
ajaibman's SC exora runs on stand alone management. On the road golf GTI pun nervous..oh btw 1 question, mind sharing your injector size..thanks man!
marzuk88
post Apr 30 2014, 10:56 PM

New Member
*
Newbie
0 posts

Joined: Jul 2012
QUOTE(CPS Tribe @ Apr 25 2014, 04:56 PM)
Members' mod list
» Click to show Spoiler - click again to hide... «

OUR ACTIVITIES
» Click to show Spoiler - click again to hide... «


ANNOUNCEMENT
» Click to show Spoiler - click again to hide... «


Come join us in Facebook more faster update and feedback.
*
ajaibman
post May 1 2014, 04:48 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(angrysnail @ Apr 30 2014, 09:18 PM)
Sprintex ke bro?thinking to get supercharged too but dunno how it end with turbo..lol..urs with methanol injection kit ke?..hehe..
*
Still running 101 degrees during high RPM (not reaching 120) on the Air Temp.. So still can tahan with the 0.6 bar of boost.. Unless I want to increase to 0.9 (change the pulley size) then I will seriously considering change the piston and reduce the compression + water methanol.

Like dis setting can toe to toe with Audi Q7.. offcourse after 180 km/h then Q7 will say bye2...


fazron80
post May 1 2014, 08:01 PM

New Member
*
Junior Member
27 posts

Joined: Oct 2007
QUOTE(ajaibman @ May 1 2014, 04:48 PM)
Still running 101 degrees during high RPM (not reaching 120) on the Air Temp.. So still can tahan with the 0.6 bar of boost.. Unless I want to increase to 0.9 (change the pulley size) then I will seriously considering change the piston and reduce the compression + water methanol.

Like dis setting can toe to toe with Audi Q7.. offcourse after 180 km/h then Q7 will say bye2...
*
Top speed increase? Same?
ajaibman
post May 1 2014, 11:18 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(fazron80 @ May 1 2014, 08:01 PM)
Top speed increase? Same?
*
Ntah speedometer sampai 180 kmh shj
fazron80
post May 1 2014, 11:22 PM

New Member
*
Junior Member
27 posts

Joined: Oct 2007
supercharge power start dari brp rpm sampai brp rpm habis?
abz
post May 1 2014, 11:42 PM

Getting Started
**
Junior Member
113 posts

Joined: Mar 2009
QUOTE(ajaibman @ May 1 2014, 04:48 PM)
Still running 101 degrees during high RPM (not reaching 120) on the Air Temp.. So still can tahan with the 0.6 bar of boost.. Unless I want to increase to 0.9 (change the pulley size) then I will seriously considering change the piston and reduce the compression + water methanol.

Like dis setting can toe to toe with Audi Q7.. offcourse after 180 km/h then Q7 will say bye2...
*
The operating temp at high rpm seems to be high. I think it would not be good for long distance high speed. You know how much is the water methanol system? How frequent need to top up the methanol?

Im interested to know more about the supercharging my cps before installing it.
ajaibman
post May 2 2014, 12:13 AM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(abz @ May 1 2014, 11:42 PM)
The operating temp at high rpm seems to be high. I think it would not be good for long distance high speed. You know how much is the water methanol system? How frequent need to top up the methanol?

Im interested to know more about the supercharging my cps before installing it.
*
Campro itself already a hot engine running by design. I did not encouter knocking running full throttle during kl- ipoh run on broad day light. However, according to gt auto if want to achieve optimum power from the engine need to reduce the compression, and increase the boost.

The water injection cost around 2500 rm, usually the injection only use during certain rpm and not through out the entire rpm range. So give n take around one week if u kaki tekan need to top up.
ajaibman
post May 2 2014, 12:17 AM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(fazron80 @ May 1 2014, 11:22 PM)
supercharge power start dari brp rpm sampai brp rpm habis?
*
From engine idle until rpm cut off. But full bost around 1.5 k, idle around 0.2 boost already.
ajaibman
post May 2 2014, 01:27 AM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
Word of advice,

If you want to BOT or Supercharger your CPS, please make sure that your car or your CPS has a Manual Tranny attached.

Else you will end up having a bad Auto Transmission experience as the TCU can't do proper calculation on the newly gain power from the flywheel.
kobzng
post May 2 2014, 11:07 AM

New Member
*
Newbie
1 posts

Joined: Apr 2014
QUOTE(ajaibman @ May 2 2014, 01:27 AM)
Word of advice,

If you want to BOT or Supercharger your CPS, please make sure that your car or your CPS has a Manual Tranny attached.

Else you will end up having a bad Auto Transmission experience as the TCU can't do proper calculation on the newly gain power from the flywheel.
*
Hey brother ajaibman, do you have any advice on stand alone engine management ?
My CPS R3 is stock, I just want to do stand alone and fine tune the stock engine.
So do you have any brands/workshop that you can intro me to? I am new to this.
Thanks in advance =D
TripleJ104
post May 4 2014, 04:40 PM

New Member
*
Junior Member
11 posts

Joined: Jan 2010
Wow...such strong poison, supercharge & turbo..

Saw the water injection kit aem brand, is it the same thing?
ajaibman
post May 5 2014, 11:30 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(kobzng @ May 2 2014, 11:07 AM)
Hey brother ajaibman, do you have any advice on stand alone engine management ?
My CPS R3 is stock, I just want to do stand alone and fine tune the stock engine.
So do you have any brands/workshop that you can intro me to? I am new to this.
Thanks in advance =D
*
Going on full stand alone is.a waste of money unless your car is fully mod or had some sort of force induction.

A piggyback will be more than enough to tweak your engine to the optimum effect. (make.sure.its compatible.with close loop ecu)

Example: smt8, dastek unichip, works ems2

Have you do the basic mod like extractor exhaust full system and.crank/cam pulley + fuel.pressure regulator tunimg.yet?

R.Y.D.E.C.K
post May 9 2014, 11:13 AM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
the most unproductive slow f̶u̶c̶k̶i̶n̶g̶ ̶ tered in Lowyat laugh.gif laugh.gif hiphip..horiooo laugh.gif
kobzng
post May 9 2014, 12:42 PM

New Member
*
Newbie
1 posts

Joined: Apr 2014
QUOTE(ajaibman @ May 5 2014, 11:30 PM)
Going on full stand alone is.a waste of money unless your car is fully mod or had some sort of force induction.

A piggyback will be more than enough to tweak your engine to the optimum effect. (make.sure.its compatible.with close loop ecu)

Example: smt8, dastek unichip, works ems2

Have you do the basic mod like extractor exhaust full system and.crank/cam pulley + fuel.pressure regulator tunimg.yet?
*
I see... I haven't got any of those.
Due to budget constrain, I am actually saving up for all these. Hehe.
Thanks for clearing up for me.
I'm looking at changing full set exhaust system, light weight crank pulley and fuel regulator only...
If I can get the R3 specs High Cam lagi best...
then with all these installed then I shall proceed with piggyback.

This post has been edited by kobzng: May 9 2014, 12:49 PM
ahpaul82
post May 9 2014, 03:02 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(R.Y.D.E.C.K @ May 9 2014, 11:13 AM)
the most unproductive slow f̶u̶c̶k̶i̶n̶g̶ ̶  tered in Lowyat  laugh.gif  laugh.gif hiphip..horiooo laugh.gif
*
All active in Facebook punya pasal..
Hehe.

QUOTE(kobzng @ May 9 2014, 12:42 PM)
I see... I haven't got any of those.
Due to budget constrain, I am actually saving up for all these. Hehe.
Thanks for clearing up for me.
I'm looking at changing full set exhaust system, light weight crank pulley and fuel regulator only...
If I can get the R3 specs High Cam lagi best...
then with all these installed then I shall proceed with piggyback.
*
Our Bro Marzuk88 using MatSpeed R3 Hi-Cam with R3 ECU and other mods, (fully loaded)
Tempting to try his car if he is in KL. biggrin.gif

Other Bro like lowpro also completed R3 exhaust system with R3 ECU too,
I guess he should satisfy the engine output, period.

Bro TripleJ104 is the only Waja CPS that using R3 extractor only I guess?
ahpaul82
post May 9 2014, 03:03 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
Bro sphiroth rarely come in anymore, his Waja CPS used to have many modding too ..

Bro kobe10 engine meletup and changed to Mitsubishi engine already if I remember correctly.

Bro ajaibman is the only Supercharged Exora CPS that I know..

Ultimately is our taiko Azuma-kum already de-moded liao..

Who else I missed out? LOL

Single reply only can tag 5peoples only pula..
R.Y.D.E.C.K
post May 9 2014, 03:04 PM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(ahpaul82 @ May 9 2014, 03:03 PM)
Bro sphiroth rarely come in anymore, his Waja CPS used to have many modding too ..

Bro kobe10 engine meletup and changed to Mitsubishi engine already if I remember correctly.

Bro ajaibman is the only Supercharged Exora CPS that I know..

Ultimately is our taiko Azuma-kum already de-moded liao.. 

Who else I missed out? LOL

Single reply only can tag 5peoples only pula..
*
(Y)
lowpro
post May 9 2014, 05:36 PM

Getting Started
**
Junior Member
180 posts

Joined: Jan 2009
i've skimmed my flywheel and am using 1.8L clutch now. also, using a wider air filter intake plus fuel regulator.

This post has been edited by lowpro: May 9 2014, 05:37 PM
ahpaul82
post May 10 2014, 01:41 AM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(R.Y.D.E.C.K @ May 9 2014, 03:04 PM)
(Y)
*
Bro R.Y.D.E.C.K still using Waja CPS? whistling.gif

QUOTE(lowpro @ May 9 2014, 05:36 PM)
i've skimmed my flywheel and am using 1.8L clutch now. also, using a wider air filter intake plus fuel regulator.
*
Please share more if you don't mind,

coz I believe my car is time to change clutch as well.

which 1.8L clutch cover/plate you are using now?

Wira/Satria GTi?
kobe10
post May 10 2014, 02:16 AM

New Member
*
Junior Member
6 posts

Joined: Apr 2009
From: Puchong, Selangor
Hehehe...Engine meletup already then change to Mivec...But due to halfcut condition, I need to slowly change all the parts... Mounting all pecah, suspension all byebye already...Just purely maintaining it only. Guys if you all want to play with semi race clutch, I can intro you to a shop that custom your clutch plate. Just bring your ori clutch plate to the shop and the guy will do it 6 puck with higher quality clutch plate. At Jalan Ipoh... 350 only.... very grippy oh...
Azuma-kun
post May 10 2014, 02:41 AM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
Hahaha de-mod is the most painful things to do sweat.gif
lowpro
post May 10 2014, 11:19 AM

Getting Started
**
Junior Member
180 posts

Joined: Jan 2009
QUOTE(ahpaul82 @ May 10 2014, 01:41 AM)
Bro R.Y.D.E.C.K still using Waja CPS?  whistling.gif
Please share more if you don't mind,

coz I believe my car is time to change clutch as well. 

which 1.8L clutch cover/plate you are using now?

Wira/Satria GTi?
*
My clutch is an exedy 8.5 inch for 4g93. The flywheel has been skimmed to suit the clutch.
ahpaul82
post May 11 2014, 03:07 AM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(lowpro @ May 10 2014, 11:19 AM)
My clutch is an exedy 8.5 inch for 4g93. The flywheel has been skimmed to suit the clutch.
*
Hmmm...

info extracted from Exedy Malaysia website:
Attached Image

No issue on the additional 15mm? hmm.gif
TripleJ104
post May 11 2014, 08:17 AM

New Member
*
Junior Member
11 posts

Joined: Jan 2010
I guess only me use r3 header. Else like bro ah paul & bro marzuk use full r3 exhaust system. But still i cant beat mutt cps ride. Exhaust system by kaki exhaust only, but very fast above 140kmj
TripleJ104
post May 11 2014, 08:20 AM

New Member
*
Junior Member
11 posts

Joined: Jan 2010
@lowpro, i would like a review & tips about skimmimg the oem flywheel. Im thinking of this too..
ajaibman
post May 11 2014, 09:59 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(TripleJ104 @ May 11 2014, 08:17 AM)
I guess only me use r3 header. Else like bro ah paul & bro marzuk use full r3 exhaust system. But still i cant beat mutt cps ride. Exhaust system by kaki exhaust only, but very fast above 140kmj
*
I have seen the Lotus Neo with Black Extractor is that the R3 one? or different? because I heard that black extractor cost a bomb..
Xu3r
post May 11 2014, 10:01 PM

Getting Started
**
Junior Member
134 posts

Joined: Nov 2011
anyone equipped with supercharger kit ?
ahpaul82
post May 11 2014, 10:07 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(ajaibman @ May 11 2014, 09:59 PM)
I have seen the Lotus Neo with Black Extractor is that the R3 one? or different? because I heard that black extractor cost a bomb..
*
Standard R3 Extractor is Chrome/stainless steel color.

the black color one you saw I guess is Ceramic Coated?

I did enquiry the pricing few years back :

Attached Image

sweat.gif
ajaibman
post May 11 2014, 10:09 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(ahpaul82 @ May 11 2014, 10:07 PM)
Standard R3 Extractor is Chrome/stainless steel color. 

the black color one you saw I guess is Ceramic Coated?

I did enquiry the pricing few years back :

Attached Image

sweat.gif
*
user posted image
ahpaul82
post May 11 2014, 11:41 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(ajaibman @ May 11 2014, 10:09 PM)
user posted image
*
Satria Neo R3 Extractor that Proton R3 selling :
Attached Image

you can noticed the piping layout is different.
lowpro
post May 12 2014, 08:59 AM

Getting Started
**
Junior Member
180 posts

Joined: Jan 2009
QUOTE(ahpaul82 @ May 11 2014, 03:07 AM)
Hmmm...

info extracted from Exedy Malaysia website:
Attached Image

No issue on the additional 15mm?  hmm.gif
*
Not sure how my mech got it to fit but I think he got the flywheel skimmed. I'll ask him.
lowpro
post May 12 2014, 09:00 AM

Getting Started
**
Junior Member
180 posts

Joined: Jan 2009
QUOTE(TripleJ104 @ May 11 2014, 08:20 AM)
@lowpro, i would like a review & tips about skimmimg the oem flywheel. Im thinking of this too..
*
Alamak, I don't know how to explain lah. I will check with my mech on this.
ajaibman
post May 12 2014, 12:02 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(ahpaul82 @ May 11 2014, 11:41 PM)
Satria Neo R3 Extractor that Proton R3 selling :
Attached Image

you can noticed the piping layout is different.
*
Yes, its different.. Price also different sad.gif
Max
post May 12 2014, 02:20 PM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
anybody interest in campro big snorkel scoop set?
PnP for CPS engine.
more air intake, less restriction compare to stock cps snorkel scoop. smile.gif

[attachmentid=3967576]

This post has been edited by Max: Oct 9 2014, 04:39 PM
abz
post May 12 2014, 02:56 PM

Getting Started
**
Junior Member
113 posts

Joined: Mar 2009
QUOTE(Max @ May 12 2014, 02:20 PM)
anybody interest in campro big snorkel scoop set?
PnP for CPS engine.
more air intake, less restriction compare to stock cps snorkel scoop.  smile.gif

[attachmentid=3967576]
*
Why there is a slot at the side? What is it for?
Max
post May 12 2014, 03:41 PM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
QUOTE(abz @ May 12 2014, 02:56 PM)
Why there is a slot at the side? What is it for?
*
this 1 came from Neo Campro.
this is the biggest snorkel scoop set in campro engine family. only got from neo campro.

this slot u mean? in campro this is mounting hole for bolt.
need to cut half to put in CPS engine.
Attached Image

this is another set in my car. Neo CPS.
Attached Image


abz
post May 12 2014, 03:54 PM

Getting Started
**
Junior Member
113 posts

Joined: Mar 2009
QUOTE(Max @ May 12 2014, 03:41 PM)
this 1 came from Neo Campro.
this is the biggest snorkel scoop set in campro engine family. only got from neo campro.

this slot u mean? in campro this is mounting hole for bolt.
need to cut half to put in CPS engine.
Attached Image

this is another set in my car. Neo CPS.
Attached Image
*
Pm'ed u
lowpro
post May 14 2014, 09:15 AM

Getting Started
**
Junior Member
180 posts

Joined: Jan 2009
QUOTE(Max @ May 12 2014, 02:20 PM)
anybody interest in campro big snorkel scoop set?
PnP for CPS engine.
more air intake, less restriction compare to stock cps snorkel scoop.  smile.gif

[attachmentid=3967576]
*
hey i got one of it too! but kinda pinjam from my mech lah. very nice for high speeds. even at 180kph, it just keeps on sucking! do pm the price. just need the scoop as i have already bought the pipe that leads to the manifold for RM90.
Max
post May 14 2014, 09:53 AM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
QUOTE(lowpro @ May 14 2014, 09:15 AM)
hey i got one of it too! but kinda pinjam from my mech lah. very nice for high speeds. even at 180kph, it just keeps on sucking! do pm the price. just need the scoop as i have already bought the pipe that leads to the manifold for RM90.
*
sorry bro.
already sold.. buyer take last nite. thumbup.gif
slvn
post May 14 2014, 02:06 PM

Casual
***
Junior Member
384 posts

Joined: Oct 2008
From: Shah Alam/Petaling Jaya/Damansara
guys..mane nak cari cam valley cover for cps?
ahpaul82
post May 14 2014, 10:06 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(slvn @ May 14 2014, 02:06 PM)
guys..mane nak cari cam valley cover for cps?
*
You mean this one?

Attached Image

Engine Cover Trim PW810820 RM23.89

should be available in any spare part shops provided you show them the photo and P/N. nod.gif
TripleJ104
post May 14 2014, 10:12 PM

New Member
*
Junior Member
11 posts

Joined: Jan 2010
Bro Ah paul at his best..thumbup.gif
ahpaul82
post May 14 2014, 10:17 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
Haha,

Just too bad I don't have Hydraulic Lift (Car Garage would be good words) and knowledge to repair my car,

Else I will prefer DIY,

macam PC DIY. biggrin.gif laugh.gif
TripleJ104
post May 14 2014, 10:23 PM

New Member
*
Junior Member
11 posts

Joined: Jan 2010
QUOTE(ahpaul82 @ May 14 2014, 10:17 PM)
Haha,

Just too bad I don't have Hydraulic Lift (Car Garage would be good words) and knowledge to repair my car,

Else I will prefer DIY,

macam PC DIY.  biggrin.gif  laugh.gif
*
Huhu..I want to DIY like simple job changing EO, filters & spark plug but scared I damage my engine.

Bro ah paul how tight is to screw the spark plug?
ahpaul82
post May 14 2014, 10:35 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(TripleJ104 @ May 14 2014, 10:23 PM)
Huhu..I want to DIY like simple job changing EO, filters & spark plug but scared I damage my engine.

Bro ah paul how tight is to screw the spark plug?
*
Yeah, I wish I can do those replacement by myself,

but unfortunately I don't have space.. sad.gif

Do you have Torque Wrench?

Attached Image

I had bought a simple tool to replace spark plug but I don't dare to try.. haha.
angrysnail
post May 14 2014, 10:53 PM

SuperStars
******
Senior Member
1,413 posts

Joined: Aug 2009
From: Damansara
QUOTE(ahpaul82 @ May 14 2014, 10:35 PM)
Yeah, I wish I can do those replacement by myself,

but unfortunately I don't have space.. sad.gif

Do you have Torque Wrench?

Attached Image

I had bought a simple tool to replace spark plug but I don't dare to try.. haha.
*
Just 15Nm?Kinda low heh..Hand tight should be around 25Nm like you tightening the oil filter..
ahpaul82
post May 14 2014, 11:40 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(angrysnail @ May 14 2014, 10:53 PM)
Just 15Nm?Kinda low heh..Hand tight should be around 25Nm like you tightening the oil filter..
*
After re-checked,

I found out this:

Attached Image

Attached Image

But also found this:

Attached Image

Guess that Proton using "Special Tools" to measure the Torque value kot? sweat.gif
surefire v LED
post May 14 2014, 11:49 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
QUOTE(TripleJ104 @ May 14 2014, 10:23 PM)
Huhu..I want to DIY like simple job changing EO, filters & spark plug but scared I damage my engine.

Bro ah paul how tight is to screw the spark plug?
*
Hantar kedai RM5 biggrin.gif
angrysnail
post May 14 2014, 11:51 PM

SuperStars
******
Senior Member
1,413 posts

Joined: Aug 2009
From: Damansara
» Click to show Spoiler - click again to hide... «

Something is not right.and yeah..15Nm is like you tighten 10mm screw only..
Read the oil filter instruction,our hand is more than that..

user posted image
angrysnail
post May 14 2014, 11:57 PM

SuperStars
******
Senior Member
1,413 posts

Joined: Aug 2009
From: Damansara
QUOTE(surefire v LED @ May 14 2014, 11:49 PM)
Hantar kedai RM5  biggrin.gif
*
At shop they all do quite fast because wanna chase time.if do ur self u can wait till last drop especially if u r changing from mineral oil to fully synthetic oil.
surefire v LED
post May 15 2014, 01:06 AM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
QUOTE(angrysnail @ May 14 2014, 11:57 PM)
At shop they all do quite fast because wanna chase time.if do ur self u can wait till last drop especially if u r changing from mineral oil to fully synthetic oil.
*
i told them wait for at least 15 minutes than screw back the nut for the oil seal (taukeh kasi lama² sikit buang itu minyak hitam aaa) biggrin.gif
angrysnail
post May 15 2014, 10:14 AM

SuperStars
******
Senior Member
1,413 posts

Joined: Aug 2009
From: Damansara
QUOTE(surefire v LED @ May 15 2014, 01:06 AM)
i told them wait for at least 15 minutes than screw back the nut for the oil seal (taukeh kasi lama² sikit buang itu minyak hitam aaa)  biggrin.gif
*
Hehe..that for you la bro..sometimes i also send to my friend shop but most of the time i do it myself..kinda weird if can do V type engine overhaul but can't do simple cps service.. laugh.gif
ajaibman
post May 15 2014, 11:42 AM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(angrysnail @ May 14 2014, 11:57 PM)
At shop they all do quite fast because wanna chase time.if do ur self u can wait till last drop especially if u r changing from mineral oil to fully synthetic oil.
*
Sometimes if the workshop quite diligent, they tembak angin from the oil cap to get rid of all the residue in from cylinder head...
R.Y.D.E.C.K
post May 15 2014, 11:50 AM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(ahpaul82 @ May 14 2014, 11:40 PM)
After re-checked,

I found out this:

Attached Image

Attached Image

But also found this:

Attached Image

Guess that Proton using "Special Tools" to measure the Torque value kot?  sweat.gif
*
aha paul..still inside my hatttt cry.gif
angrysnail
post May 15 2014, 12:54 PM

SuperStars
******
Senior Member
1,413 posts

Joined: Aug 2009
From: Damansara
QUOTE(ajaibman @ May 15 2014, 11:42 AM)
Sometimes if the workshop quite diligent, they tembak angin from the oil cap to get rid of all the residue in from cylinder head...
*
But that not recommended because in the air compression it always contains water and moisture.by doing that they indirectly spray the water in your engine if they do drain the water from the compressor than its ok.
ajaibman
post May 15 2014, 01:24 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(angrysnail @ May 15 2014, 12:54 PM)
But that not recommended because in the air compression it always contains water and moisture.by doing that they indirectly spray the water in your engine if they do drain the water from the compressor than its ok.
*
OMG.. just thought of getting Water Methanol injection... .. cry.gif
angrysnail
post May 15 2014, 01:30 PM

SuperStars
******
Senior Member
1,413 posts

Joined: Aug 2009
From: Damansara
QUOTE(ajaibman @ May 15 2014, 01:24 PM)
OMG.. just thought of getting Water Methanol injection... ..  cry.gif
*
Water methanol injection its different thingla..haha..the water not mixed with the moisture+dust like air compressor did.somemore with methanol+water just play on ur intake and combustion side not with ur lubrication system.
ajaibman
post May 15 2014, 01:36 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(angrysnail @ May 15 2014, 01:30 PM)
Water methanol injection its different thingla..haha..the water not mixed with the moisture+dust like air compressor did.somemore with methanol+water just play on ur intake and combustion side not with ur lubrication system.
*
OK Sifu... notworthy.gif
da drummer
post May 18 2014, 01:03 AM

:)
*****
Senior Member
808 posts

Joined: Jun 2008
From: ~Negeri Sembilan~Sarawak~
Hye,next week will service waja cps.first time send it myself.so what should i change?any suggestion for brand?like brand for minyam hitam..semi synthetic full synthetic tu ape?

And how much it will cost?

Tq n sorry for noob question
surefire v LED
post May 19 2014, 08:56 AM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
To my fellow Muslim CPS owner.
» Click to show Spoiler - click again to hide... «
TripleJ104
post May 19 2014, 11:10 AM

New Member
*
Junior Member
11 posts

Joined: Jan 2010
QUOTE(ahpaul82 @ May 14 2014, 10:35 PM)
Yeah, I wish I can do those replacement by myself,

but unfortunately I don't have space.. sad.gif

Do you have Torque Wrench?

Attached Image

I had bought a simple tool to replace spark plug but I don't dare to try.. haha.
*
Thinking buying the tool but still didnt have the heart to DIY sweat.gif .

