Just a question, does current data show that E6400 always show higher o/c compare to E6300? I saw some article keep on mentioning E6300 using stock heatsink can only reach 2500Mhz++ while E6400 can hit 2800Mhz++. Anyway, I'm going to use watercooling to squeeze the max out from the processor. Should I save RM 100++ to get E6300? Also, what budget RAM can do 800Mhz easily?

Eh...I only got 1GB ram

^hmmm.. look like my rank the lowest, anymore user wif cheapop "allendale" user here?
kamon, post ur OC result here(hoping is there any lower than mine)

sorri 4 d noob question..anyone got OC review on dis mobo: ASrock ConRoeXFire-eSATA2

thx

@ frank_fusion : nope..

@ gengstapo : why dont u push ur e6300 more?

and for those who r interested with E6400 week 23 plz let me know.and i'm going to sell my DQ6 as well.. enuff testing already. 367fsb on 4mb conroe is among the best result for 965 mobos.

I'm sure you can pump more vcore and get it up. Even my E6600 on stock can touch your speeds already.

wahh, how come u compared those e66 wif e63 chip?
e66 ady having 2.4Ghz of speed while e63 onli 1.86Ghz, sure ur chip easily can get 0.4Ghz & the speed ady same

nope. E6600 needs lots of voltage, more than E6300 or E6400 do..

and i believe the prob is ur board.. send ur processor to any forumer here to test or go buy other board

izzi?? never tot e66 need more juice than e63.
but anyway, i dont think my e63 is $uck, it more to the RAMs i believe.
any user of DS3 here has tested the F4C BIOS, feedback??

It surely needs more power due to additional L2 cache. That's why it's very advantageous for those who can adjust Vcore.

For example, the X6800 couldn't boot at 1.35V if I OC to 3.5ghz. However, when I bumped up the Vcore to 1.5V, I could reach almost 3.9ghz!

Haiz, I'm stuck at 2.45ghz Dual Prime stable. RAM's holding it back. Even 10mhz extra to the FSB oso cannot. Y oh y doesn't Gaygabyte give us a RAM divider less than 1:1 I really dont understand. Hopefully they gif us a better divider in the next BIOS update.

me tested all those bioses
no problem for me so far on e6300 & e6600
now using F4 official

ur ds3 is a gem.. so rare people got like urs

i think its becoz of his RAMs oso lerr
im using onli CVS, sure depend alot on luck

i also used CVS before, remember? =D btw yes might be ur ram that holding ur oc but raymond ds3 is definitely a gem.. where can u find a 965 board that can do 420fsb with e6600 stepping 6? it's not easy

mine now at 367 is also consider good alredi, 420 is definitely superb!

i was using value ram 667 before no problem oc it up to 430fsb
but my friend ds3 ady rma twice cant oc even a bit using my hyperX ram & my e6300 also
now he change Asus P5B DLX wifi ed ady damn pissed with ds3
but part of it depend on luck also la.......

here my latest with Team Xtreem D9 memory running on 4:5 