QUOTE(da drummer @ May 18 2014, 01:03 AM)
Hye,next week will service waja cps.first time send it myself.so what should i change?any suggestion for brand?like brand for minyam hitam..semi synthetic full synthetic tu ape?

And how much it will cost?

Tq n sorry for noob question
*
Service at what mileage? usually just follow service centre recommendation, but if u state what km u are now i can guess what can be replace or service.

For engine oil depends what u comfortable to use, im now using Bardhal 5w40 fully synthetic. Excellent quality at cheap price. Semi syn & fully Syn u can google up for info.

cheers

QUOTE(surefire v LED @ May 19 2014, 08:56 AM)
To my fellow Muslim CPS owner.
» Click to show Spoiler - click again to hide... «

*
thumbup.gif
marzuk88
post May 20 2014, 11:44 PM

New Member
*
Newbie
0 posts

Joined: Jul 2012
QUOTE(ajaibman @ May 11 2014, 09:59 PM)
I have seen the Lotus Neo with Black Extractor is that the R3 one? or different? because I heard that black extractor cost a bomb..
*
Read it somewhere in fb. GCC selling those r3 lotus racing ceramic coated Extractor at 3k...
eastwest
post May 22 2014, 09:52 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
halo yawn.gif
TripleJ104
post May 22 2014, 10:18 AM

New Member
*
Junior Member
11 posts

Joined: Jan 2010
hello...how it is going guys?

Yesterday i loan tool from workshop & i tried my self untighten the spark plug, look not that tight. But tighten it need to be a bit firm. not much..
eastwest
post May 22 2014, 10:28 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(TripleJ104 @ May 22 2014, 10:18 AM)
hello...how it is going guys?

Yesterday i loan tool from workshop & i tried my self untighten the spark plug, look not that tight. But tighten it need to be a bit firm. not much..
*
Normal day...lol...

Spark plug problem, bro?
ahpaul82
post May 25 2014, 12:37 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(TripleJ104 @ May 22 2014, 10:18 AM)
hello...how it is going guys?

Yesterday i loan tool from workshop & i tried my self untighten the spark plug, look not that tight. But tighten it need to be a bit firm. not much..
*
Removed spark plug to check condition?
da drummer
post May 25 2014, 09:34 PM

:)
*****
Senior Member
808 posts

Joined: Jun 2008
From: ~Negeri Sembilan~Sarawak~
QUOTE(TripleJ104 @ May 19 2014, 11:10 AM)
Thinking buying the tool but still didnt have the heart to DIY sweat.gif .
Service at what mileage? usually just follow service centre recommendation, but if u state what km u are now i can guess what can be replace or service.

For engine oil depends what u comfortable to use, im now using Bardhal 5w40 fully synthetic. Excellent quality at cheap price. Semi syn & fully Syn u can google up for info.

cheers
thumbup.gif
*
67k mileage...first time send the car myself..plan to do it tommorow..liqui moly good?but too many type..i rclxub.gif
angrysnail
post May 25 2014, 10:02 PM

SuperStars
******
Senior Member
1,413 posts

Joined: Aug 2009
From: Damansara
QUOTE(TripleJ104 @ May 22 2014, 10:18 AM)
hello...how it is going guys?

Yesterday i loan tool from workshop & i tried my self untighten the spark plug, look not that tight. But tighten it need to be a bit firm. not much..
*



» Click to show Spoiler - click again to hide... «


Not so good,still a lot work to do.Gonna continue again tomorrow. cry.gif
ahpaul82
post May 25 2014, 10:35 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(angrysnail @ May 25 2014, 10:02 PM)
» Click to show Spoiler - click again to hide... «


Not so good,still a lot work to do.Gonna continue again tomorrow. cry.gif
*
Overhaul?

what mileage?

apa hal?


angrysnail
post May 25 2014, 10:41 PM

SuperStars
******
Senior Member
1,413 posts

Joined: Aug 2009
From: Damansara
QUOTE(ahpaul82 @ May 25 2014, 10:35 PM)
Overhaul?

what mileage?

apa hal?
*
Top overhaul only,cam gear screw snapped and lead to valve bend.Need to replace valve,valve seat and lapping.
Btw,this not my car but my customer car.V8 4.8L. biggrin.gif
ahpaul82
post May 27 2014, 08:45 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
Bro angrysnail having workshop? thumbup.gif


beside lowpro had changed his car clutch,

who else change already?

Would like to know the damage... sad.gif

I notice those so call Racing Clutch does not come cheap... sweat.gif

or should just stick with OEM brand Exedy Clutch Kit? hmm.gif
Azuma-kun
post May 27 2014, 10:06 PM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
I changed mine to oem exedy only and now less than a year, slip like shit already hahahaah laugh.gif
ahpaul82
post May 28 2014, 12:03 AM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(Azuma-kun @ May 27 2014, 10:06 PM)
I changed mine to oem exedy only and now less than a year, slip like shit already hahahaah laugh.gif
*
lu driving dahsyat ni... sweat.gif

but what is the cost?
Azuma-kun
post May 28 2014, 12:16 AM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
well, you know me hahahaha i dont know la coz that time change while my engine was broke down. damn nipis already that time.
lowpro
post May 29 2014, 04:20 PM

Getting Started
**
Junior Member
180 posts

Joined: Jan 2009
mine is fine. cost me rm700+ to skim the flywheel and fit the clutch. it is a normal exedy one just that it is a bigger unit as mentioned earlier. no issues even in traffic jam and still light to the foot. benefit is it can take slopes without slowing down much and the power gets transferred to the wheels much better.
Azuma-kun
post May 29 2014, 07:28 PM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
Anyone here using fully adjustable?
ahpaul82
post May 29 2014, 09:00 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(Azuma-kun @ May 28 2014, 12:16 AM)
well, you know me hahahaha i dont know la coz that time change while my engine was broke down. damn nipis already that time.
*
QUOTE(lowpro @ May 29 2014, 04:20 PM)
mine is fine. cost me rm700+ to skim the flywheel and fit the clutch. it is a normal exedy one just that it is a bigger unit as mentioned earlier. no issues even in traffic jam and still light to the foot. benefit is it can take slopes without slowing down much and the power gets transferred to the wheels much better.
*
Thanks bro.

I thought clutch changing RM5xx can settle,

coz the clutch kit macam RM2xx-3xx can get ..

Installation cost RM150-200 kot?

hmm.gif

QUOTE(Azuma-kun @ May 29 2014, 07:28 PM)
Anyone here using fully adjustable?
*
You gatal mao try adjustable liao? whistling.gif
singchaii last time install GAB on his Waja,
stiff till vomit blood.. sweat.gif
but I think he is not in fully adjustable kit lah..
hickups
post May 29 2014, 11:43 PM

Casual
***
Junior Member
477 posts

Joined: Jan 2003
From: Klang
can i know what engine oil u guys use for waja cps?
Azuma-kun
post May 29 2014, 11:54 PM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
QUOTE(ahpaul82 @ May 29 2014, 09:00 PM)
hmm.gif
You gatal mao try adjustable liao?  whistling.gif
singchaii last time install GAB on his Waja,
stiff till vomit blood..  sweat.gif
but I think he is not in fully adjustable kit lah..
*
Preparing for something lalalala whistling.gif

QUOTE(hickups @ May 29 2014, 11:43 PM)
can i know what engine oil u guys use for waja cps?
*
Im using Caltex semi syn. Use Liqui Moly semi, 3rd service something big happened to my engine so yeah. I stick with Caltex after that laugh.gif
hickups
post May 30 2014, 12:42 AM

Casual
***
Junior Member
477 posts

Joined: Jan 2003
From: Klang
just bought a waja cps from used car...dont know need change wat
mADmAN
post May 30 2014, 01:28 AM

10k Club
********
All Stars
10,530 posts

Joined: Nov 2004
From: Petaling Jaya & Mid Valley
QUOTE(Azuma-kun @ May 29 2014, 07:28 PM)
Anyone here using fully adjustable?
*
me me me me me me me me!!! biggrin.gif

QUOTE(ahpaul82 @ May 29 2014, 09:00 PM)
Thanks bro.

I thought clutch changing RM5xx can settle,

coz the clutch kit macam RM2xx-3xx can get ..

Installation cost RM150-200 kot?

hmm.gif
You gatal mao try adjustable liao?  whistling.gif
singchaii last time install GAB on his Waja,
stiff till vomit blood..  sweat.gif
but I think he is not in fully adjustable kit lah..
*
labour charge is around there for clutch change...but dont forget about the cost of gearbox oil oso

oh..n race clutches means stiff pedal....dont bother with them if u cannot tahan n u dun wanna lose ur comfort

GAB keras meh? i think okok only la... good but not too stiff.....i think u sit my car ur entire intestines will come out... HAHAHAHAHA


QUOTE(Azuma-kun @ May 29 2014, 11:54 PM)
Preparing for something lalalala whistling.gif
Im using Caltex semi syn. Use Liqui Moly semi, 3rd service something big happened to my engine so yeah. I stick with Caltex after that laugh.gif
*
preparing untuk apa tuuuuuu?.. whistling.gif

Caltex Semi Syn 10w40 thumbup.gif thumbup.gif thumbup.gif

using it for my B16A oso... hentam track day no problem... recommended to me by Adrian (the guy u met at Uncle K masa kita bromance)

dia pun pakai tu... it was recommended to him by his mechanic (yg 6 years in a row podium MME)...the mech uses it for his MME cars oso.

adrian used it and he said it only burns off very little after a track day... as opposed to the Amsoil he was using previously which burned off quite alot.


QUOTE(hickups @ May 30 2014, 12:42 AM)
just bought a waja cps from used car...dont know need change wat
*
change engine and gearbox oil... also change timing belt so u can keep track of it.

if rajin, do a full brake fluid flush as well.

This post has been edited by mADmAN: May 30 2014, 01:39 AM
Azuma-kun
post May 30 2014, 01:38 AM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
QUOTE(mADmAN @ May 30 2014, 01:28 AM)
me me me me me me me me!!! biggrin.gif
labour charge is around there for clutch change...but dont forget about the cost of gearbox oil oso

GAB keras meh? i think okok only la... good but not too stiff.....i think u sit my car ur entire intestines will come out... HAHAHAHAHA
preparing... whistling.gif

Caltex Semi Syn 10w40 thumbup.gif thumbup.gif thumbup.gif

using it for my B16A oso... hentam track day no problem... recommended to me by Adrian (the guy u met at Uncle K masa kita bromance)

dia pun pakai tu... it was recommended to him by his mechanic (yg 6 years in a row podium MME)...the mech uses it for his MME cars oso.

adrian used it and he said it only burns off very little after a track day... as opposed to the Amsoil he was using previously which burned off quite alot.
change engine and gearbox oil... also change timing belt so u can keep track of it.
*
Yeah that caltex la im using now. No wonder la powerful. Wakakakaaka
lowpro
post May 30 2014, 09:21 AM

Getting Started
**
Junior Member
180 posts

Joined: Jan 2009
just curious, is the front absorber from the Waja interchangeable with the Gen2?
hickups
post May 30 2014, 02:21 PM

Casual
***
Junior Member
477 posts

Joined: Jan 2003
From: Klang
how much does a full brake fluid flush cost?
timing belt and gearbox oil?
TripleJ104
post May 30 2014, 09:14 PM

New Member
*
Junior Member
11 posts

Joined: Jan 2010
QUOTE(Azuma-kun @ May 30 2014, 01:38 AM)
Yeah that caltex la im using now. No wonder la powerful. Wakakakaaka
*
How much is that? I'm use bardhal (bedhal) 5w40 fully syn.

QUOTE(hickups @ May 30 2014, 02:21 PM)
how much does a full brake fluid flush cost?
timing belt and gearbox oil?
*
Brake flush below rm100, timing belt 600-700 & gb oil rm50-60 for manual or auto 150-200.
hickups
post May 31 2014, 12:45 AM

Casual
***
Junior Member
477 posts

Joined: Jan 2003
From: Klang
fuhhh nearly 1k.... rclxub.gif rclxub.gif
ahpaul82
post May 31 2014, 01:57 AM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(Azuma-kun @ May 29 2014, 11:54 PM)
Preparing for something lalalala whistling.gif
Im using Caltex semi syn. Use Liqui Moly semi, 3rd service something big happened to my engine so yeah. I stick with Caltex after that laugh.gif
*
So secret huh? rolleyes.gif

QUOTE(mADmAN @ May 30 2014, 01:28 AM)
labour charge is around there for clutch change...but dont forget about the cost of gearbox oil oso

oh..n race clutches means stiff pedal....dont bother with them if u cannot tahan n u dun wanna lose ur comfort

GAB keras meh? i think okok only la... good but not too stiff.....i think u sit my car ur entire intestines will come out... HAHAHAHAHA
*
oh ya, forgot about the gear oil.

I used to stiff clutch feeling already,

Too light will cause me don't know how to control clutch.. sweat.gif

HAHA,
What is your spring rate?
12k front / 8k rear? tongue.gif
the moment changed to adjustable memang not used to it,
but now almost 3Years (77k-km clocked),
already used to the feeling already,
but one thing for sure is cannot fly bump loh, haha. sweat.gif

QUOTE(lowpro @ May 30 2014, 09:21 AM)
just curious, is the front absorber from the Waja interchangeable with the Gen2?
*
Proton P/N is different between these two cars,

However for adjustable suspension,

Wira/Waja/Gen2 also sharing same one.. rclxub.gif
mADmAN
post May 31 2014, 02:27 AM

10k Club
********
All Stars
10,530 posts

Joined: Nov 2004
From: Petaling Jaya & Mid Valley
QUOTE(ahpaul82 @ May 31 2014, 01:57 AM)
So secret huh?  rolleyes.gif
oh ya, forgot about the gear oil.

I used to stiff clutch feeling already,

Too light will cause me don't know how to control clutch..  sweat.gif 

HAHA,
What is your spring rate?
12k front / 8k rear? tongue.gif
the moment changed to adjustable memang not used to it,
but now almost 3Years (77k-km clocked),
already used to the feeling already,
but one thing for sure is cannot fly bump loh, haha.  sweat.gif
*
if u used to stiff clutch... then yeah...racing clutch syiok.... BUT... if u dont really whack and all that...stock clutch is also fine....



my spring rates quite low... 9kgf/mm....front 5kgf/mm....back (based on tein site, not sure if my set is the same)

i guess the absorber itself is super stiff...


lowpro
post May 31 2014, 09:21 AM

Getting Started
**
Junior Member
180 posts

Joined: Jan 2009
QUOTE(ahpaul82 @ May 31 2014, 01:57 AM)
So secret huh?  rolleyes.gif
oh ya, forgot about the gear oil.

I used to stiff clutch feeling already,

Too light will cause me don't know how to control clutch..  sweat.gif 

HAHA,
What is your spring rate?
12k front / 8k rear? tongue.gif
the moment changed to adjustable memang not used to it,
but now almost 3Years (77k-km clocked),
already used to the feeling already,
but one thing for sure is cannot fly bump loh, haha.  sweat.gif
Proton P/N is different between these two cars,

However for adjustable suspension,

Wira/Waja/Gen2 also sharing same one..  rclxub.gif
*
yup they need different part numbers so that they can monitor which car model needs parts more. it may be the same item but different part number just for tracking purposes and inventory control.

thanks for your feedback. thumbup.gif
ahpaul82
post May 31 2014, 06:40 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(mADmAN @ May 31 2014, 02:27 AM)
if u used to stiff clutch... then yeah...racing clutch syiok.... BUT... if u dont really whack and all that...stock clutch is also fine....
my spring rates quite low... 9kgf/mm....front 5kgf/mm....back (based on tein site, not sure if my set is the same)

i guess the absorber itself is super stiff...
*
Guess that will just stick back stock clutch kit since racing clutch so too expensive already.

FUhhh...
9k/5k... sweat.gif sweat.gif sweat.gif
I can't imagine if your car is for daily drive... laugh.gif

QUOTE(lowpro @ May 31 2014, 09:21 AM)
yup they need different part numbers so that they can monitor which car model needs parts more. it may be the same item but different part number just for tracking purposes and inventory control.

thanks for your feedback.  thumbup.gif
*
You understand my meaning then can liao lah, LOL
becoz previously don't know how to explain in this way tongue.gif
TripleJ104
post May 31 2014, 09:44 PM

New Member
*
Junior Member
11 posts

Joined: Jan 2010
I'm on 6k F & 4K R and it is nice for daily/street driving. For track racing/whacking purpose I think it a bit too soft.

Zuma I think u need to find 6k & 8k combo..but too stiff u will loose contact at uneven road when doing hi speed unless u speeding at Autonbahn la. Maybe that can be corrected by tweaking the soft hard knob I don't know.
hickups
post Jun 1 2014, 03:25 AM

Casual
***
Junior Member
477 posts

Joined: Jan 2003
From: Klang
theres this red light keep blinking beside the hazzard light..happed when i tried too remote lock...it didnt lock but the signal light blinks for 3 secs..and it signal lite keep blinking whenever i try to remote lock my car...weak remote battery?
jctasoga
post Jun 1 2014, 07:09 AM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
hickups : imho, the 3 red blinks means that one of the door or boot or bonnet is unlocked. possibly faulty sensor. try leaving the door opened & fingers at the button sensors to know which one is faulty.

might even be as simple as a loose wire etc...
hickups
post Jun 1 2014, 12:16 PM

Casual
***
Junior Member
477 posts

Joined: Jan 2003
From: Klang
QUOTE(jctasoga @ Jun 1 2014, 07:09 AM)
hickups : imho, the 3 red blinks means that one of the door or boot or bonnet is unlocked. possibly faulty sensor. try leaving the door opened & fingers at the button sensors to know which one is faulty.

might even be as simple as a loose wire etc...
*
Thanks bro..yeah its the bonnet now can lock and unlock again..
jctasoga
post Jun 1 2014, 08:37 PM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
if u have the sound, it should be 3 beeps instead of 1 for locking or arming the alarm.

u should also get the same amount of signal flashes as your beeps. that is unless u disable or silenced the beeping...

so what did you do to fix the problem? adjust sensor at the bonnet?
fazron80
post Jun 2 2014, 12:47 PM

New Member
*
Junior Member
27 posts

Joined: Oct 2007
So long hasnt post here in forum. Proton standard part is what brand of clutch? Exedy? End of last year target to change clutch now 6 months overdue. Now target end of this year. 200K of mileage still on factory fitted clutch. Ask service centre it cost 700 including labour to change clutch. I'm also using caltex engine oil. Best for the money. Always gets past more than 10K mileage but their engine oil still good. Just scared of coming across recycled or imitation caltex. So far still ok.

This post has been edited by fazron80: Jun 2 2014, 12:48 PM
ahpaul82
post Jun 2 2014, 10:25 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
what I got to know from the sparepart list I have is under Aishin brand.

[200 AISHIN] Clutch Disc PW550245 RM185.57

Need to dismantle only can know is Aishin or Exedy brand .. hmm.gif

lowpro changed his Gen2 clutch,

Perhaps he can share?

Or maybe didn't notice what is the stock brand? tongue.gif

hickups
post Jun 3 2014, 01:18 AM

Casual
***
Junior Member
477 posts

Joined: Jan 2003
From: Klang
QUOTE(jctasoga @ Jun 1 2014, 08:37 PM)
if u have the sound, it should be 3 beeps instead of 1 for locking or arming the alarm.

u should also get the same amount of signal flashes as your beeps. that is unless u disable or silenced the beeping...

so what did you do to fix the problem? adjust sensor at the bonnet?
*
tongue.gif i dont know wheres the sensor at the bonnet, but i open and close back and back to normal already..
but today i got another problem..when i turn my steering left or right got some hissing sound...and steering abit shaky when idle but steady when radiator fan spins..i havent check under the hood yet..came back late.

This post has been edited by hickups: Jun 3 2014, 01:21 AM
surefire v LED
post Jun 3 2014, 08:16 AM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
QUOTE(hickups @ Jun 3 2014, 01:18 AM)
tongue.gif i dont know wheres the sensor at the bonnet, but i open and close back and back to normal already..
but today i got another problem..when i turn my steering left or right got some hissing sound...and steering abit shaky when idle but steady when radiator fan spins..i havent check under the hood yet..came back late.
*
i think that steering thingy is normal - mine also hissing sound from day 1 until now almost 100k km oredi biggrin.gif
ajaibman
post Jun 3 2014, 08:35 AM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
Used to have a combination of FGK spring @ 7K rate and Proride Short Stroke (yellow color)...

It drives like a horse, for an MPV quite a shame as MPV should provide comfort for the passengers..

Then the absorber died after 6 month of usage (right just after the warranty period of sapura)..

Then Changed to improved Comfort by EA, its much better but make the car more stiffer than before.. and some clucking sound on the spring..

Now on Standard spring and Improved Comfort absorber, its nice, comfort and just don't whack corner like it use to be (read slowing down on apex), however the looks r OUT.. like an unker delivery van..

Looking for lowered springs that less than 7k rate, any advise?

Heard the GAB spring only 4k?
hickups
post Jun 3 2014, 01:12 PM

Casual
***
Junior Member
477 posts

Joined: Jan 2003
From: Klang
QUOTE(surefire v LED @ Jun 3 2014, 08:16 AM)
i think that steering thingy is normal - mine also hissing sound from day 1 until now almost 100k km oredi  biggrin.gif
*
not pipe bocor or sumting??? before this dont have
surefire v LED
post Jun 3 2014, 01:18 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
QUOTE(hickups @ Jun 3 2014, 01:12 PM)
not pipe bocor or sumting??? before this dont have
*
mine no bocor - confirmed.
lowpro
post Jun 3 2014, 01:53 PM

Getting Started
**
Junior Member
180 posts

Joined: Jan 2009
QUOTE(ahpaul82 @ Jun 2 2014, 10:25 PM)
what I got to know from the sparepart list I have is under Aishin brand.

[200 AISHIN] Clutch Disc PW550245 RM185.57

Need to dismantle only can know is Aishin or Exedy brand ..  hmm.gif

lowpro changed his Gen2 clutch,

Perhaps he can share?

Or maybe didn't notice what is the stock brand? tongue.gif
*
stock no idea! biggrin.gif
sinoffire
post Jun 3 2014, 03:37 PM

Look at all my stars!!
*******
Senior Member
3,557 posts

Joined: Aug 2005
guys, need help:

my 5year old waja, last nite, alarm went off, so tried to off the alarm using my key lar....kenot, it appears as though there's some compartment/doors not closed properly. so i checked car boot, bonet, all 4 doors, all are closed tight. however when i start the enjin inside my car with all doors closed, the "open door" red signal is stil on. the central locking doesn't work anymore. normally the central lock will be activated right after i pressed the break, but this time around, it fails.

so i decided to lock my car using the manual way ie. car key lorrrr. This morning while driving all the way to ofis, the "open car door" signal still showing underneath my car odometer.

the alarm is definitely not working now. can't close the doors using alarm cos it always showed some doors are stil in "Open" state while in actual fact all are tightly closed.

wat's the problem? any solution to this? how much to fix this?
surefire v LED
post Jun 3 2014, 06:45 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
QUOTE(sinoffire @ Jun 3 2014, 03:37 PM)
guys, need help:

my 5year old waja, last nite, alarm went off, so tried to off the alarm using my key lar....kenot, it appears as though there's some compartment/doors not closed properly. so i checked car boot, bonet, all 4 doors, all are closed tight. however when i start the enjin inside my car with all doors closed, the "open door" red signal is stil on. the central locking doesn't work anymore. normally the central lock will be activated right after i pressed the break, but this time around, it fails.

so i decided to lock my car using the manual way ie. car key lorrrr. This morning while driving all the way to ofis, the "open car door" signal still showing underneath my car odometer.

the alarm is definitely not working now. can't close the doors using alarm cos it always showed some doors are stil in "Open" state while in actual fact all are tightly closed.

wat's the problem? any solution to this? how much to fix this?
*
I had this b4 almost 5 years ago - it was my front left door - went SC they fixed it for me.
sinoffire
post Jun 3 2014, 08:38 PM

Look at all my stars!!
*******
Senior Member
3,557 posts

Joined: Aug 2005
QUOTE(surefire v LED @ Jun 3 2014, 06:45 PM)
I had this b4 almost 5 years ago - it was my front left door - went SC they fixed it for me.
*
thanks for reply dude. finally know the reason behind.
some bastet hit N run my car, left a dent on my left-hand side door, causing the sensor to move outta position. went to accessory shop to put a small sponge to make the sensor + alarm work like normal. will find time to some body repair shop and deal wif it.

urgh... mad.gif vmad.gif mad.gif vmad.gif
surefire v LED
post Jun 3 2014, 08:55 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
QUOTE(sinoffire @ Jun 3 2014, 08:38 PM)
thanks for reply dude. finally know the reason behind.
some bastet hit N run my car, left a dent on my left-hand side door, causing the sensor to move outta position. went to accessory shop to put a small sponge to make the sensor + alarm work like normal. will find time to some body repair shop and deal wif it.

urgh...  mad.gif  vmad.gif  mad.gif  vmad.gif
*
Sori 2 hear that - maybe if the budget permit need to install hidden camera like those key chain type.
ahpaul82
post Jun 3 2014, 09:15 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(TripleJ104 @ May 31 2014, 09:44 PM)
I'm on 6k F & 4K R and it is nice for daily/street driving. For track racing/whacking purpose I think it a bit too soft.

Zuma I think u need to find 6k & 8k combo..but too stiff u will loose contact at uneven road when doing hi speed unless u speeding at Autonbahn la. Maybe that can be corrected by tweaking the soft hard knob I don't know.
*
Oh Yeah,

Forgot you are on AR Racing HLSH Adjustable too ~ thumbup.gif


QUOTE(ajaibman @ Jun 3 2014, 08:35 AM)
Used to have a combination of FGK spring @ 7K rate and Proride Short Stroke (yellow color)...

It drives like a horse, for an MPV quite  a shame as MPV should provide comfort for the passengers..

Then the absorber died after 6 month of usage (right just after the warranty period of sapura)..

Then Changed to improved Comfort by EA, its much better but make the car more stiffer than before.. and some clucking sound on the spring..

Now on Standard spring and Improved Comfort absorber, its nice, comfort and just don't whack corner like it use to be (read slowing down on apex), however the looks r OUT.. like an unker delivery van..

Looking for lowered springs that less than 7k rate, any advise?

Heard the GAB spring only 4k?
*
Family MPV too stiff really sweat.gif sweat.gif sweat.gif

You can choose the spring rate.
eastwest
post Jun 5 2014, 10:57 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
I'm back!!!

QUOTE(hickups @ May 29 2014, 11:43 PM)
can i know what engine oil u guys use for waja cps?
*
syntium 3000 biggrin.gif

ajaibman
post Jun 5 2014, 05:30 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(ahpaul82 @ Jun 3 2014, 09:15 PM)

You can choose the spring rate.
*
Bro, any advice for the softer lowered spring brand? GAB only has 1 set for Exora ..

ahpaul82
post Jun 5 2014, 06:15 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(ajaibman @ Jun 5 2014, 05:30 PM)
Bro, any advice for the softer lowered spring brand? GAB only has 1 set for Exora ..
*
As far as I know the lowest spring rate you can get is start from 4k..
stock Gen2 CPS spring rate is around 2k+ only,
I believe Exora spring rate should be higher due to heavy weight.
When my car 4peoples (including driver) onboard,
I can feel that my rear side become softer..
Maybe after 3years+ used or rear adjustable need to service kot.. ?
But if only me driving, I feel rear side just taste nice.

Got consider about adjustable since you already try few combination of suspension? biggrin.gif

This post has been edited by ahpaul82: Jun 5 2014, 06:18 PM
lowpro
post Jun 6 2014, 12:11 AM

Getting Started
**
Junior Member
180 posts

Joined: Jan 2009
QUOTE(ahpaul82 @ Jun 5 2014, 06:15 PM)
As far as I know the lowest spring rate you can get is start from 4k..
stock Gen2 CPS spring rate is around 2k+ only,
I believe Exora spring rate should be higher due to heavy weight.
When my car 4peoples (including driver) onboard,
I can feel that my rear side become softer..
Maybe after 3years+ used or rear adjustable need to service kot..  ?
But if only me driving, I feel rear side just taste nice.

Got consider about adjustable since you already try few combination of suspension?  biggrin.gif
*
thinking of changing back to standard springs lah. these r3 springs are too stiff for me... or maybe i'm getting old.
fazron80
post Jun 6 2014, 10:32 AM

New Member
*
Junior Member
27 posts

Joined: Oct 2007
QUOTE(lowpro @ Jun 6 2014, 12:11 AM)
thinking of changing back to standard springs lah. these r3 springs are too stiff for me... or maybe i'm getting old.
*
I used r3 spring one day only. My back not made for that stiffness. But those who likes lowered look r3 spring is perfect. One finger only the distance.
ahpaul82
post Jun 6 2014, 11:34 AM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(lowpro @ Jun 6 2014, 12:11 AM)
thinking of changing back to standard springs lah. these r3 springs are too stiff for me... or maybe i'm getting old.
*
QUOTE(fazron80 @ Jun 6 2014, 10:32 AM)
I used r3 spring one day only. My back not made for that stiffness. But those who likes lowered look r3 spring is perfect. One finger only the distance.
*
R3 spring so stiff meh?
Pair with stock absorber?

If you have it right now you can roughly calculate what is the spring rate..

Guess that we should TT and exchange car test drive and share experience again. biggrin.gif
fazron80
post Jun 6 2014, 11:47 AM

New Member
*
Junior Member
27 posts

Joined: Oct 2007
Yup pair with standard kayaba/apm absorber. dunno what the rate. But stifffer than stock. Some people might be ok. Next day immediately buy new stock spring. But main reason I sold was the gap to small. 1 finger without passengers. Not for me that lowered look.
lowpro
post Jun 6 2014, 01:38 PM

Getting Started
**
Junior Member
180 posts

Joined: Jan 2009
QUOTE(fazron80 @ Jun 6 2014, 10:32 AM)
I used r3 spring one day only. My back not made for that stiffness. But those who likes lowered look r3 spring is perfect. One finger only the distance.
*
yes, exactly one finger! rclxub.gif got a set of new sapura shocks. hope those improve the ride.

This post has been edited by lowpro: Jun 6 2014, 01:43 PM
ahpaul82
post Jun 6 2014, 03:33 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
One finger gap? R3 spring so low kah?
So low front bumper lower lips sure scratches gao gao loh?

I set 2 fingers height (front / back ) on my adjustable also scratch till bumper mao jatuh liao...

I can't imagine one finger height..
LoneWolfTNT
post Jun 8 2014, 05:49 AM

AKermit
******
Senior Member
1,346 posts

Joined: Jan 2003
From: Downtown
hei guys help me pelisssss! my exora cps kluk kluk sound (front)still there after (change lower arm bus,change suspension/absober n mount, change satay) this sound come out when you drive on uneven/lopak2 or bumpie road! any idea? suda mau sewel ni !! dafrog la! tomolo mau pegi proton SC pulak! here go my moneh! sad.gif FB sunyi aja! landlord suda x peduli ka hahahahahah sweat.gif sweat.gif sweat.gif


This post has been edited by LoneWolfTNT: Jun 8 2014, 05:50 AM
eastwest
post Jun 9 2014, 09:30 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(LoneWolfTNT @ Jun 8 2014, 05:49 AM)
hei guys help me pelisssss! my exora cps kluk kluk sound (front)still there after (change lower arm bus,change suspension/absober n mount, change satay) this sound come out when you drive on uneven/lopak2 or bumpie road! any idea? suda mau sewel ni !! dafrog la! tomolo mau pegi proton SC pulak! here go my moneh! sad.gif  FB sunyi aja! landlord suda x peduli ka hahahahahah sweat.gif  sweat.gif  sweat.gif
*
No idea bro sad.gif
jctasoga
post Jun 9 2014, 10:01 AM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
i believe its the suspension top mount loose. mine only happens when turning on uneven roads. when straight & uneven, no problems. i replaced it once and the sound was gone.. then come back a few weeks later... endup dun wan to replace liao.. too expensive..

another thing is i drive waja and the 3 points strut bar i believe contributes to the top mount KO earlier than normal.
ahpaul82
post Jun 9 2014, 10:37 AM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
LoneWolfTNT,
Your front suspension system seems all parts replaced still having weird noise?
Try check subframe bolt & nut too, ask them tighten it.

Bro jctasoga,
I guess my car having klok klok sound also,
Suspect is the absorber top mount too,
How much you got it replaced?
jctasoga
post Jun 9 2014, 12:10 PM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
ahpaul : rm300 both sides. its non-ori... that was 2 years ago. another tell tale sign is that when you go over high bridges, u will hear a knocking sound. that is when your whole top mount rubber is gone case ie loose or no rubber... so steel to steel knocking sounds.....
eastwest
post Jun 9 2014, 01:22 PM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(jctasoga @ Jun 9 2014, 12:10 PM)
ahpaul : rm300 both sides. its non-ori... that was 2 years ago. another tell tale sign is that when you go over high bridges, u will hear a knocking sound. that is when your whole top mount rubber is gone case ie loose or no rubber... so steel to steel knocking sounds.....
*
which part exactly? sweat.gif
jctasoga
post Jun 9 2014, 01:45 PM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
QUOTE(eastwest @ Jun 9 2014, 01:22 PM)
which part exactly? sweat.gif
*
the gold part... smile.gif

» Click to show Spoiler - click again to hide... «
ahpaul82
post Jun 9 2014, 02:30 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(jctasoga @ Jun 9 2014, 12:10 PM)
ahpaul : rm300 both sides. its non-ori... that was 2 years ago. another tell tale sign is that when you go over high bridges, u will hear a knocking sound. that is when your whole top mount rubber is gone case ie loose or no rubber... so steel to steel knocking sounds.....
*
Fuhhhh,
So expensive meh?
I remember is < RM100 per side,
(last time help my friend bought it)

I decided to change within these few months..
Will do it together when change another two tires..
Since absorber need to dismantle,
I also wish to service my adjustable..
Clutch also giving weird sound when engaged clutch during stop ..

Fuhhhh..
Maintenaning car is expensive than change car.. tongue.gif
Let's see how things goes..
eastwest
post Jun 9 2014, 02:44 PM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(jctasoga @ Jun 9 2014, 01:45 PM)
the gold part... smile.gif

» Click to show Spoiler - click again to hide... «

*
Thanks. do we need to take it out first only then can see that part?
surefire v LED
post Jun 9 2014, 09:15 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
QUOTE(eastwest @ Jun 9 2014, 02:44 PM)
Thanks. do we need to take it out first only then can see that part?
*
Aku punya waja pun ada munyi - haram betul !!
jctasoga
post Jun 10 2014, 07:55 AM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
eastwest : no need take out. ur mechanic can jack up the car. if u see the top mount (centre round shape thingy) moving up and down, it means its dead already...

ahpaul : maybe i kena chop lo... coz its a tyre shop. i was doing alignment when they mentioned that the mounting was dead so replaced it one shot. he say 1 side or 2 sides... i was a bit blurr to say "not come in 1 pair meh?!" so in conclusion, can save cost by buying 1 side only... then again if 1 side already dead, the other side will not be there for too long either...
raclette
post Jun 10 2014, 08:09 AM

Casual
***
Junior Member
428 posts

Joined: Aug 2009
in my case, just remove the black triangle-esqu cover. can see the stud bolt inclined i.e. not centered.and the metal support is damaged.
TripleJ104
post Jun 10 2014, 12:02 PM

New Member
*
Junior Member
11 posts

Joined: Jan 2010
Last 2 month I invest in stiff ring..so far things felt great. It rectify my pulling to the left steering issue. Factory fitted subframe to chassis is bad, ohmy proton..why u do this??. Now the setting is perfect, hiway cruising is more relaxing.

Handling department become better too, feel like I can full utilize my car handling. Steering is more & more precise, changing lane in hi speed? Even @ 160kmj is nothing now.

If u guys can invest in stiff ring, I recommend so, in my case my subframe is miss align so by adding this, it repairs my problem so I felt it was great. Money well spend I could say. How on earth I don't invest in this earlier.

Bro Ah paul, maintaining a car yes, it could be pain in the arse. But having a healty & reliable car is something else. Also fast some more...huhuhu.
jctasoga
post Jun 10 2014, 12:13 PM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
care to share the cost or pm here and contacts if available smile.gif
R.Y.D.E.C.K
post Jun 10 2014, 01:43 PM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(TripleJ104 @ Jun 10 2014, 12:02 PM)
Last 2 month I invest in stiff ring..so far things felt great. It rectify my pulling to the left steering issue. Factory fitted subframe to chassis is bad, ohmy proton..why u do this??. Now the setting is perfect, hiway cruising is more relaxing.

Handling department become better too, feel like I can full utilize my car handling. Steering is more & more precise, changing lane in hi speed? Even @ 160kmj is nothing now.

If u guys can invest in stiff ring, I recommend so, in my case my subframe is miss align so by adding this, it repairs my problem so I felt it was great. Money well spend I could say. How on earth I don't invest in this earlier.

Bro Ah paul, maintaining a car yes, it could be pain in the arse. But having a healty & reliable car is something else. Also fast some more...huhuhu.
*
told u dy..not a placebo effect.... laugh.gif laugh.gif
TripleJ104
post Jun 10 2014, 04:13 PM

New Member
*
Junior Member
11 posts

Joined: Jan 2010
QUOTE(jctasoga @ Jun 10 2014, 12:13 PM)
care to share the cost or pm here and contacts if available smile.gif
*
About stiff ring? Can google speedmod. They are authorize dealer & I bought the stiff ring at promo price. Can email them for pricing.

QUOTE(R.Y.D.E.C.K @ Jun 10 2014, 01:43 PM)
told u dy..not a placebo effect.... laugh.gif  laugh.gif
*
Huhuhu...that time no approval from ministry of finance. Add the stiff ring like adding xtra mayo in your burger.

jctasoga
post Jun 10 2014, 04:34 PM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
actually just did. 2x our road tax price eh... sounds not too shabby... urs is 8 rings? installed by your own mech or need to install at their outlet? also got the diagram which bolt to unplug etc?
TripleJ104
post Jun 10 2014, 08:47 PM

New Member
*
Junior Member
11 posts

Joined: Jan 2010
QUOTE(jctasoga @ Jun 10 2014, 04:34 PM)
actually just did. 2x our road tax price eh... sounds not too shabby... urs is 8 rings? installed by your own mech or need to install at their outlet? also got the diagram which bolt to unplug etc?
*
Yes2...I don't want to post the price coz got friends here selling them.

Gyeah 8 rings. I install them at one of the dealer in jb. It got diagram but better fix it at the dealers coz the ring could be damage not install properly. After install need to do alignment..labour I pay rm50.
ahpaul82
post Jun 10 2014, 10:34 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(jctasoga @ Jun 10 2014, 07:55 AM)
eastwest : no need take out. ur mechanic can jack up the car. if u see the top mount (centre round shape thingy) moving up and down, it means its dead already...

ahpaul : maybe i kena chop lo... coz its a tyre shop. i was doing alignment when they mentioned that the mounting was dead so replaced it one shot. he say 1 side or 2 sides... i was a bit blurr to say "not come in 1 pair meh?!" so in conclusion, can save cost by buying 1 side only... then again if 1 side already dead, the other side will not be there for too long either...
*
I will change both if I were you..

the extra $$$ consider experience loh tongue.gif

QUOTE(raclette @ Jun 10 2014, 08:09 AM)
in my case, just remove the black triangle-esqu cover. can see the stud bolt inclined i.e. not centered.and the metal support is damaged.
*
I always wonder how it's look like if the front absorber mounting rosak .. hmm.gif

You got photo show show?

QUOTE(TripleJ104 @ Jun 10 2014, 12:02 PM)
Last 2 month I invest in stiff ring..so far things felt great. It rectify my pulling to the left steering issue. Factory fitted subframe to chassis is bad, ohmy proton..why u do this??. Now the setting is perfect, hiway cruising is more relaxing.

Handling department become better too, feel like I can full utilize my car handling. Steering is more & more precise, changing lane in hi speed? Even @ 160kmj is nothing now.

If u guys can invest in stiff ring, I recommend so, in my case my subframe is miss align so by adding this, it repairs my problem so I felt it was great. Money well spend I could say. How on earth I don't invest in this earlier.

Bro Ah paul, maintaining a car yes, it could be pain in the arse. But having a healty & reliable car is something else. Also fast some more...huhuhu.
*
hmmm... will consider about it ~

since that price = 2TB HDD tongue.gif
LoneWolfTNT
post Jun 11 2014, 01:16 AM

AKermit
******
Senior Member
1,346 posts

Joined: Jan 2003
From: Downtown
hahaha funny man! even proton SC also dont know whats happen to my car! after they check they said all part fine. no lose no miss align or whats so ever. go to normal bengkel ask them to tighten all the screw or whats ever down there ... yet those kluk klak kluk klak wont go away completely.still got small kluk2 sound! demmit! well maybe i need Stiff Ring too like Triplej104 do!
Azuma-kun
post Jun 11 2014, 01:30 AM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
What car u driving? Are u in KL?
LoneWolfTNT
post Jun 11 2014, 03:26 AM

AKermit
******
Senior Member
1,346 posts

Joined: Jan 2003
From: Downtown
Exora CPS ! im in Melawati KL ! smile.gif
Azuma-kun
post Jun 11 2014, 04:29 AM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
Exora sweat.gif so i dont want to try
Summon singchaii

He's workshop is somewhere near Setapak. Dafuq I forgot the place hahahaha
carrera_gt
post Jun 11 2014, 04:53 AM

New Member
*
Newbie
0 posts

Joined: Nov 2009
QUOTE(TripleJ104 @ Jun 10 2014, 12:02 PM)
Last 2 month I invest in stiff ring..so far things felt great. It rectify my pulling to the left steering issue. Factory fitted subframe to chassis is bad, ohmy proton..why u do this??. Now the setting is perfect, hiway cruising is more relaxing.

Handling department become better too, feel like I can full utilize my car handling. Steering is more & more precise, changing lane in hi speed? Even @ 160kmj is nothing now.

If u guys can invest in stiff ring, I recommend so, in my case my subframe is miss align so by adding this, it repairs my problem so I felt it was great. Money well spend I could say. How on earth I don't invest in this earlier.

Bro Ah paul, maintaining a car yes, it could be pain in the arse. But having a healty & reliable car is something else. Also fast some more...huhuhu.
*
Nice mod...will consider it..

my car got left steering pulled issue too..
mutt
post Jun 11 2014, 06:25 PM

please pronounce my nick as 'mood/mut' not 'mud/mat
******
Senior Member
1,288 posts

Joined: Jul 2007
From: Shah Alam
.
R.Y.D.E.C.K
post Jun 11 2014, 06:58 PM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(Azuma-kun @ Jun 11 2014, 04:29 AM)
Exora sweat.gif so i dont want to try
Summon singchaii

He's workshop is somewhere near Setapak. Dafuq I forgot the place hahahaha
*
taman sri rampey lah doh.gif
lowpro
post Jun 11 2014, 07:53 PM

Getting Started
**
Junior Member
180 posts

Joined: Jan 2009
QUOTE(TripleJ104 @ Jun 10 2014, 12:02 PM)
Last 2 month I invest in stiff ring..so far things felt great. It rectify my pulling to the left steering issue. Factory fitted subframe to chassis is bad, ohmy proton..why u do this??. Now the setting is perfect, hiway cruising is more relaxing.

Handling department become better too, feel like I can full utilize my car handling. Steering is more & more precise, changing lane in hi speed? Even @ 160kmj is nothing now.

If u guys can invest in stiff ring, I recommend so, in my case my subframe is miss align so by adding this, it repairs my problem so I felt it was great. Money well spend I could say. How on earth I don't invest in this earlier.

Bro Ah paul, maintaining a car yes, it could be pain in the arse. But having a healty & reliable car is something else. Also fast some more...huhuhu.
*
ok, next mod then! thumbup.gif
LoneWolfTNT
post Jun 11 2014, 10:06 PM

AKermit
******
Senior Member
1,346 posts

Joined: Jan 2003
From: Downtown
QUOTE(Azuma-kun @ Jun 11 2014, 04:29 AM)
Exora sweat.gif so i dont want to try
Summon singchaii

He's workshop is somewhere near Setapak. Dafuq I forgot the place hahahaha
*
owh ok i go pay him a visit someday! apa nama kedai ? singchaii

QUOTE(R.Y.D.E.C.K @ Jun 11 2014, 06:58 PM)
taman sri rampey lah  doh.gif
*
lol... seri rampey eh! near mah place tu! tongue.gif

btw Azuma-kun you own workshop too?? somewhere?? smile.gif


This post has been edited by LoneWolfTNT: Jun 11 2014, 10:07 PM
Azuma-kun
post Jun 11 2014, 10:11 PM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
If I own a workshop, my car supercharged ady laugh.gif
TripleJ104
post Jun 11 2014, 10:24 PM

New Member
*
Junior Member
11 posts

Joined: Jan 2010
Woahhh...looks like my poison is working hahaha.

LoneWolfTNT, its always like that. I'm owning a second proton I still didn't find a good proton SC. Owning a proton u need to able self diagnostic the problem at your car. Need to ask around. But it is good also, can get to know your car better thus lead a better driver.
mutt
post Jun 12 2014, 08:00 AM

please pronounce my nick as 'mood/mut' not 'mud/mat
******
Senior Member
1,288 posts

Joined: Jul 2007
From: Shah Alam
QUOTE(LoneWolfTNT @ Jun 11 2014, 10:06 PM)
owh ok i go pay him a visit someday! apa nama kedai ? singchaii
lol... seri rampey eh! near mah place tu! tongue.gif

btw Azuma-kun you own workshop too?? somewhere??  smile.gif
*
workshop tamiya
location : home
ajaibman
post Jun 13 2014, 10:44 AM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(LoneWolfTNT @ Jun 11 2014, 01:16 AM)
hahaha funny man! even proton SC also dont know whats happen to my car! after they check they said all part fine. no lose no miss align or whats so ever. go to normal bengkel ask them to tighten all the screw or whats ever down there ... yet those kluk klak kluk klak wont go away completely.still got small kluk2 sound! demmit! well maybe i need Stiff Ring too like Triplej104 do!
*
Try to disassemble all the absorber, and re-assemble it again, I once had that problem, when changing the absorber with spring, the sound magically disappear.
ajaibman
post Jun 13 2014, 10:48 AM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(TripleJ104 @ Jun 11 2014, 10:24 PM)
Woahhh...looks like my poison is working hahaha.

LoneWolfTNT, its always like that. I'm owning a second proton I still didn't find a good proton SC. Owning a proton u need to able self diagnostic the problem at your car. Need to ask around. But it is good also, can get to know your car better thus lead a better driver.
*
All Proton SC are bullshits, but if your car still under warranty no choice, what you need to do is build relationships with the Service Advisor, but still you have to guide him to pin point what the actual problem (self Diagnose) as their mechanic diagnose skill are only Text book from Proton deep.


My exora already passes the warranty period, now going to 3rd party workshop who understand Campro engine more than those mangkuk SC even as grand as COE Kesas.
Azuma-kun
post Jun 13 2014, 11:09 AM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
Okay! TT SolGaden (yang scam) datang lagi! This time for real! Suggest date, lokasi SolGaden, time. To get as many as we can to attend, I strongly suggest do it by end of month. What say you?

Crime Scene:
Tarikh Pembunuhan:
Masa mangsa dibunuh:
R.Y.D.E.C.K
post Jun 13 2014, 11:53 AM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(Azuma-kun @ Jun 13 2014, 11:09 AM)
Okay! TT SolGaden (yang scam) datang lagi! This time for real! Suggest date, lokasi SolGaden, time. To get as many as we can to attend, I strongly suggest do it by end of month. What say you?

Crime Scene:
Tarikh Pembunuhan:
Masa mangsa dibunuh:
*
f̶u̶c̶t̶ ̶s̶o̶l̶g̶a̶r̶d̶e̶n̶!̶ cool2.gif
jctasoga
post Jun 13 2014, 02:32 PM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
is this a TT? wats solgaden?
LoneWolfTNT
post Jun 13 2014, 02:33 PM

AKermit
******
Senior Member
1,346 posts

Joined: Jan 2003
From: Downtown
QUOTE(ajaibman @ Jun 13 2014, 10:48 AM)
All Proton SC are bullshits, but if your car still under warranty no choice, what you need to do is build relationships with the Service Advisor, but still you have to guide him to pin point what the actual problem (self Diagnose) as their mechanic diagnose skill are only Text book from Proton deep.
My exora already passes the warranty period, now going to 3rd party workshop who understand Campro engine more than those mangkuk SC even as grand as COE Kesas.
*
same la sudah out of warranty ler! i normally go to Zordaq Shah Alam dat take me 1 hours to reach there if no jam cry.gif already take out reassemble shox and everything go do chamber adjustment and computer aligment .... still no luck for me ... now pokai sudah dem...! shakehead.gif ajaibman lokasi dkat mana mau jumpa sama u nak minta jampi serampah atau tips sikit lol
Azuma-kun
post Jun 13 2014, 03:11 PM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
QUOTE(jctasoga @ Jun 13 2014, 02:32 PM)
is this a TT? wats solgaden?
*
Yeah...I suggest we do tit on 28/29 this month. It's Seoul Garden sweat.gif
ajaibman
post Jun 13 2014, 03:15 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(LoneWolfTNT @ Jun 13 2014, 02:33 PM)
same la sudah out of warranty ler! i normally go to Zordaq Shah Alam dat take me 1 hours to reach there if no jam cry.gif  already take out reassemble shox and everything go do chamber adjustment and computer aligment .... still no luck for me ... now pokai sudah dem...!  shakehead.gif  ajaibman lokasi dkat mana mau jumpa sama u nak minta jampi serampah atau tips sikit lol
*
My area is Old Klang Road.. my newly found workshop (which always pushes me participate in their SNF event in Sepang) is in PJ PJS2 area.


LoneWolfTNT
post Jun 13 2014, 03:51 PM

AKermit
******
Senior Member
1,346 posts

Joined: Jan 2003
From: Downtown
QUOTE(ajaibman @ Jun 13 2014, 03:15 PM)
My area is Old Klang Road.. my newly found workshop (which always pushes me participate in their SNF event in Sepang) is in PJ PJS2 area.
*
owh i see ! last nite go do camber/aligment at 1 bengkel near OUG there! dat workshop opposite carwash T junction there!
kena RM 80 ! ok ka dat price? hahahaha! smile.gif ! (while go to gasing indah area)

wut the bengkel name ar in dat pj2?
jctasoga
post Jun 13 2014, 04:27 PM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
QUOTE(Azuma-kun @ Jun 13 2014, 03:11 PM)
Yeah...I suggest we do tit on 28/29 this month. It's Seoul Garden sweat.gif
*
sorry budak BP tongue.gif
ahpaul82
post Jun 13 2014, 04:36 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(Azuma-kun @ Jun 13 2014, 11:09 AM)
Okay! TT SolGaden (yang scam) datang lagi! This time for real! Suggest date, lokasi SolGaden, time. To get as many as we can to attend, I strongly suggest do it by end of month. What say you?

Crime Scene:
Tarikh Pembunuhan:
Masa mangsa dibunuh:
*
I confirm can attend as I'm jailbreak 3weeks. whistling.gif
ahpaul82
post Jun 13 2014, 04:37 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(jctasoga @ Jun 13 2014, 04:27 PM)
sorry budak BP tongue.gif
*
Drive up loh.. tongue.gif
jctasoga
post Jun 13 2014, 05:14 PM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
i can give you all sort of reason for not showing up but i'll still say that i'm tied up for those nights. customer here for the weekend... tongue.gif
Azuma-kun
post Jun 13 2014, 05:40 PM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
QUOTE(ahpaul82 @ Jun 13 2014, 04:36 PM)
I confirm can attend as I'm jailbreak 3weeks.  whistling.gif
*
Nice! Rindu sama u ady laugh.gif
Azuma-kun
post Jun 13 2014, 05:41 PM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
My suggestion, do it on 28th since 29th already puasa. So why not, the last day before puasa. If not, have to wait for at least a month after that.
ajaibman
post Jun 13 2014, 07:39 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
Will attend test drive session of the new GSC soon, stay tuned..

sadly this time will be in Tg Malim.. huhuuh..
marzuk88
post Jun 13 2014, 10:28 PM

New Member
*
Newbie
0 posts

Joined: Jul 2012
QUOTE(jctasoga @ Jun 13 2014, 04:27 PM)
sorry budak BP tongue.gif
*
BP ? which part ?
ahpaul82
post Jun 14 2014, 12:52 AM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(Azuma-kun @ Jun 13 2014, 05:40 PM)
Nice! Rindu sama u ady laugh.gif
*
wub.gif wub.gif wub.gif
ahpaul82
post Jun 14 2014, 01:18 AM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
Anyone know what cause relay rosak?

I having issue on my both sides fog lamp suddenly turn off,

checked fuse box, realized fog lamp fuse broken,

changed new one, Key on and try see the fog lamp on or not,

mana tao same, fog lamp switch show turn on already but no light output.. rclxub.gif

plug out the fuse noticed it broken again... shocking.gif

the only guess is fog lamp relay issue?
Max
post Jun 14 2014, 10:46 PM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
QUOTE(ahpaul82 @ Jun 14 2014, 01:18 AM)
Anyone know what cause relay rosak?

I having issue on my both sides fog lamp suddenly turn off,

checked fuse box, realized fog lamp fuse broken,

changed new one, Key on and try see the fog lamp on or not,

mana tao same, fog lamp switch show turn on already but no light output..  rclxub.gif

plug out the fuse noticed it broken again...  shocking.gif

the only guess is fog lamp relay issue?
*
check the bulb socket 1st.
try remove the bulb and switch on.. see if fuse blown or not.
fazron80
post Jun 15 2014, 12:03 AM

New Member
*
Junior Member
27 posts

Joined: Oct 2007
My fog lamp pecah for 2 years edy. Waiting for the other to pecah but very stubborn.
CAK and stiff ring what the difference. I know amount of rings is different. But both for same purpose. If not for EA having CAK only I'd go straight for stiff ring.
jctasoga
post Jun 15 2014, 09:14 PM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
QUOTE(marzuk88 @ Jun 13 2014, 10:28 PM)
BP ? which part ?
*
city boy tongue.gif batu pahat in johor. near to sphiroth
jctasoga
post Jun 15 2014, 09:17 PM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
QUOTE(ahpaul82 @ Jun 14 2014, 01:18 AM)
Anyone know what cause relay rosak?

I having issue on my both sides fog lamp suddenly turn off,

checked fuse box, realized fog lamp fuse broken,

changed new one, Key on and try see the fog lamp on or not,

mana tao same, fog lamp switch show turn on already but no light output..  rclxub.gif

plug out the fuse noticed it broken again...  shocking.gif

the only guess is fog lamp relay issue?
*
better get it checked by mech or wireman. relays usually hard to spoil unless overvoltage or short circuit.
greddy
post Jun 15 2014, 09:22 PM

Getting Started
**
Junior Member
164 posts

Joined: Jan 2003
From: Klang
Hi guys

Anyone has stock crank pulley for CPS engine lying around? Those who upgraded to LCP... Wanting to let go stock crank pulley? Do let me know... Thx
eastwest
post Jun 16 2014, 09:34 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(ajaibman @ Jun 13 2014, 07:39 PM)
Will attend test drive session of the new GSC soon, stay tuned..

sadly this time will be in Tg Malim.. huhuuh..
*
golden screen cinemex? hahaha

This post has been edited by eastwest: Jun 16 2014, 09:34 AM
ahpaul82
post Jun 16 2014, 11:33 AM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(Max @ Jun 14 2014, 10:46 PM)
check the bulb socket 1st.
try remove the bulb and switch on.. see if fuse blown or not.
*
QUOTE(jctasoga @ Jun 15 2014, 09:17 PM)
better get it checked by mech or wireman. relays usually hard to spoil unless overvoltage or short circuit.
*
Just went to Proton Service Center outside my house,
They use some tools to test both bulb sockets, fuse socket, switch the left / right bulbs, switch the relay,
Voila, my fog lamps turn on again.
They only charge me one unit fuse price, RM1. thumbup.gif
But they did informed left side bulb socket one of wire in no good condition already, wire exposed and it seems will broke anytime.
It could be cause fuse blown..
Temporary use first loh, wait till no light again only see what should do.

jctasoga
post Jun 16 2014, 11:47 AM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
wire expose can glue back? maybe water contact then short circuit lo. caution my fren..
ahpaul82
post Jun 16 2014, 11:51 AM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(jctasoga @ Jun 16 2014, 11:47 AM)
wire expose can glue back? maybe water contact then short circuit lo. caution my fren..
*
I think they didn't cover it, I didn't pay much attention on what they do, I know the feeling of pressure, LOL

Ya, will consider to change the left side whole bulb since glass already pecah long time ago, LOL
eastwest
post Jun 16 2014, 11:58 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
my car rear seat is a bit loose now, so there will be a rattling sound when driving... tapi bila tekan kerusi tu, bunyi takde... tengah fikir nak letak span ke apa....
ahpaul82
post Jun 16 2014, 11:59 AM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(greddy @ Jun 15 2014, 09:22 PM)
Hi guys

Anyone has stock crank pulley for CPS engine lying around? Those who upgraded to LCP... Wanting to let go stock crank pulley? Do let me know... Thx
*
Why need it?
You changed aftermarket but didn't keep original crank pulley?
New one cost RM 2xx from spare part shops.
ahpaul82
post Jun 16 2014, 12:03 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(eastwest @ Jun 16 2014, 11:58 AM)
my car rear seat is a bit loose now, so there will be a rattling sound when driving... tapi bila tekan kerusi tu, bunyi takde... tengah fikir nak letak span ke apa....
*
Sometimes I also cannot stand those rattling sound,
Expecially those sound Is from dashboard..
Your case try to put sponge or see which part cause rattling and tighten it loh. Should be small issue.

Anyone servicing air-conditioning before?
Expecially cooling coil?
Need remove dashboard?
ahpaul82
post Jun 16 2014, 12:03 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
Double Post.


This post has been edited by ahpaul82: Jun 16 2014, 12:04 PM
greddy
post Jun 16 2014, 02:08 PM

Getting Started
**
Junior Member
164 posts

Joined: Jan 2003
From: Klang
QUOTE(ahpaul82 @ Jun 16 2014, 11:59 AM)
Why need it?
You changed aftermarket but didn't keep original crank pulley?
New one cost RM 2xx from spare part shops.
*
My stock crank pulley damaged. Somehow the bolt loosened, guess vibration, the hole now enlarged. Thought wanna go for aftermarket pulley but was quoted 700 for the mythelogy lcp with dampener shocking.gif. Other brands no dampener.

Anyway anyone knows how to properly tighten the crank pulley? When tightening the crank rotates hmm.gif .
surefire v LED
post Jun 16 2014, 02:11 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
QUOTE(ahpaul82 @ Jun 16 2014, 12:03 PM)
Sometimes I also cannot stand those rattling sound,
Expecially those sound Is from dashboard..
Your case try to put sponge or see which part cause rattling and tighten it loh. Should be small issue.

Anyone servicing air-conditioning before?
Expecially cooling coil?
Need remove dashboard?
*
Mine gonna be 5 years in September never service the air conditioning yet.
angrysnail
post Jun 16 2014, 04:49 PM

SuperStars
******
Senior Member
1,413 posts

Joined: Aug 2009
From: Damansara
QUOTE(greddy @ Jun 16 2014, 02:08 PM)
My stock crank pulley damaged. Somehow the bolt loosened, guess vibration, the hole now enlarged. Thought wanna go for aftermarket pulley but was quoted 700 for the mythelogy lcp with dampener  shocking.gif. Other brands no dampener.

Anyway anyone knows how to properly tighten the crank pulley? When tightening the crank rotates  hmm.gif .
*
It needs 3/4 arm holder to hold the crankpulley.then one person need to tight it.not sure how much for torque for that and i never get the manual yet.most car i have done the (27mm bolt) need to torque 200Nm + angle tight 180°.if out side shop they just airgun it till stop.
ahpaul82
post Jun 16 2014, 07:08 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
Owner 5196,
I already noticed your car far far away due to your exhaust note, Haha.
You just passed by Plaza 33 10mins ago.. hehe.
Azuma-kun
post Jun 16 2014, 07:16 PM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
QUOTE(ahpaul82 @ Jun 16 2014, 07:08 PM)
Owner 5196,
I already noticed your car far far away due to your exhaust note, Haha.
You just passed by Plaza 33 10mins ago..  hehe.
*
Hahahaha damn! Kantoi!
marzuk88
post Jun 16 2014, 08:04 PM

New Member
*
Newbie
0 posts

Joined: Jul 2012
QUOTE(jctasoga @ Jun 15 2014, 09:14 PM)
city boy tongue.gif batu pahat in johor. near to sphiroth
*
owh, ya ka? maybe we can meet up next time when im around BP.
ahpaul82
post Jun 16 2014, 08:25 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(greddy @ Jun 16 2014, 02:08 PM)
My stock crank pulley damaged. Somehow the bolt loosened, guess vibration, the hole now enlarged. Thought wanna go for aftermarket pulley but was quoted 700 for the mythelogy lcp with dampener  shocking.gif. Other brands no dampener.

Anyway anyone knows how to properly tighten the crank pulley? When tightening the crank rotates  hmm.gif .
*
Then go for stock crank pulley loh.

Mythelogy LCP memang around that price.

QUOTE(surefire v LED @ Jun 16 2014, 02:11 PM)
Mine gonna be 5 years in September never service the air conditioning yet.
*
same goes here,

Car Manufactured @ Year2008 till now ..


QUOTE(angrysnail @ Jun 16 2014, 04:49 PM)
It needs 3/4 arm holder to hold the crankpulley.then one person need to tight it.not sure how much for torque for that and i never get the manual yet.most car i have done the (27mm bolt) need to torque 200Nm + angle tight 180°.if out side shop they just airgun it till stop.
*
I remember last time when timing belt service,

the mech ask me crank engine one time and he use his tools to tighten it due to his house don't have air-gun... shocking.gif
TripleJ104
post Jun 16 2014, 10:28 PM

New Member
*
Junior Member
11 posts

Joined: Jan 2010
QUOTE(ajaibman @ Jun 13 2014, 10:48 AM)
All Proton SC are bullshits, but if your car still under warranty no choice, what you need to do is build relationships with the Service Advisor, but still you have to guide him to pin point what the actual problem (self Diagnose) as their mechanic diagnose skill are only Text book from Proton deep.
My exora already passes the warranty period, now going to 3rd party workshop who understand Campro engine more than those mangkuk SC even as grand as COE Kesas.
*
QUOTE(ajaibman @ Jun 13 2014, 03:15 PM)
My area is Old Klang Road.. my newly found workshop (which always pushes me participate in their SNF event in Sepang) is in PJ PJS2 area.
*
At least u waited until end of warranty, me going PSC twice only, still got the 3rd free service voucher. But I am grateful there's nothing major happening at my car after owning it for 4years/148k km. Good to have workshop that understand campro engine better, in JB got campro tuner but a bit hassle for me to drive there for servicing.

QUOTE(fazron80 @ Jun 15 2014, 12:03 AM)
My fog lamp pecah for 2 years edy. Waiting for the other to pecah but very stubborn.
CAK and stiff ring what the difference. I know amount of rings is different. But both for same purpose. If not for EA having CAK only I'd go straight for stiff ring.
*
Bang can read about the technical info here,

www.stiffring.com/tech.html
ajaibman
post Jun 17 2014, 10:17 AM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
Rumors, not true or not.. have no idea.

Proton GSC..

1. Basic spec 1.0/1.3 NFE with VVT N/A Manual
2. Basic spec auto with CVT same engine
3. Medium spec 1.3 CFE Turbo CVT
4. Highline spec 1.6 CFE Turbo CVT.. (all the goodies, with ABS EBD ESP 6 Airbag dan lain2)
Azuma-kun
post Jun 17 2014, 10:43 AM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
Pergh...1.6 CFE for that small car? Dammit!!
ajaibman
post Jun 17 2014, 11:00 AM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(Azuma-kun @ Jun 17 2014, 10:43 AM)
Pergh...1.6 CFE for that small car? Dammit!!
*
CFE is podwerful, Yesterday,... I raced in my SUV with 360 Nm and 175 hp diesel.. dgn Preve CID .. dalam 100 - 180km/h SUV I boleh tinggalkan preve, tapi lepas tu preve tapau .. offcourse lagi ringan preve tu.. smile.gif

Nasib baik x kejar sbb rupa2nya Preve CID PDRM SPG Penang turun KL huhuuhu...
surefire v LED
post Jun 17 2014, 12:13 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
QUOTE(ajaibman @ Jun 17 2014, 11:00 AM)
CFE is podwerful, Yesterday,... I raced in my SUV with 360 Nm and 175 hp diesel.. dgn Preve CID .. dalam 100 - 180km/h SUV I boleh tinggalkan preve, tapi lepas tu preve tapau .. offcourse lagi ringan preve tu.. smile.gif

Nasib baik x kejar sbb rupa2nya Preve CID PDRM SPG Penang turun KL huhuuhu...
*
itu PDRM punya engine specs lain la bang.
surefire v LED
post Jun 17 2014, 12:13 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
QUOTE(ajaibman @ Jun 17 2014, 10:17 AM)
Rumors, not true or not.. have no idea.

Proton GSC..

1. Basic spec 1.0/1.3 NFE with VVT N/A Manual
2. Basic spec auto with CVT same engine
3. Medium spec 1.3 CFE Turbo CVT
4. Highline spec 1.6 CFE Turbo CVT.. (all the goodies, with ABS EBD ESP 6 Airbag dan lain2)
*
ini semua ada EPS ka bang (electronic power steering)
ajaibman
post Jun 17 2014, 01:46 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(surefire v LED @ Jun 17 2014, 12:13 PM)
ini semua ada EPS ka bang (electronic power steering)
*
Mungkin Jugak sbb engine bay sempit.. tapi I nampak satu evaporator (ntah apa mende nama dia) dkt tepi kiri (tube kilat stainless steel) serupa dgn Suprima S tapi x de kt preve dan bold sebelum 2014.
Azuma-kun
post Jun 17 2014, 01:53 PM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
1.3 CFE dah la kot. Takut pulak dengar 1.6 CFE tu hahaahha
mutt
post Jun 17 2014, 01:59 PM

please pronounce my nick as 'mood/mut' not 'mud/mat
******
Senior Member
1,288 posts

Joined: Jul 2007
From: Shah Alam
QUOTE(ajaibman @ Jun 17 2014, 10:17 AM)
Rumors, not true or not.. have no idea.

Proton GSC..

1. Basic spec 1.0/1.3 NFE with VVT N/A Manual
2. Basic spec auto with CVT same engine
3. Medium spec 1.3 CFE Turbo CVT
4. Highline spec 1.6 CFE Turbo CVT.. (all the goodies, with ABS EBD ESP 6 Airbag dan lain2)
*
I heard that Proton changed to Global Compact Car (GCC). If there is 1.6 variant with turbo definitely this car cant be small. Atleast bigger than myvi or even jazz.
eastwest
post Jun 17 2014, 03:35 PM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(ajaibman @ Jun 17 2014, 10:17 AM)
Rumors, not true or not.. have no idea.

Proton GSC..

1. Basic spec 1.0/1.3 NFE with VVT N/A Manual
2. Basic spec auto with CVT same engine
3. Medium spec 1.3 CFE Turbo CVT
4. Highline spec 1.6 CFE Turbo CVT.. (all the goodies, with ABS EBD ESP 6 Airbag dan lain2)
*
spec lain xde abs, abd, airbag?
ajaibman
post Jun 17 2014, 05:06 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(mutt @ Jun 17 2014, 01:59 PM)
I heard that Proton changed to Global Compact Car (GCC). If there is 1.6 variant with turbo definitely this car cant be small. Atleast bigger than myvi or even jazz.
*
Imagine Alza, or Livina..

But the rumors not confirmed yet.. could be true or false.. biasa la skrg kan Che Det era.. macam ada ISA kt dalam Proton ..
ajaibman
post Jun 17 2014, 05:10 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(eastwest @ Jun 17 2014, 03:35 PM)
spec lain xde abs, abd, airbag?
*
Airbag dgn ABS mesti ada, itu minimum standard equipment untuk kete kat msia... tapi minimum airbag 2 je ..
ahpaul82
post Jun 17 2014, 08:40 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(ajaibman @ Jun 17 2014, 01:46 PM)
Mungkin Jugak sbb engine bay sempit.. tapi I nampak satu evaporator (ntah apa mende nama dia) dkt tepi kiri (tube kilat stainless steel) serupa dgn Suprima S tapi x de kt preve dan bold sebelum 2014.
*
user posted image

Electric Vacuum Pump.

Proton has added an electric vacuum pump in the Suprima S which should enhance the braking system and is required for the Hill Hold Assist to function in the Premium version.
JeffreyYap
post Jun 17 2014, 08:54 PM

Anti lowballers & noob drivers since 2010
******
Senior Member
1,232 posts

Joined: Jun 2008
From: ¯\(º_o)/¯
Hey guys , anyone running high low soft hard with 32 clicks? What's your damper settings for front and rear? I'm so confused whether front needs more clicks than rear or rear needs more clicks. *clicks from soft. Currently running 15 front and 13 rear, spring rate 6k front 4k rear.
ahpaul82
post Jun 17 2014, 09:33 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(JeffreyYap @ Jun 17 2014, 08:54 PM)
Hey guys , anyone running high low soft hard with 32 clicks? What's your damper settings for front and rear? I'm so confused whether front needs more clicks than rear or rear needs more clicks. *clicks from soft. Currently running 15 front and 13 rear, spring rate 6k front 4k rear.
*
have you even try max setting for front and rear?

if not yet, then give it a try,

after that only tune down from Max setting until you satisfy.

different peoples different taste lah.. nod.gif
JeffreyYap
post Jun 17 2014, 09:58 PM

Anti lowballers & noob drivers since 2010
******
Senior Member
1,232 posts

Joined: Jun 2008
From: ¯\(º_o)/¯
QUOTE(ahpaul82 @ Jun 17 2014, 09:33 PM)
have you even try max setting for front and rear?

if not yet, then give it a try,

after that only tune down from Max setting until you satisfy.

different peoples different taste lah..  nod.gif
*
I'm confused with front and rear, which better to have higher clicks? From soft.

This post has been edited by JeffreyYap: Jun 17 2014, 09:58 PM
fazron80
post Jun 18 2014, 12:15 AM

New Member
*
Junior Member
27 posts

Joined: Oct 2007
NFE what engine? 1.0????
LoneWolfTNT
post Jun 18 2014, 12:59 AM

AKermit
******
Senior Member
1,346 posts

Joined: Jan 2003
From: Downtown
power steering hose leaking la pulak! dem! how much cost replace with blue colour hose(samco) ar? sapa itu tokeh bengkel seri lampei sini mari mau tanya hahahaha.... ! smile.gif
Max
post Jun 18 2014, 09:08 AM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
QUOTE(LoneWolfTNT @ Jun 18 2014, 12:59 AM)
power steering hose leaking la pulak! dem! how much cost replace with blue colour hose(samco) ar? sapa itu tokeh bengkel seri lampei sini mari mau tanya hahahaha.... ! smile.gif
*
power steering hose can replace with samco ka?
iinm, that pwr steering hose is pressure hose. must use high pressure capable hose and joint.
ajaibman
post Jun 18 2014, 09:35 AM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(fazron80 @ Jun 18 2014, 12:15 AM)
NFE what engine? 1.0????
*
Tu yg masih lagi blur.. ada sos ckp 1.0 ada plak ckp 1.3 NA ..

Susah nk korek info skrg ..
eastwest
post Jun 18 2014, 10:52 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(ajaibman @ Jun 17 2014, 05:10 PM)
Airbag dgn ABS mesti ada, itu minimum standard equipment untuk kete kat msia... tapi minimum airbag 2 je ..
*
nasib baik ada, kalo xde doh.gif
Azuma-kun
post Jun 18 2014, 11:51 AM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
QUOTE(LoneWolfTNT @ Jun 18 2014, 12:59 AM)
power steering hose leaking la pulak! dem! how much cost replace with blue colour hose(samco) ar? sapa itu tokeh bengkel seri lampei sini mari mau tanya hahahaha.... ! smile.gif
*
singchaii customer cari. Kasi ketuk harga kaw2 ok. 20% kita TT SolGarden hahahaha
TripleJ104
post Jun 19 2014, 12:10 AM

New Member
*
Junior Member
11 posts

Joined: Jan 2010
QUOTE(JeffreyYap @ Jun 17 2014, 08:54 PM)
Hey guys , anyone running high low soft hard with 32 clicks? What's your damper settings for front and rear? I'm so confused whether front needs more clicks than rear or rear needs more clicks. *clicks from soft. Currently running 15 front and 13 rear, spring rate 6k front 4k rear.
*
My setting from soft, front 9 clicks & 7 clicks rear. Still can play corner & retain comfort. U need to find setting that u feel comfortable with. Coz different car model have different behaviour/characteristic. Maybe u can read out about adjusting suspension tips & tune your suspension. Myself also like to fiddling with the adjustable & write the setting. For f&f mode i set 23 front & 26 rear. Handling seem have more oversteer. But that before I install stiff ring..now after install with 9clicks & 7 clicks is already oversteer.

Also I recently adjust my car height from front 2 finger & rear 3 finger to 2 finger front & 2 finger rear, the result I gain more traction during corners. Was thinking to adjust all 1 finger gap but when I think all the speed bump & parking ramp better not..huhu..
mutt
post Jun 19 2014, 08:31 PM

please pronounce my nick as 'mood/mut' not 'mud/mat
******
Senior Member
1,288 posts

Joined: Jul 2007
From: Shah Alam
CALLING FOR SEOUL GARDEN TT!

CALLING FOR SEOUL GARDEN TT!

SABTUDAY 21 JUNE 5PM ONWARDS

RM50/PAX KOREAN

VENUE: SEOUL GARDEN ___tbc___ BRANCH

CONTACT PERSON : AZUMA-KUNtumbungasakura 0111 862 5196

ALL MEMBERS ARE WELCOME NO MATTER WHAT CAR YOU ARE DRIVING

This post has been edited by mutt: Jun 19 2014, 09:41 PM
eastwest
post Jun 20 2014, 11:29 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(mutt @ Jun 19 2014, 08:31 PM)
CALLING FOR SEOUL GARDEN TT!

CALLING FOR SEOUL GARDEN TT!

SABTUDAY 21 JUNE 5PM ONWARDS

RM50/PAX KOREAN

VENUE: SEOUL GARDEN ___tbc___ BRANCH

CONTACT PERSON : AZUMA-KUNtumbungasakura 0111 862 5196

ALL MEMBERS ARE WELCOME NO MATTER WHAT CAR YOU ARE DRIVING
*
petang esok? most probably tak dapat join sweat.gif
Azuma-kun
post Jun 20 2014, 12:46 PM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
Esok pagi, TT kat workshop singchaii for breakfast! Pukul 7/8 pagi.

Brilliant Auto Care
No.21 Jalan Rampai Maju 5, Pusat Industri Seri Rampai. Taman Sri Rampai
53300 Kuala Lumpur, Malaysia

Jom lepak2 kenal2 orang.
Azuma-kun
post Jun 20 2014, 12:46 PM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
Pagi petang kita TT!
ahpaul82
post Jun 20 2014, 01:12 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(Azuma-kun @ Jun 20 2014, 12:46 PM)
Esok pagi, TT kat workshop singchaii for breakfast! Pukul 7/8 pagi.

Brilliant Auto Care
No.21 Jalan Rampai Maju 5, Pusat Industri Seri Rampai. Taman Sri Rampai
53300 Kuala Lumpur, Malaysia

Jom lepak2 kenal2 orang.
*
so early ?
scare cannot wake up leh.. sweat.gif
kinkon86
post Jun 20 2014, 03:20 PM

New Member
*
Junior Member
5 posts

Joined: Jun 2012
Besok kerja la.. sedis
kobe10
post Jun 20 2014, 05:21 PM

New Member
*
Junior Member
6 posts

Joined: Apr 2009
From: Puchong, Selangor
So early ah. Hahaha... I baru senang lepas 10am... Azuma take tidor....
mutt
post Jun 20 2014, 10:10 PM

please pronounce my nick as 'mood/mut' not 'mud/mat
******
Senior Member
1,288 posts

Joined: Jul 2007
From: Shah Alam
PAGI CANT COME DOESNT MATTER

PETANG MUST COME SEOUL GARDEN!!!
Azuma-kun
post Jun 21 2014, 01:13 AM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
Anyone coming for for morning TT, give me a ring at

» Click to show Spoiler - click again to hide... «
Azuma-kun
post Jun 21 2014, 12:13 PM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
I think we decided to go for Seoul Garden at KL Festival City Mall 5PM ah! Dont be so late!

This post has been edited by Azuma-kun: Jun 21 2014, 12:13 PM
voscar
post Jun 22 2014, 06:01 PM

Regular
******
Senior Member
1,526 posts

Joined: Dec 2005
is waja cps a good buy ar? found alot <rm20k at mudah. accessories like door handle and power window got any improvement over previous gen waja?
plan to replace for my dad's super old car, currently he daily travel highway 30km, but soon will retire so mostly would be city drive makan angin...
kinkon86
post Jun 22 2014, 09:15 PM

New Member
*
Junior Member
5 posts

Joined: Jun 2012
Power window still shit.
surefire v LED
post Jun 22 2014, 09:29 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
QUOTE(kinkon86 @ Jun 22 2014, 09:15 PM)
Power window still shit.
*
How bad through your experience.
kinkon86
post Jun 22 2014, 09:31 PM

New Member
*
Junior Member
5 posts

Joined: Jun 2012
I had it change twice a year.
surefire v LED
post Jun 22 2014, 09:34 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
QUOTE(kinkon86 @ Jun 22 2014, 09:31 PM)
I had it change twice a year.
*
The whole set or just 1 unit - change at proton?
If it is faulty within 6 months and you still keep the receipt, you can claim warranty but you must do it at Proton Edar shop.
acid427
post Jun 22 2014, 09:36 PM

On my way
****
Senior Member
699 posts

Joined: Aug 2006
From: Today, 02:33 AM
QUOTE(kinkon86 @ Jun 22 2014, 09:31 PM)
I had it change twice a year.
*
User problem I guess? My bro's waja cps 2008 no power window problem.
kinkon86
post Jun 22 2014, 09:47 PM

New Member
*
Junior Member
5 posts

Joined: Jun 2012
I think its user problem. When smoking i like to put my hand on the window.
voscar
post Jun 22 2014, 10:50 PM

Regular
******
Senior Member
1,526 posts

Joined: Dec 2005
QUOTE(surefire v LED @ Jun 22 2014, 09:34 PM)
The whole set or just 1 unit - change at proton?
If it is faulty within 6 months and you still keep the receipt, you can claim warranty but you must do it at Proton Edar shop.
*
Car out of warranty but power window if replace at Proton Edar shop still got 6 months warranty? No bad wor..
how abt other parts? engine reliability ok? i'm sure alot of cps owner sure thrash the rpm high to enjoy power, so buying secondhand car need to consider the engine...
surefire v LED
post Jun 22 2014, 11:07 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
QUOTE(voscar @ Jun 22 2014, 10:50 PM)
Car out of warranty but power window if replace at Proton Edar shop still got 6 months warranty? No bad wor..
how abt other parts? engine reliability ok? i'm sure alot of cps owner sure thrash the rpm high to enjoy power, so buying secondhand car need to consider the engine...
*
As long as you keep the receipt than 6 months warranty applied.
Other parts also the same like timing belt etc.
jctasoga
post Jun 23 2014, 09:37 AM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
mine since 2009 no probs except 1 time when the passenger side window dropped out ie misalinged. need to keep it lubricated i mean the window sills/gutter.
JeffreyYap
post Jun 23 2014, 04:34 PM

Anti lowballers & noob drivers since 2010
******
Senior Member
1,232 posts

Joined: Jun 2008
From: ¯\(º_o)/¯
A foreman told me that aircond service need to remove dashboard? For neo cps.
JeffreyYap
post Jun 23 2014, 04:36 PM

Anti lowballers & noob drivers since 2010
******
Senior Member
1,232 posts

Joined: Jun 2008
From: ¯\(º_o)/¯
QUOTE(TripleJ104 @ Jun 19 2014, 12:10 AM)
My setting from soft, front 9 clicks & 7 clicks rear. Still can play corner & retain comfort. U need to find setting that u feel comfortable with. Coz different car model have different behaviour/characteristic. Maybe u can read out about adjusting suspension tips & tune your suspension. Myself also like to fiddling with the adjustable & write the setting. For f&f mode i set 23 front & 26 rear. Handling seem have more oversteer. But that before I install stiff ring..now after install with 9clicks & 7 clicks is already oversteer.

Also I recently adjust my car height from front 2 finger & rear 3 finger to 2 finger front & 2 finger rear, the result I gain more traction during corners. Was thinking to adjust all 1 finger gap but when I think all the speed bump & parking ramp better not..huhu..
*
Thank bro, I set them to 12/12

This post has been edited by JeffreyYap: Jun 23 2014, 04:39 PM
voscar
post Jun 23 2014, 05:15 PM

Regular
******
Senior Member
1,526 posts

Joined: Dec 2005
QUOTE(surefire v LED @ Jun 22 2014, 11:07 PM)
As long as you keep the receipt than 6 months warranty applied.
Other parts also the same like timing belt etc.
*
ic, seems good on the after service warranty. smile.gif
thanks for letting me know.
TripleJ104
post Jun 23 2014, 10:05 PM

New Member
*
Junior Member
11 posts

Joined: Jan 2010
QUOTE(voscar @ Jun 22 2014, 10:50 PM)
Car out of warranty but power window if replace at Proton Edar shop still got 6 months warranty? No bad wor..
how abt other parts? engine reliability ok? i'm sure alot of cps owner sure thrash the rpm high to enjoy power, so buying secondhand car need to consider the engine...
*
Hi,

The engine u need to see service record & see how is the current engine condition before u buy. If the previous owner take good care of it the engine shouldn't have major problem.

Yes got member who got problem when engine pushed hard..I mean porn hard & some member reach 200k km with no problem.

Also when owning a second hand car it depend on luck also. Happy hunting
eastwest
post Jun 24 2014, 09:14 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(Azuma-kun @ Jun 21 2014, 12:13 PM)
I think we decided to go for Seoul Garden at KL Festival City Mall 5PM ah! Dont be so late!
*
so macam mana? sape yg datang?
Azuma-kun
post Jun 24 2014, 07:44 PM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
CEL again!!! Hahahahahahaha farking car!! I wanna buy another car ini macam! sweat.gif
eastwest
post Jun 25 2014, 09:20 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(Azuma-kun @ Jun 24 2014, 07:44 PM)
CEL again!!! Hahahahahahaha farking car!! I wanna buy another car ini macam! sweat.gif
*
CEL??? apa tu?
Max
post Jun 25 2014, 11:22 AM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
QUOTE(eastwest @ Jun 25 2014, 09:20 AM)
CEL??? apa tu?
*
Check Engine Light
fazron80
post Jun 26 2014, 09:57 PM

New Member
*
Junior Member
27 posts

Joined: Oct 2007
QUOTE(JeffreyYap @ Jun 23 2014, 04:34 PM)
A foreman told me that aircond service need to remove dashboard? For neo cps.
*
If cooling coil i think all car needs to open dashboard right. Aircond problem?
ahpaul82
post Jun 26 2014, 10:13 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
Which mean I believe none of us here dismantle dashboard to full service air-cond, yet ...
hickups
post Jun 27 2014, 02:36 AM

Casual
***
Junior Member
477 posts

Joined: Jan 2003
From: Klang
guys waja light 1 is hid, 1 more is like fog light/high beam..
can i change that light to normal bulb that has low beam/high beam example like wira or maybe change ti hid too?
JeffreyYap
post Jun 27 2014, 08:33 AM

Anti lowballers & noob drivers since 2010
******
Senior Member
1,232 posts

Joined: Jun 2008
From: ¯\(º_o)/¯
QUOTE(fazron80 @ Jun 26 2014, 09:57 PM)
If cooling coil i think all car needs to open dashboard right. Aircond problem?
*
He said normal service only. He said old cars no need, latest cars need to remove dashboard, I doubt his mechanic skill.
Max
post Jun 27 2014, 09:15 AM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
i wonder, why need to service aircond, if no problem? hmm.gif
last time my wife's hyundai atoz never service aircond (almost 9 years until sold off). biggrin.gif
i just clean/blow the cooling coil & blower from dust.
the aircond never have problem, stay cool.

from what i know/heard, once the aircond system taken off (disconnect or open the hose system, cooling coil, valve, etc), later more problem will arise. hmm.gif
Azuma-kun
post Jun 27 2014, 05:54 PM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
Tomorrow we have threebond session at Brilliant Auto Care, Sri Rampai. 10am until we gone.

Just come lepak or you can join as well.
fazron80
post Jun 29 2014, 01:05 PM

New Member
*
Junior Member
27 posts

Joined: Oct 2007
QUOTE(JeffreyYap @ Jun 27 2014, 08:33 AM)
He said normal service only. He said old cars no need, latest cars need to remove dashboard, I doubt his mechanic skill.
*
If aircond no problem no need full service. Paying too much to fix something not broken. Just find air cond shop with cleaning machine. Top up compressor oil. Clean condenser. I did myvi with 200 charge. My gen2 never done any air cond service yet. Just replace compressor oil. And top up gas. 3 years back when air cond not cold. Ok till now.
eastwest
post Jun 30 2014, 09:21 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
my car muffler broke... apa efek kalo tak tukar? how much?
fendi_zc
post Jul 2 2014, 12:02 AM

New Member
*
Newbie
0 posts

Joined: Jul 2014
hello friend... i just bought 2nd hand waja cps MT 2008 about 1 month ago. i also have request to join cps tribe group at fb.tq
Azuma-kun
post Jul 2 2014, 12:08 AM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
QUOTE(fendi_zc @ Jul 2 2014, 12:02 AM)
hello friend... i just bought 2nd hand waja cps MT 2008 about 1 month ago. i also have request to join cps tribe group at fb.tq
*
Oh hang ka yg request. Wait ah, gonna approve it.
fendi_zc
post Jul 2 2014, 12:14 AM

New Member
*
Newbie
0 posts

Joined: Jul 2014
tq approve bro
ajaibman
post Jul 2 2014, 10:04 AM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
Why on earth those CFE owner keep calling their turbo "soft" ? are the turbo PANDAN ?

when I mention turbo is turbo and just the size different for the usage of power.. kena kutuk kaw2...

Haizz.. PPL can't brain them.. I guess CFE is their first turbo.. and they jelly because is PANDAN...

Max
post Jul 2 2014, 11:09 AM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
they say soft turbo maybe bcoz cant feel the 'pull' like 'turbo car' like impreza, evo..
u know la.. their mindset.. turbo car = evo, impreza, gsr.. doh.gif
voscar
post Jul 2 2014, 11:30 AM

Regular
******
Senior Member
1,526 posts

Joined: Dec 2005
QUOTE(ajaibman @ Jul 2 2014, 10:04 AM)
Why on earth those CFE owner keep calling their turbo "soft" ? are the turbo PANDAN ?

when I mention turbo is turbo and just the size different for the usage of power.. kena kutuk kaw2...

Haizz.. PPL can't brain them.. I guess CFE is their first turbo.. and they jelly because is PANDAN...
*
isn't that got difference between soft turbo or "hard" turbo?
i still remember last time saw the star used car ad, alot of volvo 940, 850 advertised soft turbo there...

soft turbo good in acceleration while "hard" turbo good in midrange-high rev, if not mistaken...
R.Y.D.E.C.K
post Jul 2 2014, 11:53 AM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(fendi_zc @ Jul 2 2014, 12:02 AM)
hello friend... i just bought 2nd hand waja cps MT 2008 about 1 month ago. i also have request to join cps tribe group at fb.tq
*
heyy sapp dude, welcome...MT yaa..whta color?odometer? whack it ady? laugh.gif laugh.gif thumbup.gif
R.Y.D.E.C.K
post Jul 2 2014, 11:58 AM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(ahpaul82 @ Jun 26 2014, 10:13 PM)
Which mean I believe none of us here dismantle dashboard to full service air-cond, yet ...
*
wait paul...remember?i dismantle the dahsboard ady..during the "breakaway" period laugh.gif wait ill put the foto here...

Attached Image brows.gif
eastwest
post Jul 2 2014, 01:09 PM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(R.Y.D.E.C.K @ Jul 2 2014, 11:58 AM)
wait paul...remember?i dismantle the dahsboard ady..during the "breakaway" period  laugh.gif wait ill put the foto here...

Attached Image brows.gif
*
why dismantle? susah ke? tongue.gif
ajaibman
post Jul 2 2014, 01:38 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(Max @ Jul 2 2014, 11:09 AM)
they say soft turbo maybe bcoz cant feel the 'pull' like 'turbo car' like impreza, evo..
u know la.. their mindset.. turbo car = evo, impreza, gsr..  doh.gif
*
Then these ppl should drive the Turbo Diesel...

That's what I called "HARDCORE" Turbo... just dont ask abt the top speed smile.gif
Max
post Jul 2 2014, 02:37 PM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
QUOTE(ajaibman @ Jul 2 2014, 01:38 PM)
Then these ppl should drive the Turbo Diesel...

That's what I called "HARDCORE" Turbo... just dont ask abt the top speed smile.gif
*
nowadays turbo diesel also quite fast..
i tumpang my friend Ssangyong Rexton 1st gen, easily reach 160kmh. ohmy.gif
lowpro
post Jul 2 2014, 05:57 PM

Getting Started
**
Junior Member
180 posts

Joined: Jan 2009
QUOTE(Max @ Jul 2 2014, 02:37 PM)
nowadays turbo diesel also quite fast..
i tumpang my friend Ssangyong Rexton 1st gen, easily reach 160kmh. ohmy.gif
*

those rextons are fast!
ajaibman
post Jul 2 2014, 08:06 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(lowpro @ Jul 2 2014, 05:57 PM)
those rextons are fast!
*
Ahem... this is my other car driven by my wifi..

user posted image
ahpaul82
post Jul 2 2014, 10:28 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(R.Y.D.E.C.K @ Jul 2 2014, 11:58 AM)
wait paul...remember?i dismantle the dahsboard ady..during the "breakaway" period  laugh.gif wait ill put the foto here...

Attached Image brows.gif
*
WoW,

more photos plz.

I can't recall what you mean by "breakayway" period lah sweat.gif
fendi_zc
post Jul 3 2014, 11:10 PM

New Member
*
Newbie
0 posts

Joined: Jul 2014
QUOTE(R.Y.D.E.C.K @ Jul 2 2014, 11:53 AM)
heyy sapp dude, welcome...MT yaa..whta color?odometer? whack it ady?  laugh.gif  laugh.gif  thumbup.gif
*
bronze garnet, manual. 80k mileage.
fendi_zc
post Jul 3 2014, 11:12 PM

New Member
*
Newbie
0 posts

Joined: Jul 2014
QUOTE(lowpro @ Jul 2 2014, 05:57 PM)
those rextons are fast!
*
last time i drive waja 2002 AT 180kmh at highway and being overtake by 1st model rexton biggrin.gif
R.Y.D.E.C.K
post Jul 4 2014, 10:45 AM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(ahpaul82 @ Jul 2 2014, 10:28 PM)
WoW,

more photos plz.

I can't recall what you mean by "breakayway" period lah  sweat.gif
*
pm for story laugh.gif lol laugh.gif
da drummer
post Jul 5 2014, 02:04 AM

:)
*****
Senior Member
808 posts

Joined: Jun 2008
From: ~Negeri Sembilan~Sarawak~
QUOTE(Azuma-kun @ Jul 2 2014, 12:08 AM)
Oh hang ka yg request. Wait ah, gonna approve it.
*
can i joint?got link?
tq sir

dh joint…tq admin. laugh.gif

This post has been edited by da drummer: Jul 5 2014, 01:02 PM
TripleJ104
post Jul 6 2014, 09:16 PM

New Member
*
Junior Member
11 posts

Joined: Jan 2010
QUOTE(ajaibman @ Jul 2 2014, 10:04 AM)
Why on earth those CFE owner keep calling their turbo "soft" ? are the turbo PANDAN ?

when I mention turbo is turbo and just the size different for the usage of power.. kena kutuk kaw2...

Haizz.. PPL can't brain them.. I guess CFE is their first turbo.. and they jelly because is PANDAN...
*
Huhuhu...maybe they know your "sprintex inside" exo kot..so cannot loose.

QUOTE(ajaibman @ Jul 2 2014, 08:06 PM)
Ahem... this is my other car driven by my wifi..

user posted image
*
What car is this? Rexton? I never seen one in flesh.

QUOTE(fendi_zc @ Jul 3 2014, 11:10 PM)
bronze garnet, manual. 80k mileage.
*
Bro...what about your timing belt? have it being replace?
TripleJ104
post Jul 6 2014, 09:17 PM

New Member
*
Junior Member
11 posts

Joined: Jan 2010
QUOTE(da drummer @ Jul 5 2014, 02:04 AM)
can i joint?got link?
tq sir

dh joint…tq admin.  laugh.gif
*
Ko la aku ingat awek...baru aku ingat
da drummer
post Jul 7 2014, 10:01 PM

:)
*****
Senior Member
808 posts

Joined: Jun 2008
From: ~Negeri Sembilan~Sarawak~
QUOTE(TripleJ104 @ Jul 6 2014, 09:17 PM)
Ko la aku ingat awek...baru aku ingat
*
ahaha..trgelak aku mase tuh..anyway..sila tunjuk ajr ye..tq
Azuma-kun
post Jul 9 2014, 10:08 PM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
Buka Puasa LyN Gen2 Members

Day/Date : Jumaat - 11 July 2014
Venue : Nando's @ Alamanda Putrajaya
Time : 6.30PM onwards

Confirmed participants
1. Jenal n wife
2. Underdablanket@KakJue
3. Roro@Pajeli
4. Silvadesk@JenJenniJennifer(sampai lmbt)
5. Katz79@Arep
6. Ultramaman@maman
7. Mael n wife
8.
9.

So please update participant list...senang nk book meja


senang jer diorang ni buat TT buka puasa. tak sampai seminggu plan. tempat pun semua agree. kat sini? alasan manjang laugh.gif

solgaden sampai mcm nak bergaduh baru jalan tu pun bape kerat jer whistling.gif

This post has been edited by Azuma-kun: Jul 9 2014, 10:09 PM
eastwest
post Jul 10 2014, 02:09 PM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(Azuma-kun @ Jul 9 2014, 10:08 PM)
Buka Puasa LyN Gen2 Members

Day/Date : Jumaat - 11 July 2014
Venue : Nando's @ Alamanda Putrajaya
Time : 6.30PM onwards

Confirmed participants
1. Jenal n wife
2. Underdablanket@KakJue
3. Roro@Pajeli
4. Silvadesk@JenJenniJennifer(sampai lmbt)
5. Katz79@Arep
6. Ultramaman@maman
7. Mael n wife
8.
9.

So please update participant list...senang nk book meja
senang jer diorang ni buat TT buka puasa. tak sampai seminggu plan. tempat pun semua agree. kat sini? alasan manjang laugh.gif

solgaden sampai mcm nak bergaduh baru jalan tu pun bape kerat jer whistling.gif
*
laugh.gif laugh.gif
surefire v LED
post Jul 10 2014, 03:35 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
Sorry la bro (alasan lagi)
Ade moreh giliran aku
R.Y.D.E.C.K
post Jul 10 2014, 04:30 PM

Getting Started
**
Junior Member
246 posts

Joined: May 2008

QUOTE(Azuma-kun @ Jul 9 2014, 10:08 PM)
Buka Puasa LyN Gen2 Members

Day/Date : Jumaat - 11 July 2014
Venue : Nando's @ Alamanda Putrajaya
Time : 6.30PM onwards

Confirmed participants
1. Jenal n wife
2. Underdablanket@KakJue
3. Roro@Pajeli
4. Silvadesk@JenJenniJennifer(sampai lmbt)
5. Katz79@Arep
6. Ultramaman@maman
7. Mael n wife
8.
9.

So please update participant list...senang nk book meja
senang jer diorang ni buat TT buka puasa. tak sampai seminggu plan. tempat pun semua agree. kat sini? alasan manjang laugh.gif

solgaden sampai mcm nak bergaduh baru jalan tu pun bape kerat jer whistling.gif
*
esok ada company function bebuka gakk.. biggrin.gif
ajaibman
post Jul 11 2014, 01:37 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(TripleJ104 @ Jul 6 2014, 09:16 PM)
Huhuhu...maybe they know your "sprintex inside" exo kot..so cannot loose.
What car is this? Rexton? I never seen one in flesh.
*
No, they didnt even know what car I drive, but is an online CFE forum (Bold/Suprima/Preve)

The car is Ssangyong Actyon or outside Malaysia Korando C200 .. Turbo Diesel VGT 2L
eastwest
post Jul 16 2014, 11:45 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
How to know our car current value?
Xefron
post Jul 16 2014, 11:48 AM

Look at all my stars!!
*******
Senior Member
2,507 posts

Joined: Jan 2003
QUOTE(eastwest @ Jul 16 2014, 11:45 AM)
How to know our car current value?
*
http://www.einsuran.com/vmv.html
eastwest
post Jul 16 2014, 12:04 PM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(Xefron @ Jul 16 2014, 11:48 AM)
http://www.einsuran.com/vmv.html
*
Estimation right? Is the car mileage have any effect on the value?
fazron80
post Jul 16 2014, 11:53 PM

New Member
*
Junior Member
27 posts

Joined: Oct 2007
For insurance cover only. Trade-in price not even close.
eastwest
post Jul 17 2014, 09:16 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(fazron80 @ Jul 16 2014, 11:53 PM)
For insurance cover only. Trade-in price not even close.
*
sweat.gif
jctasoga
post Jul 17 2014, 10:07 AM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
wan change car ya? hehe... i assume our trade in for over 5 year old waja will be very very little... wat car targetting next?
eastwest
post Jul 22 2014, 10:00 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(jctasoga @ Jul 17 2014, 10:07 AM)
wan change car ya? hehe... i assume our trade in for over 5 year old waja will be very very little... wat car targetting next?
*
no la... just asking...
surefire v LED
post Jul 24 2014, 06:29 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
Guys just wanna confirm (refer photos) those are just dirt right? I ask the mechanic while changing the OE he said its not leaking just the dirt collected by the dust.My mileage is just hit 100k km.
» Click to show Spoiler - click again to hide... «
ahpaul82
post Jul 24 2014, 10:49 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(surefire v LED @ Jul 24 2014, 06:29 PM)
Guys just wanna confirm (refer photos) those are just dirt right? I ask the mechanic while changing the OE he said its not leaking just the dirt collected by the dust.My mileage is just hit 100k km.
» Click to show Spoiler - click again to hide... «

*
Try clean it and check again one week later.

if still ini macam,

it could be the gasket rocket cover leaking...

Attached Image
surefire v LED
post Jul 25 2014, 05:25 AM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
ok thanks will monitor - normally how much it cost?
R.Y.D.E.C.K
post Jul 25 2014, 08:43 AM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(surefire v LED @ Jul 24 2014, 06:29 PM)
Guys just wanna confirm (refer photos) those are just dirt right? I ask the mechanic while changing the OE he said its not leaking just the dirt collected by the dust.My mileage is just hit 100k km.
» Click to show Spoiler - click again to hide... «

*
probably cuz mine since 1st month until 159k km tht dirt exactly like tht..clean it..using wd40 - but no water..bcoz its will strengthen the stain..wd40 and toothbrush laugh.gif
jctasoga
post Jul 25 2014, 09:10 AM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
its oil + dirt so need a degreaser. some soap will do. water sure cannot wash it off due to water+oil dun mix. haha...

anyway i think the rocker cover gasket leaking will have issue? mine also got this dirt around and might wanna change it in my next EO change.
surefire v LED
post Jul 25 2014, 09:32 AM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
QUOTE(jctasoga @ Jul 25 2014, 09:10 AM)
its oil + dirt so need a degreaser. some soap will do. water sure cannot wash it off due to water+oil dun mix. haha...

anyway i think the rocker cover gasket leaking will have issue? mine also got this dirt around and might wanna change it in my next EO change.
*
I have changed mine (the rocker cover) last year but mine is clean now except for that pictures.
ahpaul82
post Jul 25 2014, 08:21 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(surefire v LED @ Jul 25 2014, 05:25 AM)
ok thanks will monitor - normally how much it cost?
*
calling singchaii biggrin.gif
jctasoga
post Jul 26 2014, 12:34 PM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
to all muslim cps-ers, selamat hari raya and drive carefully on balik kampung road
diablo69
post Jul 27 2014, 09:07 AM

Cruel Intention
*****
Senior Member
983 posts

Joined: Jan 2003
From: Rawang - Sepang - Pasir Gudang
Hi... Any body know good workshop in jury or sungai petani... Need to get my brake hose replaced, bocor...
fazron80
post Jul 30 2014, 03:15 PM

New Member
*
Junior Member
27 posts

Joined: Oct 2007
QUOTE(surefire v LED @ Jul 24 2014, 06:29 PM)
Guys just wanna confirm (refer photos) those are just dirt right? I ask the mechanic while changing the OE he said its not leaking just the dirt collected by the dust.My mileage is just hit 100k km.
» Click to show Spoiler - click again to hide... «

*
mine looks worse than that. i think leaking like me. How much the gasket cost? cam seal the same thing eh?
eastwest
post Aug 5 2014, 09:46 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(fazron80 @ Jul 30 2014, 03:15 PM)
mine looks worse than that. i think leaking like me. How much the gasket cost? cam seal the same thing eh?
*
confirm leaking? not just dirt? my car engine bay so dirty laugh.gif , I don't know whether it's dirt or oil....
jctasoga
post Aug 5 2014, 01:12 PM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
bro, basuh engine kasi pamper skit...
surefire v LED
post Aug 5 2014, 02:44 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
sudah basuh enjin nia - after basuh enjin than only i realized that dirt doh.gif
jctasoga
post Aug 5 2014, 03:36 PM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
boss, maybe u need to extra clean that area with degreaser. due to engine oil harder to wash away. after washing, top up engine oil until optimum level. If driving say 1 week to 2 weeks still got this problem, then confirm is leaking edi.

worse case, change the seal when u r doing engine oil change. smile.gif
surefire v LED
post Aug 5 2014, 03:45 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
oredi pancut itu degreaser - 1 week oredi now still monitoring - but once shine it using flashlight at the same area still can see the oil on top of the side gasket (the one in the pictures) - apa daa Proton management.
Since day 1 never use that oil from kedai spare parts - all the while using semi sintetik from Proton Edar and now since Nov 2011 using FS Royal Purple - punnnn masih ade leaking - my boss using 10 years old Honda City now clocking 300k ++ km tiada leaking langsung - he is using semi sintetik and change the OE every 10k km - when i was on semi sintetik i change the OE at every 7k km.
letih la ini machiam - my 2nd Proton.
nanti takut merebak ke tempat lain doh.gif
still got 24 months loan to go.

This post has been edited by surefire v LED: Aug 5 2014, 03:47 PM
jctasoga
post Aug 5 2014, 05:00 PM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
suggest to change it if you feel its unsightly bro... otherwise u can use higher viscosity to plug the leakage...

well, not all cars are made to be perfect. i'm ur boss got rebuild the engine...
fazron80
post Aug 5 2014, 10:11 PM

New Member
*
Junior Member
27 posts

Joined: Oct 2007
QUOTE(eastwest @ Aug 5 2014, 09:46 AM)
confirm leaking? not just dirt? my car engine bay so dirty laugh.gif , I don't know whether it's dirt or oil....
*
Yup leaking. But i think the dirt surrounding the leaking oil seal it from anymore leaks because oil dip level is consistent. Dunno what i'm talking about.
Azuma-kun
post Aug 6 2014, 12:30 AM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
QUOTE(fazron80 @ Aug 5 2014, 10:11 PM)
Yup leaking. But i think the dirt surrounding the leaking oil seal it from anymore leaks because oil dip level is consistent. Dunno what i'm talking about.
*
Wahahahahaahahahahahah
jctasoga
post Aug 6 2014, 08:45 AM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
bro fazron80, u mean the dirt clogs up the leakage preventing any further oil seeping out.

if you use any oil cleaning agent, it may open up the clogs then leaking again. smile.gif

anyway, its a good explanation. haha...
fazron80
post Aug 6 2014, 10:32 AM

New Member
*
Junior Member
27 posts

Joined: Oct 2007
QUOTE(jctasoga @ Aug 6 2014, 08:45 AM)
bro fazron80, u mean the dirt clogs up the leakage preventing any further oil seeping out.

if you use any oil cleaning agent, it may open up the clogs then leaking again. smile.gif

anyway, its a good explanation. haha...
*
Hahaha. U explain better. Dunno wth i wrote.
jctasoga
post Aug 6 2014, 01:33 PM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
glad i can help smile.gif
fazron80
post Aug 6 2014, 10:46 PM

New Member
*
Junior Member
27 posts

Joined: Oct 2007
QUOTE(jctasoga @ Aug 6 2014, 01:33 PM)
glad i can help smile.gif
*
rclxms.gif campro gasket seems to fail a lot.

jctasoga
post Aug 7 2014, 08:10 AM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
hot hot engine... wink.gif
eastwest
post Aug 7 2014, 01:44 PM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(fazron80 @ Aug 5 2014, 10:11 PM)
Yup leaking. But i think the dirt surrounding the leaking oil seal it from anymore leaks because oil dip level is consistent. Dunno what i'm talking about.
*
Google translate:
QUOTE
Yup bocor. Tetapi saya berfikir kotoran sekitar meterai minyak bocor dari bocor lagi kerana tahap penurunan minyak adalah konsisten. Dunno apa yang saya bercakap tentang.


laugh.gif tongue.gif
jctasoga
post Aug 7 2014, 05:29 PM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
google translate is really something... haha..
ajaibman
post Aug 7 2014, 05:35 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(jctasoga @ Aug 7 2014, 08:10 AM)
hot hot engine... wink.gif
*
Damn right, I got 90+ degrees Celsius of hot air passing through the cylinder head every stroke cycle
angrysnail
post Aug 7 2014, 10:43 PM

SuperStars
******
Senior Member
1,413 posts

Joined: Aug 2009
From: Damansara
QUOTE(surefire v LED @ Aug 5 2014, 03:45 PM)
oredi pancut itu degreaser - 1 week oredi now still monitoring - but once shine it using flashlight at the same area still can see the oil on top of the side gasket (the one in the pictures) - apa daa Proton management.
Since day 1 never use that oil from kedai spare parts - all the while using semi sintetik from Proton Edar and now since Nov 2011 using FS Royal Purple - punnnn masih ade leaking - my boss using 10 years old Honda City now clocking 300k ++ km tiada leaking langsung - he is using semi sintetik and change the OE every 10k km - when i was on semi sintetik i change the OE at every 7k km.
letih la ini machiam - my 2nd Proton.
nanti takut merebak ke tempat lain  doh.gif
still got 24 months loan to go.
*
Bro,still got 24 month loan.acceptable for me.Last time i worked with mercedes benz dealer,u can see almost all C200CGI,E200CGi leaks not even 3 month with mileage barely 2000.the leaks not kinda small,its oil pressure switch and cylinder head bolt behind the flywheel housing,need to remove gearbox and cylinder head to tighten back.3 month old car already rape kaw2. doh.gif

but proton aftersales really sucks,just do service,all complaints give a lot of excuses.This and that.Drag long time,i never understand we in Malaysia take 2 weeks to order gear knob parts???..while in mercedes before just take 5-7 days from germany to come here.

Proton ppl also dun care about their products. shakehead.gif


fazron80
post Aug 10 2014, 01:51 PM

New Member
*
Junior Member
27 posts

Joined: Oct 2007
QUOTE(eastwest @ Aug 7 2014, 01:44 PM)
Google translate:
laugh.gif  tongue.gif
*
Lol. Ayat google. Sebab tu bnyk buku jual ntah apa2 bahasa dia.
ajaibman
post Aug 11 2014, 09:15 AM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(angrysnail @ Aug 7 2014, 10:43 PM)

but proton aftersales really sucks,just do service,all complaints give a lot of excuses.This and that.Drag long time,i never understand we in Malaysia take 2 weeks to order gear knob parts???..while in mercedes before just take 5-7 days from germany to come here.

Proton ppl also dun care about their products. shakehead.gif
*
I feel you bro....

Every product has its defect, nothing is perfect in the world as long still human made.... but how to rectify and fix the problem is what matters..

Similar like Volkswagen.. got problem but SC like shiett.. also loosing market.. when the last time you see a golf driving on the road? getting lesser n lesser..

That one can be avoided, as there are more choices of car on the VW price range.. but Proton.. is different story.. we are "forced" to buy due to the high tax that Msia imposed on the motor vehicle.

@ least when a product already selling by itself.. make an effort to have better Aftersales..
eastwest
post Aug 18 2014, 09:00 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
....rattling.....
jctasoga
post Aug 18 2014, 10:15 AM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
stuff it with foam... or auto foam or replace all mountings smile.gif
RextonHub
post Aug 19 2014, 09:20 PM

New Member
*
Newbie
0 posts

Joined: May 2011
QUOTE(fendi_zc @ Jul 3 2014, 11:12 PM)
last time i drive waja 2002 AT 180kmh at highway and being overtake by 1st model rexton biggrin.gif
*
Rexton top speed could reach 200kmh, the key is the acceleration from 120kmh ~ 180kmh that could take most smaller cars ages to reach.
ajaibman
post Aug 19 2014, 10:33 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(RextonHub @ Aug 19 2014, 09:20 PM)
Rexton top speed could reach 200kmh, the key is the acceleration from 120kmh ~ 180kmh that could take most smaller cars ages to reach.
*
That is correct bro Wilson... especially with Alpine Ecomap smile.gif
sgarrista
post Aug 20 2014, 05:18 AM

New Member
*
Newbie
0 posts

Joined: Aug 2011
morning guys,

sorry to intrude your thread, just wanna know if any of u guys did install sleeve/liner in your block, to be specific just one out of that 4 cylinder, did it affect anything, just want to know ur exp.

thanks.
eastwest
post Aug 20 2014, 11:23 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(jctasoga @ Aug 18 2014, 10:15 AM)
stuff it with foam... or auto foam or replace all mountings smile.gif
*
Most of the rattling sound will gone/minimize if the car driven under hot condition. sweat.gif
jctasoga
post Aug 20 2014, 12:02 PM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
haha.. then keep it hawt! tongue.gif
eastwest
post Aug 25 2014, 10:46 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(jctasoga @ Aug 20 2014, 12:02 PM)
haha.. then keep it hawt! tongue.gif
*
sweat.gif
jctasoga
post Aug 25 2014, 11:54 AM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
going to send my car in for EO change and also abs checking. on and off lights on... T_T
eastwest
post Aug 25 2014, 11:58 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(jctasoga @ Aug 25 2014, 11:54 AM)
going to send my car in for EO change and also abs checking. on and off lights on... T_T
*
sounds found. lol tongue.gif

sent to SC?
jctasoga
post Aug 25 2014, 12:06 PM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
haha... not sure yet. need to go checking. no more SC coz quite expensive and out of my usual travel path. so went to a local mech.

wanna go stiff rings too! hahaha
ajaibman
post Aug 25 2014, 05:43 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
Just to share with you guys.. 2 weeks ago.. i have a "brief" encounter for abt half a day with the new Proton GSC...

However I cant say a word abt the review.. until next week, as they have problem on lots of info leaks in the internet now..
surefire v LED
post Aug 25 2014, 09:54 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
QUOTE(ajaibman @ Aug 25 2014, 05:43 PM)
Just to share with you guys.. 2 weeks ago.. i have a "brief" encounter for abt half a day with the new Proton GSC...

However I cant say a word abt the review.. until next week, as they have problem on lots of info leaks in the internet now..
*
Sedap tak EPS dia?
jctasoga
post Aug 26 2014, 08:25 AM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
*hold ur breath*
eastwest
post Aug 26 2014, 09:01 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(ajaibman @ Aug 25 2014, 05:43 PM)
Just to share with you guys.. 2 weeks ago.. i have a "brief" encounter for abt half a day with the new Proton GSC...

However I cant say a word abt the review.. until next week, as they have problem on lots of info leaks in the internet now..
*
since you cannot say anything about it, why don't u just write/type it? LOL laugh.gif
eastwest
post Aug 26 2014, 09:02 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
currently how many members here still driving cps?

This post has been edited by eastwest: Aug 26 2014, 09:03 AM
ajaibman
post Aug 26 2014, 10:02 AM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(surefire v LED @ Aug 25 2014, 09:54 PM)
Sedap tak EPS dia?
*
EPS mana ada sedap.. feel disconnected dgn tayar smile.gif.. but overall OK not that muted feeling, still got some feedback felt on the steering wheel..
marzuk88
post Aug 26 2014, 10:03 AM

New Member
*
Newbie
0 posts

Joined: Jul 2012
still own a cps, but the car were parked most of the time...I only take her out on the weekend to do groceries and have bfast with wifey..hehe
ajaibman
post Aug 26 2014, 10:08 AM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(eastwest @ Aug 26 2014, 09:01 AM)
since you cannot say anything about it, why don't u just write/type it? LOL laugh.gif
*
Already typed on some of my FB page.. but kena sound by Proton right after sad.gif maybe I am neutral observer by giving plus n minus..

Note : the car that I "supposed" to be test driven, was lanyak kaw2 until the engine check light was on.. The proton guy just shake their head when I "supposed" to be handed the key after..
jctasoga
post Aug 26 2014, 11:23 AM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
confirmed circuitry inside the abs pump module got issue. but strangely the lights have been off for a while now. the mech tried to clean the connectors and see if it works. to test drive for a few weeks to see how it is.

if it comes back, i will have to change the pump module. u guys driving with abs-less CPS feel like the normal car without abs only right? the abs won't be funny with u when driving right? i'm a bit paranoid with driving faulty car.
eastwest
post Aug 26 2014, 04:18 PM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(jctasoga @ Aug 26 2014, 11:23 AM)
confirmed circuitry inside the abs pump module got issue. but strangely the lights have been off for a while now. the mech tried to clean the connectors and see if it works. to test drive for a few weeks to see how it is.

if it comes back, i will have to change the pump module. u guys driving with abs-less CPS feel like the normal car without abs only right? the abs won't be funny with u when driving right? i'm a bit paranoid with driving faulty car.
*
I heard some people say your abs-less car will be much faster from now on... tongue.gif

shouldn't be a problem.... just have to get used to it...
jctasoga
post Aug 26 2014, 04:34 PM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
ok boss!
surefire v LED
post Aug 26 2014, 04:37 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
QUOTE(eastwest @ Aug 26 2014, 04:18 PM)
I heard some people say your abs-less car will be much faster from now on... tongue.gif

shouldn't be a problem.... just have to get used to it...
*
bahaya oo whistling.gif
eastwest
post Aug 26 2014, 04:52 PM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(jctasoga @ Aug 26 2014, 04:34 PM)
ok boss!
*
since abs not working, the ebd will also not work (I think)... most probably when u do hard brake, it will feel like the front brake much more powerful than those at the back...

QUOTE(surefire v LED @ Aug 26 2014, 04:37 PM)
bahaya oo  whistling.gif
*
dangerouessssesss...
eastwest
post Aug 26 2014, 04:54 PM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(ajaibman @ Aug 26 2014, 10:08 AM)
Already typed on some of my FB page.. but kena sound by Proton right after  sad.gif  maybe I am neutral observer by giving plus n minus..

Note : the car that I "supposed" to be test driven, was lanyak kaw2 until the engine check light was on..  The proton guy just shake their head when I "supposed" to be handed the key after..
*
when is the estimated launch date?
ajaibman
post Aug 26 2014, 04:58 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(eastwest @ Aug 26 2014, 04:54 PM)
when is the estimated launch date?
*
25th September..
eastwest
post Aug 26 2014, 04:59 PM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(ajaibman @ Aug 26 2014, 04:58 PM)
25th September..
*
thumbup.gif
ajaibman
post Aug 26 2014, 05:39 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
Want to let go my Exora CPS .. if anyone interested PM me smile.gif
marzuk88
post Aug 26 2014, 06:01 PM

New Member
*
Newbie
0 posts

Joined: Jul 2012
Wah so fast nak let go, all package included?
ahpaul82
post Aug 26 2014, 07:20 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(ajaibman @ Aug 26 2014, 05:39 PM)
Want to let go my Exora CPS .. if anyone interested PM me smile.gif
*
I tak mao Exora,
I mao Supercharger Kit jeh.. laugh.gif
eastwest
post Aug 27 2014, 09:36 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(ajaibman @ Aug 26 2014, 05:39 PM)
Want to let go my Exora CPS .. if anyone interested PM me smile.gif
*
trade in for new proton thumbup.gif
ajaibman
post Aug 27 2014, 10:27 AM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(marzuk88 @ Aug 26 2014, 06:01 PM)
Wah so fast nak let go, all package included?
*
http://www.mudah.my/Proton+Exora+A+CPS+M+L...3219.htm?last=1
ajaibman
post Aug 27 2014, 10:39 AM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(eastwest @ Aug 27 2014, 09:36 AM)
trade in for new proton thumbup.gif
*
Want to change into Hot Hatch..
ajaibman
post Aug 29 2014, 10:15 AM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
I did "ehm" with PCC in Tg Malim.. 3 weeks ago..

The information fairley accurate.. just want to add things since "someone already leaks it"

1. ESC, TCS, HBA, HHA I have tried by doing 80 km/h and performing sudden turn on wet and sandy road tarmac condition... the car will auto adjust the torque channeled to each wheel.. in layman terms.. basically you can't turtle this car unless extra ordinary condition such as 3rd party factor or botak tayar...

2. Perform 120km/h turning on non sloped corner road (if someone inside Proton will know which test track I "ehm" to).. when the ecu detect one of the wheel start to loose the grip (under steer) will limit the throttle opening...

3. Good braking system eventhough all variant will have drum brakes @ the back.. quite responsive and decent braking power.. without the car dived too much to the front..

4. Slow acceleration for 1.6 variant, the engine shoot up to 5.5 to 6k Rpm just to get it off the line and speeds off

5. CVT2+ still showing juddering when on lower speed rolls.. perhaps this is just tuning problem....

6. for the 1.3 manual and even the CVT version showing better acceleration compare to the more premium model 1.6 CVT...

7. The seat was giving good lumbar support for driver and passanger similar with Preve and Suprima design.. (you will not get thrown here and there that much when layan bukit putus Touge) but don't expect bride or recaro quality..

8. Rear seat was have a good elevation for your back.. and decent leg room for someone 170 cm and above.

9. Spare tayar is the standard small emergency running sotong tayar.. no full size tayar..available for all variant

10. Proton engineer claimed can reach 200 km/h but I only managed to get top 140km/h on that test track, tested until the engine check light on.. still cant get the claimed speed.. (aside the lethargic acceleration from the 1.6 version)...

11. M line and H line will have touch screen HU however the difference is, the M line will only have visual parking sensor similar with BMW and the H line will have rear view camera and front parking sensor. ..

12. Engine roar still sounds bad in the cabin.. similar with current Campro CPS generation engine sound, when it roars the entire passengers will know you are speeding..

13. NVH not bad.. expected same quality as Suprima S, however the engine sound is the only nuisances, especially when you cruising on the highway i guess..

14. Body panel still expect similar like Suprima S, Hard plastic everywhere but @ least now they making it look expensive and black color interior...

15. H line will have leather seats, gear knob, side panel, and steering wheel wrap.

16. HID only on the H line with projector light.. the M and S line will have reflector type headlight..


I may missed some of the things perhaps will add on later when I remembered smile.gif
eastwest
post Aug 29 2014, 04:51 PM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(ajaibman @ Aug 29 2014, 10:15 AM)
I did "ehm" with PCC  in Tg Malim.. 3 weeks ago..

The information fairley accurate.. just want to add things since "someone already leaks it"

1. ESC, TCS, HBA, HHA I have tried by doing 80 km/h and performing sudden turn on wet and sandy road tarmac condition... the car will auto adjust the torque channeled to each wheel.. in layman terms.. basically you can't turtle this car unless extra ordinary condition such as 3rd party factor or botak tayar...

2. Perform 120km/h turning on non sloped corner road (if someone inside Proton will know which test track I "ehm" to).. when the ecu detect one of the wheel start to loose the grip (under steer) will limit the throttle opening...

3. Good braking system eventhough all variant will have drum brakes @ the back.. quite responsive and decent braking power.. without the car dived too much to the front..

4. Slow acceleration for 1.6 variant, the engine shoot up to 5.5 to 6k Rpm just to get it off the line and speeds off

5. CVT2+ still showing juddering when on lower speed rolls.. perhaps this is just tuning problem....

6. for the 1.3 manual and even the CVT version showing better acceleration compare to the more premium model 1.6 CVT...

7. The seat was giving good lumbar support for driver and passanger similar with Preve and Suprima design.. (you will not get thrown here and there that much when layan bukit putus Touge) but don't expect bride or recaro quality..

8. Rear seat was have a good elevation for your back.. and decent leg room for someone 170 cm and above.

9. Spare tayar is the standard small emergency running sotong tayar.. no full size tayar..available for all variant

10. Proton engineer claimed can reach 200 km/h but I only managed to get top 140km/h on that test track, tested until the engine check light on.. still cant get the claimed speed.. (aside the lethargic acceleration from the 1.6 version)...

11. M line and H line will have touch screen HU however the difference is, the M line will only have visual parking sensor similar with BMW and the H line will have rear view camera and front parking sensor. ..

12. Engine roar still sounds bad in the cabin.. similar with current Campro CPS generation engine sound, when it roars the entire passengers will know you are speeding..

13. NVH not bad.. expected same quality as Suprima S, however the engine sound is the only nuisances, especially when you cruising on the highway i guess..

14. Body panel still expect similar like Suprima S, Hard plastic everywhere but @ least now they making it look expensive and black color interior...

15. H line will have leather seats, gear knob, side panel, and steering wheel wrap.

16. HID only on the H line with projector light.. the M and S line will have reflector type headlight..
I may missed some of the things perhaps will add on later when I remembered smile.gif
*
For nvh, compared to Honda city, how good? only test drive preve previously...
Azuma-kun
post Aug 29 2014, 04:52 PM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
1.6 acceleration hmmm....
fazron80
post Aug 30 2014, 07:50 PM

New Member
*
Junior Member
27 posts

Joined: Oct 2007
QUOTE(ajaibman @ Aug 29 2014, 10:15 AM)
I did "ehm" with PCC  in Tg Malim.. 3 weeks ago..

The information fairley accurate.. just want to add things since "someone already leaks it"

1. ESC, TCS, HBA, HHA I have tried by doing 80 km/h and performing sudden turn on wet and sandy road tarmac condition... the car will auto adjust the torque channeled to each wheel.. in layman terms.. basically you can't turtle this car unless extra ordinary condition such as 3rd party factor or botak tayar...

2. Perform 120km/h turning on non sloped corner road (if someone inside Proton will know which test track I "ehm" to).. when the ecu detect one of the wheel start to loose the grip (under steer) will limit the throttle opening...

3. Good braking system eventhough all variant will have drum brakes @ the back.. quite responsive and decent braking power.. without the car dived too much to the front..

4. Slow acceleration for 1.6 variant, the engine shoot up to 5.5 to 6k Rpm just to get it off the line and speeds off

5. CVT2+ still showing juddering when on lower speed rolls.. perhaps this is just tuning problem....

6. for the 1.3 manual and even the CVT version showing better acceleration compare to the more premium model 1.6 CVT...

7. The seat was giving good lumbar support for driver and passanger similar with Preve and Suprima design.. (you will not get thrown here and there that much when layan bukit putus Touge) but don't expect bride or recaro quality..

8. Rear seat was have a good elevation for your back.. and decent leg room for someone 170 cm and above.

9. Spare tayar is the standard small emergency running sotong tayar.. no full size tayar..available for all variant

10. Proton engineer claimed can reach 200 km/h but I only managed to get top 140km/h on that test track, tested until the engine check light on.. still cant get the claimed speed.. (aside the lethargic acceleration from the 1.6 version)...

11. M line and H line will have touch screen HU however the difference is, the M line will only have visual parking sensor similar with BMW and the H line will have rear view camera and front parking sensor. ..

12. Engine roar still sounds bad in the cabin.. similar with current Campro CPS generation engine sound, when it roars the entire passengers will know you are speeding..

13. NVH not bad.. expected same quality as Suprima S, however the engine sound is the only nuisances, especially when you cruising on the highway i guess..

14. Body panel still expect similar like Suprima S, Hard plastic everywhere but @ least now they making it look expensive and black color interior...

15. H line will have leather seats, gear knob, side panel, and steering wheel wrap.

16. HID only on the H line with projector light.. the M and S line will have reflector type headlight..
I may missed some of the things perhaps will add on later when I remembered smile.gif
*
Enjin campro biasa? or what engine?
surefire v LED
post Sep 2 2014, 06:03 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
aku punya seat belts dua² kat depan dah locked - tak boleh tarik !
Mcm mana nak repair?
fazron80
post Sep 2 2014, 10:56 PM

New Member
*
Junior Member
27 posts

Joined: Oct 2007
QUOTE(surefire v LED @ Sep 2 2014, 06:03 PM)
aku punya seat belts dua² kat depan dah locked - tak boleh tarik !
Mcm mana nak repair?
*
bukak cover dia tgk sangkut kat mana.
hickups
post Sep 18 2014, 12:35 AM

Casual
***
Junior Member
477 posts

Joined: Jan 2003
From: Klang
bros macam mana nak tau airbag functioning or not..or inside really got airbag or been deployed b4?? send to proton??
Azuma-kun
post Sep 18 2014, 12:57 AM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
Try head-on collision. Kalo terbukak, means airbag is functional. Kalo tak keluar, airbag maybe rosak or die ok tp sensor problem.
jctasoga
post Sep 18 2014, 09:45 AM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
azuma-kun : bad boy... u need some spanking XD

hickups : no way to know if it works. just need to know that all the sensors are working and pray that the airbag deploys when really needed. the computer that they plug in shld be able to diagnose any issues. however, dun take my word for it. need other sifus to chip in.

cheers.
R.Y.D.E.C.K
post Sep 18 2014, 10:20 AM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(hickups @ Sep 18 2014, 12:35 AM)
bros macam mana nak tau airbag functioning or not..or inside really got airbag or been deployed b4?? send to proton??
*
at steering we cant tell coz they will change new cover but on dashboard we can see they re-skin back the surface..easy

you can see the steering cover is explode and these parts is changeable..the dashboard they re-skin..90% look new..

This post has been edited by R.Y.D.E.C.K: Sep 18 2014, 10:24 AM


Attached thumbnail(s)
Attached Image
jctasoga
post Sep 18 2014, 11:35 AM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
rydeck : tats bad.. 2 bags were deployed... where do u think the sensors are located?
R.Y.D.E.C.K
post Sep 18 2014, 12:23 PM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(jctasoga @ Sep 18 2014, 11:35 AM)
rydeck : tats bad.. 2 bags were deployed... where do u think the sensors are located?
*
front got 3 sensor..each on at top back of the fog lamp and one under the safety bar on radiator..tis on waja.
hickups
post Sep 18 2014, 04:49 PM

Casual
***
Junior Member
477 posts

Joined: Jan 2003
From: Klang
QUOTE(R.Y.D.E.C.K @ Sep 18 2014, 10:20 AM)
at steering we cant tell coz they will change new cover but on dashboard we can see they re-skin back the surface..easy

you can see the steering cover is explode and these parts is changeable..the dashboard they re-skin..90% look new..
*
do i need to be worried because i bought car from 2nd dealer...and i dont know wheater theres airbag in it or not..during inspection puspakom does check all this right?
hickups
post Sep 18 2014, 09:16 PM

Casual
***
Junior Member
477 posts

Joined: Jan 2003
From: Klang
QUOTE(Azuma-kun @ Sep 18 2014, 12:57 AM)
Try head-on collision. Kalo terbukak, means airbag is functional. Kalo tak keluar, airbag maybe rosak or die ok tp sensor problem.
*
biggrin.gif biggrin.gif biggrin.gif good idea
jctasoga
post Sep 19 2014, 08:10 AM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
QUOTE(R.Y.D.E.C.K @ Sep 18 2014, 12:23 PM)
front got 3 sensor..each on at top back of the fog lamp and one under the safety bar on radiator..tis on waja.
*
i see! i had a minor accident 2 years back with the motorbike swiping across my front bumper. the machine went under and got stuck. it took out my driver side spotlight but another side is intact. I'm not sure about the sensors being behind spotlight (maybe not directly) but i suspect it needs at least 2 sensors to commence the airbag deployment or the sensor could be on the chassis (located behind the spotlight).

anyway, lucky it didn't go off.... blardy motorbike overtaking at junction... sigh...
Max
post Sep 19 2014, 10:41 AM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
QUOTE(jctasoga @ Sep 19 2014, 08:10 AM)
i see! i had a minor accident 2 years back with the motorbike swiping across my front bumper. the machine went under and got stuck. it took out my driver side spotlight but another side is intact. I'm not sure about the sensors being behind spotlight (maybe not directly) but i suspect it needs at least 2 sensors to commence the airbag deployment or the sensor could be on the chassis (located behind the spotlight).

anyway, lucky it didn't go off.... blardy motorbike overtaking at junction... sigh...
*
for NEO, if im not mistaken, the SRS Airbag sensor located behind the bumper bar. attached to the bar mounting to the car chassis.
R.Y.D.E.C.K
post Sep 19 2014, 11:17 AM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(hickups @ Sep 18 2014, 04:49 PM)
do i need to be worried because i bought car from 2nd dealer...and i dont know wheater theres airbag in it or not..during inspection puspakom does check all this right?
*
take ur dash pic + steering post here..

QUOTE(jctasoga @ Sep 19 2014, 08:10 AM)
i see! i had a minor accident 2 years back with the motorbike swiping across my front bumper. the machine went under and got stuck. it took out my driver side spotlight but another side is intact. I'm not sure about the sensors being behind spotlight (maybe not directly) but i suspect it needs at least 2 sensors to commence the airbag deployment or the sensor could be on the chassis (located behind the spotlight).

anyway, lucky it didn't go off.... blardy motorbike overtaking at junction... sigh...
*
airbags sensor need certain impact hit (forgot the measure) slowpoke impact@unnecessary impact did not trigger the sensor..
jctasoga
post Sep 19 2014, 11:39 AM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
thnx boss rydeck!
y4ng
post Sep 19 2014, 09:53 PM

Kambing Lembu
****
Junior Member
639 posts

Joined: Oct 2007
Exhaust dilemma

Neo cps manual

1.mfa 145?
2.kweng84?
3.powerzone?
4.exss?

Runsing kerana wang haha
Max
post Sep 20 2014, 01:14 PM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
QUOTE(y4ng @ Sep 19 2014, 09:53 PM)
Exhaust dilemma

Neo cps manual

1.mfa 145?
2.kweng84?
3.powerzone?
4.exss?

Runsing kerana wang haha
*
heard good feedback on powerzone header.
planning to install in future.. heheh tongue.gif
nightzstar
post Sep 22 2014, 11:34 AM

Col. Samantha Carter
*******
Senior Member
2,702 posts

Joined: Dec 2004
From: P8X-86A
btw, wanna ask waja cps tepet sound problem is really common eh among waja? thks
y4ng
post Sep 22 2014, 12:29 PM

Kambing Lembu
****
Junior Member
639 posts

Joined: Oct 2007
QUOTE(Max @ Sep 20 2014, 01:14 PM)
heard good feedback on powerzone header.
planning to install in future.. heheh  tongue.gif
*
i read somewhere it cracks as well...cos it is not stainless steel?
R.Y.D.E.C.K
post Sep 22 2014, 01:03 PM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(nightzstar @ Sep 22 2014, 11:34 AM)
btw, wanna ask waja cps tepet sound problem is really common eh among waja? thks
*
tepet sound brings few meaning..try go check if the sound obvious than your normal neighbor..
nightzstar
post Sep 22 2014, 01:54 PM

Col. Samantha Carter
*******
Senior Member
2,702 posts

Joined: Dec 2004
From: P8X-86A
QUOTE(R.Y.D.E.C.K @ Sep 22 2014, 01:03 PM)
tepet sound brings few meaning..try go check if the sound obvious than your normal neighbor..
*
lol, i see. because i was comparing waja 4g18 and waja cps. don't know if it is worth it other than the better interior and less stupid problem than the 4g18. i guess newer cps version is better than the 4g18 version.
ajaibman
post Sep 22 2014, 02:17 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(y4ng @ Sep 19 2014, 09:53 PM)
Exhaust dilemma

Neo cps manual

1.mfa 145?
2.kweng84?
3.powerzone?
4.exss?

Runsing kerana wang haha
*
you posted in Campro Lover group as well?

I am using Kweng84 from Kaki exhaust.. so far cap ayam not bad..
Max
post Sep 22 2014, 02:58 PM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
QUOTE(y4ng @ Sep 22 2014, 12:29 PM)
i read somewhere it cracks as well...cos it is not stainless steel?
*
i didnt hear about powerzone header crack.. unsure.gif
but superstreet found many complain about the header crack.. hmm.gif
y4ng
post Sep 22 2014, 06:31 PM

Kambing Lembu
****
Junior Member
639 posts

Joined: Oct 2007
QUOTE(ajaibman @ Sep 22 2014, 02:17 PM)
you posted in Campro Lover group as well?

I am using Kweng84 from Kaki exhaust.. so far cap ayam not bad..
*
haha yeah FB as well asking this question, cos really want to get a system that works alright

kweng84 good enough? im afraid lost of power and FC
ajaibman
post Sep 22 2014, 09:14 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(y4ng @ Sep 22 2014, 06:31 PM)
haha yeah FB as well asking this question, cos really want to get a system that works alright

kweng84 good enough? im afraid lost of power and FC
*
Depends on your setup

1. Manual, Auto?
2. Mods made on the current engine?
3. Torque linear power band or Top speed?
4. How loud you want?


My setup.. standard CPS Auto on Exora

1. Using kweng84 universal 4-2-1 extractor
2. Tayar 16 inch
3. S-Flow muffler
4. 2 mid-box to replace backpressure lost by taking out the Catalyc Converter



Other mods made (not related to power and add extra weight into the car)

1. DVD player with GPS
2. 2 Power amp with 12 inch sub box
3. Tinted
4. Sprintex
5. Third blinking brake light from Brothers
6. Rear spoiler
7. Haltech 500

The cap ayam extractor still running strong and not cracked until now (Touch woods)

This post has been edited by ajaibman: Sep 22 2014, 09:15 PM
y4ng
post Sep 22 2014, 10:41 PM

Kambing Lembu
****
Junior Member
639 posts

Joined: Oct 2007
QUOTE(ajaibman @ Sep 22 2014, 09:14 PM)
Depends on your setup

1. Manual, Auto?
2. Mods made on the current engine?
3. Torque linear power band or Top speed?
4. How loud you want?
My setup.. standard CPS Auto on Exora

1. Using kweng84 universal 4-2-1 extractor
2. Tayar 16 inch
3. S-Flow muffler
4. 2 mid-box to replace backpressure lost by taking out the Catalyc Converter
Other mods made (not related to power and add extra weight into the car)

1. DVD player with GPS
2. 2 Power amp with 12 inch sub box
3. Tinted
4. Sprintex
5. Third blinking brake light from Brothers
6. Rear spoiler
7. Haltech 500

The cap ayam extractor still running strong and not cracked until now (Touch woods)
*
If i have cash sprintex would be nice hahah

Im aiming torque as nt muc area can go top speed..
I have erm mythelogy, drop in filter for engine part nia

Kweng84? Doubt sometimes =/ i need someone with manual cps neo to compare
peejayboy
post Sep 23 2014, 05:18 PM

New Member
*
Newbie
1 posts

Joined: Apr 2012
QUOTE(y4ng @ Sep 19 2014, 09:53 PM)
Exhaust dilemma

Neo cps manual

1.mfa 145?
2.kweng84?
3.powerzone?
4.exss?

Runsing kerana wang haha
*
5. R3/Tonnka thumbup.gif

so far i never hear ppl say R3/tonnka exhaust crack before...
fazron80
post Sep 24 2014, 01:18 AM

New Member
*
Junior Member
27 posts

Joined: Oct 2007
QUOTE(y4ng @ Sep 22 2014, 10:41 PM)
If i have cash sprintex would be nice hahah

Im aiming torque as nt muc area can go top speed..
I have erm mythelogy, drop in filter for engine part nia

Kweng84? Doubt sometimes =/ i need someone with manual cps neo to compare
*
money no problem? go to everco sunway
y4ng
post Sep 24 2014, 10:25 PM

Kambing Lembu
****
Junior Member
639 posts

Joined: Oct 2007
Money always problem hah
surefire v LED
post Sep 25 2014, 10:25 AM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
@ Proton Edar.
Total damage = RM217.50
1.Check ABS error - nil & retune back.
2. Change head gasket - leaking due to head gasket sudah keras dan mati.
3. Request to change parking light bulb - not the same like the one from factory hence no changing.

Some eye candies.
» Click to show Spoiler - click again to hide... «
eastwest
post Sep 25 2014, 11:35 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(ajaibman @ Sep 22 2014, 09:14 PM)
Depends on your setup

1. Manual, Auto?
2. Mods made on the current engine?
3. Torque linear power band or Top speed?
4. How loud you want?
My setup.. standard CPS Auto on Exora

1. Using kweng84 universal 4-2-1 extractor
2. Tayar 16 inch
3. S-Flow muffler
4. 2 mid-box to replace backpressure lost by taking out the Catalyc Converter
Other mods made (not related to power and add extra weight into the car)

1. DVD player with GPS
2. 2 Power amp with 12 inch sub box
3. Tinted
4. Sprintex
5. Third blinking brake light from Brothers
6. Rear spoiler
7. Haltech 500

The cap ayam extractor still running strong and not cracked until now (Touch woods)
*
what does bold part mean?
eastwest
post Sep 25 2014, 11:42 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(R.Y.D.E.C.K @ Sep 18 2014, 10:20 AM)
at steering we cant tell coz they will change new cover but on dashboard we can see they re-skin back the surface..easy

you can see the steering cover is explode and these parts is changeable..the dashboard they re-skin..90% look new..
*
whose car in the pic?

QUOTE(R.Y.D.E.C.K @ Sep 18 2014, 12:23 PM)
front got 3 sensor..each on at top back of the fog lamp and one under the safety bar on radiator..tis on waja.
*
last year I hit a "standing" wood which broke the left indicator lamp and also the bracket holding the fog lamp. Will it affect the sensor? how to check if it still working properly? (other than doing a head-on collision suggested by zuma laugh.gif ).
R.Y.D.E.C.K
post Sep 25 2014, 11:56 AM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(eastwest @ Sep 25 2014, 11:42 AM)
whose car in the pic?
last year I hit a "standing" wood which broke the left indicator lamp and also the bracket holding the fog lamp. Will it affect the sensor? how to check if it still working properly? (other than doing a head-on collision suggested by zuma laugh.gif ).
*
pic?source internet laugh.gif not power enuf to trigger the sensor....
ajaibman
post Sep 25 2014, 11:56 AM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(eastwest @ Sep 25 2014, 11:35 AM)
what does bold part mean?
*
Some extractor designed to have good linear powerband on certain RPM.. my cap ayam Kweng's one has design in which it bended as soon leaving the exhaust port from the engine.. while the R3 version has more straight longer pipe before bend downwards (nearer to the Radiator)... This setting better for manual car even though both extractor are 4-2-1 in design..

jctasoga
post Sep 25 2014, 12:00 PM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
too close to radiator will melt the fan... that was wat happen to my old wira when using a 4-2-1 header which is close to the radiator fan... T_T
eastwest
post Sep 25 2014, 01:17 PM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(R.Y.D.E.C.K @ Sep 25 2014, 11:56 AM)
pic?source internet  laugh.gif  not power enuf to trigger the sensor....
*
I mean if the sensor still working or no longer in good condition... tongue.gif

QUOTE(ajaibman @ Sep 25 2014, 11:56 AM)
Some extractor designed to have good linear powerband on certain RPM.. my cap ayam Kweng's one has design in which it bended as soon leaving the exhaust port from the engine.. while the R3 version has more straight longer pipe before bend downwards (nearer to the Radiator)... This setting better for manual car even though both extractor are 4-2-1 in design..
*
what about the standard setup?
ajaibman
post Sep 25 2014, 04:02 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(eastwest @ Sep 25 2014, 01:17 PM)
I mean if the sensor still working or no longer in good condition... tongue.gif
what about the standard setup?
*
Thats the worst setup smile.gif directly bend down and blocked with the big Cat Con ..
R.Y.D.E.C.K
post Sep 25 2014, 04:54 PM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(eastwest @ Sep 25 2014, 01:17 PM)
I mean if the sensor still working or no longer in good condition... tongue.gif
what about the standard setup?
*
its a one way..once trigger need to change it
eastwest
post Sep 26 2014, 09:18 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(ajaibman @ Sep 25 2014, 04:02 PM)
Thats the worst setup smile.gif directly bend down and blocked with the big Cat Con ..
*
dem, I'm using the worst setup cry.gif

QUOTE(R.Y.D.E.C.K @ Sep 25 2014, 04:54 PM)
its a one way..once trigger need to change it
*
icon_rolleyes.gif
ajaibman
post Sep 26 2014, 10:38 AM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(eastwest @ Sep 26 2014, 09:18 AM)
dem, I'm using the worst setup cry.gif
icon_rolleyes.gif
*
Loose some for the environment...
eastwest
post Sep 29 2014, 04:09 PM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(ajaibman @ Sep 26 2014, 10:38 AM)
Loose some for the environment...
*
how much exactly? hmm.gif
ajaibman
post Sep 29 2014, 04:44 PM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
QUOTE(eastwest @ Sep 29 2014, 04:09 PM)
how much exactly? hmm.gif
*
According to the proton engineer.. 10 to 15% loss.... so if you change the extractor, can claim those 10 to 15 % power back..
ahpaul82
post Sep 30 2014, 12:40 AM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
Eventually got this from Alami PROTON Event at COE last Sunday...

wub.gif
Attached Image
jctasoga
post Sep 30 2014, 06:39 AM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
R3 ball? what is it for? smile.gif
eastwest
post Sep 30 2014, 09:02 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
throw at someone tongue.gif
jctasoga
post Sep 30 2014, 10:23 AM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
self defense mechanism! i like....
ajaibman
post Sep 30 2014, 11:13 AM

Getting Started
**
Junior Member
233 posts

Joined: Jun 2007
the ball+ Airsoft gun.. = lethal smile.gif

eastwest
post Sep 30 2014, 11:20 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
just the ball itself is enough to cause 'heavy' damage... sweat.gif
ahpaul82
post Sep 30 2014, 10:54 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
Is a Gear Knob lah... sweat.gif

Attached Image
eastwest
post Oct 1 2014, 09:27 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
LOL laugh.gif u so late reply, we have to speculate...hahaa

Steel item? will be cold in the morning?
R.Y.D.E.C.K
post Oct 1 2014, 11:33 AM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(ahpaul82 @ Sep 30 2014, 10:54 PM)
Is a Gear Knob lah...  sweat.gif

Attached Image
*
paul how much? drool.gif

ahpaul82
post Oct 1 2014, 02:03 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(R.Y.D.E.C.K @ Oct 1 2014, 11:33 AM)
paul how much? drool.gif
*
List Price RM159,

after 35% discount is RM104.

Attached Image
ahpaul82
post Oct 1 2014, 02:04 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(eastwest @ Oct 1 2014, 09:27 AM)
LOL laugh.gif  u so late reply, we have to speculate...hahaa

Steel item? will be cold in the morning?
*
is an Aluminium material,
belum pasang lagi,
but I believe it will feel hot during noon time tongue.gif
R.Y.D.E.C.K
post Oct 1 2014, 02:25 PM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(ahpaul82 @ Oct 1 2014, 02:04 PM)
is an Aluminium material,
belum pasang lagi,
but I believe it will feel hot during noon time tongue.gif
*
hot pursuit surely hot... laugh.gif laugh.gif cheap!! thumbup.gif
The Red Giant Warrior
post Oct 2 2014, 03:47 PM

New Member
*
Junior Member
13 posts

Joined: Oct 2012
From: Kuala Lumpur
QUOTE(ahpaul82 @ Sep 30 2014, 12:40 AM)
Eventually got this from Alami PROTON Event at COE last Sunday... 

wub.gif
Attached Image
*
Nice gear knob thumbup.gif Too bad my car is auto, if not sure I buy this knob oso cry.gif But I do bought that R3 Limited edition black rims at Event last Sunday brows.gif
brewoe_1988
post Oct 2 2014, 04:15 PM

Getting Started
**
Junior Member
175 posts

Joined: Mar 2006
guys how much to convert auto to manual..mine auto seems having abit problem shifting not smooth...
marzuk88
post Oct 3 2014, 07:57 AM

New Member
*
Newbie
0 posts

Joined: Jul 2012
I did swap with a chap i found in mudah. I only pay for labor..It costs me rm600, fluids included. Make sure if u want to do swap, find the same model (wiring gen2 x sama mcm neo)
brewoe_1988
post Oct 3 2014, 09:31 AM

Getting Started
**
Junior Member
175 posts

Joined: Mar 2006
QUOTE(marzuk88 @ Oct 3 2014, 07:57 AM)
I did swap with a chap i found in mudah. I only pay for labor..It costs me rm600, fluids included. Make sure if u want to do swap, find the same model (wiring gen2 x sama mcm neo)
*
bro you know how much to replace gearbox 2nd hand? advisable to do so?
eastwest
post Oct 8 2014, 09:34 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(The Red Giant Warrior @ Oct 2 2014, 03:47 PM)
Nice gear knob  thumbup.gif  Too bad my car is auto, if not sure I buy this knob oso  cry.gif But I do bought that R3 Limited edition black rims at Event last Sunday  brows.gif
*
16 inch?
R.Y.D.E.C.K
post Oct 8 2014, 09:55 AM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(brewoe_1988 @ Oct 3 2014, 09:31 AM)
bro you know how much to replace gearbox 2nd hand? advisable to do so?
*
in Marzuk case that fella had a very healthy GB just that he wanted to swap with AT GB..soo a to z is complete for marzuk car and his. ur GB ady brings some problems (pls correct me) soo its difficult to swap with others.if u looking for used GB that quite a challenge as the cost surely high.. 2ndhand Gb + handling + rebuild + workshop cost + mini tiny things.

QUOTE(eastwest @ Oct 8 2014, 09:34 AM)
16 inch?
*
all R3 comes 16" except elpiraloy R3 is 18" sweat.gif sweat.gif
eastwest
post Oct 8 2014, 10:13 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(R.Y.D.E.C.K @ Oct 8 2014, 09:55 AM)
in Marzuk case that fella had a very healthy GB just that he wanted to swap with AT GB..soo a to z is complete for marzuk car and his. ur GB ady brings some problems (pls correct me) soo its difficult to swap with others.if u looking for used GB that quite a challenge as the cost surely high.. 2ndhand Gb + handling + rebuild + workshop cost + mini tiny things.
all R3 comes 16" except elpiraloy R3 is 18"  sweat.gif  sweat.gif
*
oooohhh.. I see...

btw, those who have waja, u guys change the radiator hose?
R.Y.D.E.C.K
post Oct 8 2014, 10:17 AM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(eastwest @ Oct 8 2014, 10:13 AM)
oooohhh.. I see...

btw, those who have waja, u guys change the radiator hose?
*
no need..hardly see the hose is leaking or heard any problems on it..if the radiators yess..
eastwest
post Oct 8 2014, 10:26 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(R.Y.D.E.C.K @ Oct 8 2014, 10:17 AM)
no need..hardly see the hose is leaking or heard any problems on it..if the radiators yess..
*
my car already 191k km.... sa suggested if have money, change it.... I will check first if the hose made the 'biskut pecah' sound...
R.Y.D.E.C.K
post Oct 8 2014, 10:37 AM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(eastwest @ Oct 8 2014, 10:26 AM)
my car already 191k km.... sa suggested if have money, change it.... I will check first if the hose made the 'biskut pecah' sound...
*
but no harm to do that..191k km is far...just do it..
eastwest
post Oct 8 2014, 10:48 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(R.Y.D.E.C.K @ Oct 8 2014, 10:37 AM)
but no harm to do that..191k km is far...just do it..
*
yup, never thought about the hose, until sa mentioned about it to me yesterday....

thing to do:
brake pad
exhaust muffler
engine mounting (maybe)
hose + clean radiator
alignment + balancing + rotation

which brake pad is good? at least as good as the stock pad.... I prefer those that will not 'harm' the disc rotor....
surefire v LED
post Oct 8 2014, 03:19 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
Now i know why my bonet turn into a mini pool if it is heavily rain doh.gif

» Click to show Spoiler - click again to hide... «


I had to add some salotape laugh.gif

» Click to show Spoiler - click again to hide... «
eastwest
post Oct 8 2014, 03:37 PM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(surefire v LED @ Oct 8 2014, 03:19 PM)
Now i know why my bonet turn into a mini pool if it is heavily rain  doh.gif

» Click to show Spoiler - click again to hide... «


I had to add some salotape  laugh.gif

» Click to show Spoiler - click again to hide... «

*
same problem like my car few years back.... menthol bracket cair.... water flow into the spare tyre part.... mechanic seal back that part...
surefire v LED
post Oct 8 2014, 03:42 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
QUOTE(eastwest @ Oct 8 2014, 03:37 PM)
same problem like my car few years back.... menthol bracket cair.... water flow into the spare tyre part.... mechanic seal back that part...
*
I seal it on my own - the worst thing is it happened to both side doh.gif
Now the bulbs just snug fit into that hole doh.gif
Need to find ways to solve this issue ASAP sweat.gif - tired now.
The Red Giant Warrior
post Oct 8 2014, 03:52 PM

New Member
*
Junior Member
13 posts

Joined: Oct 2012
From: Kuala Lumpur
QUOTE(eastwest @ Oct 8 2014, 09:34 AM)
16 inch?
*
Yup 16 inch smile.gif


QUOTE(R.Y.D.E.C.K @ Oct 8 2014, 09:55 AM)

all R3 comes 16" except elpiraloy R3 is 18"  sweat.gif  sweat.gif
*
R3 rims also got 15 inch and 17 inch. Or do you mean Satria Neo R3? If Neo then yes it comes with 16 inch smile.gif
R.Y.D.E.C.K
post Oct 8 2014, 04:18 PM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(The Red Giant Warrior @ Oct 8 2014, 03:52 PM)
Yup 16 inch  smile.gif
R3 rims also got 15 inch and 17 inch. Or do you mean Satria Neo R3? If Neo then yes it comes with 16 inch  smile.gif
*
Repost:
nowadays only got 15" & 17" ..before only available in 16" upgrade..since 15" for r3 savvy & 17" for preve..before these model born there are no 15 & 17" rims....and the 18" becoz its for eplira fitting as the stock ady come with 17"... yawn.gif

during savvy & waja the r3 rims also not available commercially..the only rims at that time is on the 1st satria r3 and still remember there`s a dude buying the satria r3 upgrade the rims to japan rim and selling the R3 rims only 4k nod.gif

This post has been edited by R.Y.D.E.C.K: Oct 8 2014, 04:21 PM
ahpaul82
post Oct 8 2014, 07:01 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(The Red Giant Warrior @ Oct 2 2014, 03:47 PM)
Nice gear knob  thumbup.gif  Too bad my car is auto, if not sure I buy this knob oso  cry.gif But I do bought that R3 Limited edition black rims at Event last Sunday  brows.gif
*
WoW,

then do you got your free gift? whistling.gif


QUOTE(surefire v LED @ Oct 8 2014, 03:19 PM)
Now i know why my bonet turn into a mini pool if it is heavily rain  doh.gif

» Click to show Spoiler - click again to hide... «


I had to add some salotape  laugh.gif

» Click to show Spoiler - click again to hide... «

*
My car top mount third brake lights also having hangus issue,
after changed to new set I have practice not to step brake for long time,
if long time just pull handbrake.
surefire v LED
post Oct 8 2014, 07:15 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
QUOTE(ahpaul82 @ Oct 8 2014, 07:01 PM)
WoW,

then do you got your free gift?  whistling.gif
My car top mount third brake lights also having hangus issue,
after changed to new set I have practice not to step brake for long time,
if long time just pull handbrake.
*
Yeah that's what i thot so sad.gif
The Red Giant Warrior
post Oct 8 2014, 08:49 PM

New Member
*
Junior Member
13 posts

Joined: Oct 2012
From: Kuala Lumpur
QUOTE(R.Y.D.E.C.K @ Oct 8 2014, 04:18 PM)
Repost:
nowadays only got 15" & 17" ..before only available in 16" upgrade..since 15" for r3 savvy & 17" for preve..before these model born there are no 15 & 17" rims....and the 18" becoz its for eplira fitting as the stock ady come with 17"...  yawn.gif

during savvy & waja the r3 rims also not available commercially..the only rims at that time is on the 1st satria r3 and still remember there`s a dude buying the satria r3 upgrade the rims to japan rim and selling the R3 rims only 4k  nod.gif
*
I see. Holy Pikachu shocking.gif 4k for R3 rims?? In your opinion, are R3 rims good?


QUOTE(ahpaul82 @ Oct 8 2014, 07:01 PM)
WoW,

then do you got your free gift?  whistling.gif
*
Got brows.gif got R3 umbrella and Proton Motorsports Beanie? Cap thumbup.gif oh and free balloon from awek R3 brows.gif

This post has been edited by The Red Giant Warrior: Oct 8 2014, 08:49 PM
ahpaul82
post Oct 8 2014, 11:43 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(The Red Giant Warrior @ Oct 8 2014, 08:49 PM)
Got  brows.gif got R3 umbrella and Proton Motorsports Beanie? Cap  thumbup.gif oh and free balloon from awek R3  brows.gif
*
I requested the R3 Umbrella but rejected laugh.gif laugh.gif laugh.gif

Should get the R3 ECU instead tongue.gif


Anyway just got the Beanie:

Attached Image
The Red Giant Warrior
post Oct 9 2014, 01:04 AM

New Member
*
Junior Member
13 posts

Joined: Oct 2012
From: Kuala Lumpur
QUOTE(ahpaul82 @ Oct 8 2014, 11:43 PM)
I requested the R3 Umbrella but rejected  laugh.gif  laugh.gif  laugh.gif

Should get the R3 ECU instead tongue.gif
Anyway just got the Beanie:

Attached Image
*
I oso got Proton Motorsports Cap as well beside that Beanie brows.gif So in total I got 3 free gifts+balloon from awek R3 laugh.gif That R3 umbrella is freakin huge shocking.gif

This post has been edited by The Red Giant Warrior: Oct 9 2014, 01:12 AM
R.Y.D.E.C.K
post Oct 9 2014, 10:15 AM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(The Red Giant Warrior @ Oct 8 2014, 08:49 PM)
I see. Holy Pikachu  shocking.gif 4k for R3 rims?? In your opinion, are R3 rims good?
Got  brows.gif got R3 umbrella and Proton Motorsports Beanie? Cap  thumbup.gif oh and free balloon from awek R3  brows.gif
*
tht time consider a rare items...R3 is just a normal Alloy wheels which are wheels that made from an alloy of aluminium or magnesium im prefer forged one...Most alloy wheels are manufactured using casting, but some are forged. Forged wheels are usually lighter, stronger, but much more expensive than cast wheels.

Japan do alot Forged nowadays taiwan & korea lead the design & manufacturing as the european pefer japan rims and american love custom their rim..

paul can confirm tt on 18th october?wasap2 laugh.gif
eastwest
post Oct 13 2014, 09:13 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
what tt?
R.Y.D.E.C.K
post Oct 15 2014, 08:58 AM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(eastwest @ Oct 13 2014, 09:13 AM)
what tt?
*
pm @azumakun for whatsapp laugh.gif
eastwest
post Oct 21 2014, 10:04 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
smile.gif
natz85
post Oct 22 2014, 11:56 PM

Getting Started
**
Junior Member
51 posts

Joined: Oct 2006
hi any know where to change the front bumper of waja cps
peejayboy
post Oct 24 2014, 09:13 AM

New Member
*
Newbie
1 posts

Joined: Apr 2012
Hi fellow members, is anybody facing issues with the front strut bar rubbing against the intake snorkel or bonnet for neo cps engine?

Because the rubbing sound is getting irritating...and was wondering will it cause any adverse long term effect sad.gif

This post has been edited by peejayboy: Oct 24 2014, 09:21 AM
jctasoga
post Oct 24 2014, 10:34 AM

Getting Started
**
Junior Member
179 posts

Joined: Dec 2008
From: BP, JH
peejay, if its rubbing, put some rubber or foam to reduce the rubbing. if it keeps rubbing, the snorkel will be punctured.

got picture?
peejayboy
post Oct 24 2014, 12:10 PM

New Member
*
Newbie
1 posts

Joined: Apr 2012
QUOTE(jctasoga @ Oct 24 2014, 10:34 AM)
peejay, if its rubbing, put some rubber or foam to reduce the rubbing. if it keeps rubbing, the snorkel will be punctured.

got picture?
*
I just went and have a look again and the major rubbing occur right below the hood.

Now i know why neo cps owners dont really put front strut bar..bad design by UR.

I will upload pic later tho, thanks for the tips btw smile.gif
Max
post Oct 24 2014, 01:49 PM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
QUOTE(peejayboy @ Oct 24 2014, 12:10 PM)
I just went and have a look again and the major rubbing occur right below the hood.

Now i know why neo cps owners dont really put front strut bar..bad design by UR.

I will upload pic later tho, thanks for the tips btw  smile.gif
*
which type UR strut bar u use for ur neo CPS?
UR got 2 model for neo. campro n CPS.
peejayboy
post Oct 24 2014, 02:24 PM

New Member
*
Newbie
1 posts

Joined: Apr 2012
QUOTE(Max @ Oct 24 2014, 01:49 PM)
which type UR strut bar u use for ur neo CPS?
UR got 2 model for neo. campro n CPS.
*
Am using the UR neo cps version

I replied you over at neo club there btw and guess ill just remove it, the bar did not much help anyway.

This post has been edited by peejayboy: Oct 24 2014, 02:24 PM
Azuma-kun
post Oct 25 2014, 06:35 AM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
Malam ni special mini TT. Siapa ada kelapangan, sila hadirkan diri.

Lokasi: Burgerbyte Damansara Perdana
Masa: 8PM sampai subuh. Siapa nak berambus awal, silakan. Tak sure plak aku 8PM tu awal sangat ke lambat sangat.
Aktiviti: Makan dekat Burgerbyte kemudian sambung tengok bola Arsenal vs Sunderland dekat kedai sebelah, Merrah bak kata markiliz. Aku tau dulu namanya Herris.
Dress code: Jangan bogel sudah.

Pesanan penaja: Makan/minum bayar sendiri. Kalau nak shisha, ok set, kasi share.

This post has been edited by Azuma-kun: Oct 25 2014, 06:35 AM
The Red Giant Warrior
post Oct 25 2014, 07:12 PM

New Member
*
Junior Member
13 posts

Joined: Oct 2012
From: Kuala Lumpur
QUOTE(peejayboy @ Oct 24 2014, 09:13 AM)
Hi fellow members, is anybody facing issues with the front strut bar rubbing against the intake snorkel or bonnet for neo cps engine?

Because the rubbing sound is getting irritating...and was wondering will it cause any adverse long term effect  sad.gif
*
Mine UR Strut bar so far so good hmm.gif only some minor vibration noise when the reverse the car

peejayboy
post Oct 26 2014, 11:38 AM

New Member
*
Newbie
1 posts

Joined: Apr 2012
QUOTE(The Red Giant Warrior @ Oct 25 2014, 07:12 PM)
Mine UR Strut bar so far so good  hmm.gif only some minor vibration noise when the reverse the car
*
Is yours the cps model? If it is there will be the vibration noise due to it is touching the hood insulation if you notice.

And if you realize even the neo r3 rs & lotus edition never use the front strut..wondering why eh
The Red Giant Warrior
post Oct 26 2014, 08:54 PM

New Member
*
Junior Member
13 posts

Joined: Oct 2012
From: Kuala Lumpur
QUOTE(peejayboy @ Oct 26 2014, 11:38 AM)
Is yours the cps model? If it is there will be the vibration noise due to it is touching the hood insulation if you notice.

And if you realize even the neo r3 rs & lotus edition never use the front strut..wondering why eh
*
yup mine is CPS. Hmm I never heard mine's vibrate hmm.gif mine is all good

hickups
post Nov 3 2014, 11:39 PM

Casual
***
Junior Member
477 posts

Joined: Jan 2003
From: Klang
to open the passenger side air cond waja cps..just can pop it out or have to unscrew from behind/inside the vent??
eastwest
post Nov 17 2014, 09:22 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
yawn.gif
surefire v LED
post Nov 18 2014, 07:44 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
Hi guys - my tail lamp both is almost out of order due to the housing lamp got overheating from the main bulb - so i'm about to change both of it - anybody using Eagle Eyes LED tail lamp?
is it legal?Anybody have install it with your own hand biggrin.gif
TIA
R.Y.D.E.C.K
post Nov 19 2014, 11:18 AM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
Hey lads,

some balance tshirt from last event.

<<<<< last stock >>>>>

Size Available:

Charcoal:
M - 4
XL -2
L -1
XXL - 2

White:
XXL - 1

Blue:
XL - 1

CAMO PRINT .

Special Made - CPS Camo
Detail Price FOR ONLY : RM40. PM me
Tshirt : GILDAN Premium 100% Cotton ( best quality shirt on market )
Color : As Pictures.

*Full Name:
*Address: * safe for parcel to arrive
Postage Poslaju
PM / Whatapps 010 - 431 1950

Attached Image Attached Image Attached Image Attached Image

visit: https://www.facebook.com/groups/cps.tribe/ for more content@ whacking thumbup.gif thumbup.gif

ahpaul82
post Nov 24 2014, 11:16 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
Loving it . wub.gif

Attached Image

placebo effect, 50HP increased! laugh.gif
eastwest
post Nov 27 2014, 04:30 PM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(surefire v LED @ Nov 18 2014, 07:44 PM)
Hi guys - my tail lamp both is almost out of order due to the housing lamp got overheating from the main bulb - so i'm about to change both of it - anybody using Eagle Eyes LED tail lamp?
is it legal?Anybody have install it with your own hand biggrin.gif
TIA
*
Change already?

QUOTE(R.Y.D.E.C.K @ Nov 19 2014, 11:18 AM)
Hey lads,

some balance tshirt from last event.

<<<<< last stock >>>>>

Size Available:

Charcoal:
M - 4
XL -2
L -1
XXL - 2

White:
XXL - 1

Blue:
XL - 1

CAMO PRINT .

Special Made - CPS Camo
Detail Price FOR ONLY : RM40. PM me
Tshirt : GILDAN Premium 100% Cotton ( best quality shirt on market )
Color : As Pictures.

*Full Name:
*Address: * safe for parcel to arrive
Postage Poslaju
PM / Whatapps 010 - 431 1950

Attached Image Attached Image Attached Image Attached Image

visit: https://www.facebook.com/groups/cps.tribe/  for more content@ whacking thumbup.gif  thumbup.gif
*
no money sweat.gif

QUOTE(ahpaul82 @ Nov 24 2014, 11:16 PM)
Loving it .  wub.gif

Attached Image

placebo effect, 50HP increased!  laugh.gif
*
drool.gif I want also tongue.gif
penpal_my
post Dec 2 2014, 09:53 PM

New Member
*
Junior Member
30 posts

Joined: Nov 2006
hi guys..long time not post here..

my 5 years old waja cps got handbrake and abs light on..it happened quite often. sometimes, during driving. i need to stop then restart a few times to get that sign off. after do some search, i found it is normal problem for waja with abs.

what i'm worry now, whether abs module or related of that thing is already kong. or it is just abs sensor get dirty? can SC detect the cause if they check during the sign off? if abs already kong, i think i cant afford to replace it. cry.gif

This post has been edited by penpal_my: Dec 2 2014, 09:55 PM
surefire v LED
post Dec 2 2014, 10:56 PM

Never Say Never But Say Never 2 Proton
*******
Senior Member
4,349 posts

Joined: Sep 2005
QUOTE(penpal_my @ Dec 2 2014, 09:53 PM)
hi guys..long time not post here..

my 5 years old waja cps got handbrake and abs light on..it happened quite often. sometimes, during driving. i need to stop then restart a few times to get that sign off. after do some search, i found it is normal problem for waja with abs.

what i'm worry now, whether abs module or related of that thing is already kong. or it is just  abs sensor get dirty? can SC detect the cause if they check during the sign off? if abs already kong, i think i cant afford to replace it. cry.gif
*
You go to Sri Rampai opposite 99 Speedmart there is a Castrol shop,they can clear the error for RM20 if not mistaken.
Effy92
post Dec 2 2014, 11:50 PM

Getting Started
**
Junior Member
294 posts

Joined: Apr 2010
From: Malaysia
QUOTE(ahpaul82 @ Nov 24 2014, 11:16 PM)
Loving it .  wub.gif

Attached Image

placebo effect, 50HP increased!  laugh.gif
*
eh where you buy that knob? how much? drool.gif
ahpaul82
post Dec 3 2014, 12:43 AM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(eastwest @ Nov 27 2014, 04:30 PM)
Change already?
no money sweat.gif
drool.gif I want also tongue.gif
*
QUOTE(Effy92 @ Dec 2 2014, 11:50 PM)
eh where you buy that knob? how much?  drool.gif
*
ada so call 35% discount again until end of Year.. laugh.gif

Attached Image
Effy92
post Dec 3 2014, 01:14 AM

Getting Started
**
Junior Member
294 posts

Joined: Apr 2010
From: Malaysia
QUOTE(ahpaul82 @ Dec 3 2014, 12:43 AM)
ada so call 35% discount again until end of Year..  laugh.gif
*
If i change to r3 knob can it makes the stick shorter a bit? hmm.gif
From your picture it seem the shifter short a bit than stock knob. i like short shifter.

This post has been edited by Effy92: Dec 3 2014, 01:14 AM
ahpaul82
post Dec 6 2014, 07:52 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(Effy92 @ Dec 3 2014, 01:14 AM)
If i change to r3 knob can it makes the stick shorter a bit?  hmm.gif
From your picture  it seem the shifter short a bit than stock knob. i like short shifter.
*
Memang rasa jadi short-shifter already laugh.gif

Attached Image

shorter at least 4cm+
Effy92
post Dec 6 2014, 08:03 PM

Getting Started
**
Junior Member
294 posts

Joined: Apr 2010
From: Malaysia
QUOTE(ahpaul82 @ Dec 6 2014, 07:52 PM)
Memang rasa jadi short-shifter already  laugh.gif

Attached Image

shorter at least 4cm+
*
Wow, must buy this knob before new year. drool.gif

many thanks for the picture. thumbup.gif rclxms.gif


penpal_my
post Dec 7 2014, 03:45 PM

New Member
*
Junior Member
30 posts

Joined: Nov 2006
QUOTE(surefire v LED @ Dec 2 2014, 10:56 PM)
You go to Sri Rampai opposite 99 Speedmart there is a Castrol shop,they can clear the error for RM20 if not mistaken.
*
Sri Rampai? never heard this place cry.gif . After intend to sent my car to SC, now it didn't showed that symptom again. normally, after stop and then on the key instantly, the handbrake and ABS sign will remain on.

BTW, I'm waiting my new iriz. don't know whether the driving pleasure same like my waja. whistling.gif
eastwest
post Dec 8 2014, 11:48 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(penpal_my @ Dec 7 2014, 03:45 PM)
Sri Rampai? never heard this place cry.gif . After intend to sent my car to SC, now it didn't showed that symptom again. normally, after stop and then on the key instantly, the handbrake and ABS sign will remain on.

BTW, I'm waiting my new iriz. don't know whether the driving pleasure same like my waja. whistling.gif
*
change car?
penpal_my
post Dec 8 2014, 02:28 PM

New Member
*
Junior Member
30 posts

Joined: Nov 2006
QUOTE(eastwest @ Dec 8 2014, 11:48 AM)
change car?
*
no la..2nd car..waja sayang mahu jual.
eastwest
post Dec 9 2014, 10:01 AM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(penpal_my @ Dec 8 2014, 02:28 PM)
no la..2nd car..waja sayang mahu jual.
*
rclxms.gif
R.Y.D.E.C.K
post Dec 18 2014, 11:34 AM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
aloppakkkk tongue.gif

yc1987
post Dec 19 2014, 10:25 AM

New Member
*
Junior Member
29 posts

Joined: Jul 2007
urgent help required..

looking for someone who has a contact that can source the following part number:
PW811017 - the squarish plate between the crankshaft and gearbox for neo cps auto

my car has been stuck at the workshop for a week since it broke down (that whole plate got destroyed - crack and broken)
ahpaul82
post Dec 20 2014, 01:13 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(yc1987 @ Dec 19 2014, 10:25 AM)
urgent help required..

looking for someone who has a contact that can source the following part number:
PW811017 - the squarish plate between the crankshaft and gearbox for neo cps auto

my car has been stuck at the workshop for a week since it broke down (that whole plate got destroyed - crack and broken)
*
If the Part Number you given is correct,

then price is RM55.
yc1987
post Dec 21 2014, 09:40 AM

New Member
*
Junior Member
29 posts

Joined: Jul 2007
QUOTE(ahpaul82 @ Dec 20 2014, 01:13 PM)
If the Part Number you given is correct,

then price is RM55.
*
yup.. should be ard there..
up till today Proton does not have stock at all.... find this totally amazing that whole klang valley not a single proton stocky, coe or whatever have this part
i've sourced the parts from a halfcut shop for now
angrysnail
post Dec 21 2014, 10:43 AM

SuperStars
******
Senior Member
1,413 posts

Joined: Aug 2009
From: Damansara
Anyone here is using LSD in their CPS?any thought?Thinking to get one.
ahpaul82
post Dec 21 2014, 11:54 AM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(yc1987 @ Dec 21 2014, 09:40 AM)
yup.. should be ard there..
up till today Proton does not have stock at all.... find this totally amazing that whole klang valley not a single proton stocky, coe or whatever have this part
i've sourced the parts from a halfcut shop for now
*
My friend claimed that his shop is the only shop that available of this part.

Genuine Proton Spare Parts.

Saw it on other thread you already got it from halfcut shop. biggrin.gif

This post has been edited by ahpaul82: Dec 21 2014, 12:08 PM
eastwest
post Dec 22 2014, 01:35 PM

Regular
******
Senior Member
1,608 posts

Joined: Nov 2007
QUOTE(ahpaul82 @ Dec 21 2014, 11:54 AM)
My friend claimed that his shop is the only shop that available of this part. 

Genuine Proton Spare Parts.

Saw it on other thread you already got it from halfcut shop.  biggrin.gif
*
WOW.... even proton doesn't have that part????!!!!
ahpaul82
post Dec 22 2014, 11:08 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(eastwest @ Dec 22 2014, 01:35 PM)
WOW.... even proton doesn't have that part????!!!!
*
maybe just currently out of stock only lah,

and so happen my friend shop got keep this stock mah,

so he said macam tu, I listen jeh loh whistling.gif
ahpaul82
post Dec 26 2014, 06:18 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
car have weird problem recently,

doors lock immediately after unlocking, apa jadi? shakehead.gif
yc1987
post Dec 29 2014, 10:09 AM

New Member
*
Junior Member
29 posts

Joined: Jul 2007
QUOTE(ahpaul82 @ Dec 26 2014, 06:18 PM)
car have weird problem recently,

doors lock immediately after unlocking, apa jadi?  shakehead.gif
*
got same prob on mine before..
the "press brake pedal" to lock door gadget rosak and burn some relay near the left foot rest
button got stuck and have to use force to tarik the button kau kau haha
ahpaul82
post Dec 29 2014, 12:19 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(yc1987 @ Dec 29 2014, 10:09 AM)
got same prob on mine before..
the "press brake pedal" to lock door gadget rosak and burn some relay near the left foot rest
button got stuck and have to use force to tarik the button kau kau haha
*
hmm...

where is the press brake pedal you mean located?

now become worse,

keep on lock when I try to unlock my car... vmad.gif rclxub.gif
R.Y.D.E.C.K
post Dec 29 2014, 12:52 PM

Getting Started
**
Junior Member
246 posts

Joined: May 2008
QUOTE(ahpaul82 @ Dec 29 2014, 12:19 PM)
hmm...

where is the press brake pedal you mean located?

now become worse,

keep on lock when I try to unlock my car...  vmad.gif  rclxub.gif
*
relay probs...as singchai
pAdiLaDEn
post Dec 29 2014, 05:13 PM

New Member
*
Newbie
1 posts

Joined: Feb 2010
QUOTE(ahpaul82 @ Dec 29 2014, 12:19 PM)
hmm...

where is the press brake pedal you mean located?

now become worse,

keep on lock when I try to unlock my car...  vmad.gif  rclxub.gif
*
Last time happened to me and found out the connector for central lock (not the button, the "pistol" one) in driver side door is loose.
So i just use black tape and wrap the connector.
What happen is when you unlock, the connector is shaking and the connection will break making the "pistol" to lock again.
ahpaul82
post Dec 31 2014, 01:46 AM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(R.Y.D.E.C.K @ Dec 29 2014, 12:52 PM)
relay probs...as singchai
*
QUOTE(pAdiLaDEn @ Dec 29 2014, 05:13 PM)
Last time happened to me and found out the connector for central lock (not the button, the "pistol" one) in driver side door is loose.
So i just use black tape and wrap the connector.
What happen is when you unlock, the connector is shaking and the connection will break making the "pistol" to lock again.
*
I try to enable and disable this child protection lock,

Attached Image

surprisingly after a day usage, the weird symptom gone... sweat.gif shakehead.gif

Will continue monitoring it.

pAdiLaDEn,

the piston you mean is it looks like this ?

user posted image
pAdiLaDEn
post Dec 31 2014, 11:51 AM

New Member
*
Newbie
1 posts

Joined: Feb 2010
QUOTE(ahpaul82 @ Dec 31 2014, 01:46 AM)
I try to enable and disable this child protection lock,

Attached Image

surprisingly after a day usage, the weird symptom gone...  sweat.gif  shakehead.gif

Will continue monitoring it. 

pAdiLaDEn,

the piston you mean is it looks like this ?

user posted image
*
Yes the wire connector of the pistol is loose. After i tape the connector, no more issue..
ahpaul82
post Jan 2 2015, 10:13 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(R.Y.D.E.C.K @ Dec 29 2014, 12:52 PM)
relay probs...as singchai
*
R.Y.D.E.C.K, singchaii,

where is the relay located? hmm.gif
« Next Oldest · Car Clubs · Next Newest »
 

2 Pages  1 2 >Top
Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.3139sec    0.39    6 queries    GZIP Disabled
Time is now: 15th December 2025 - 09:48 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.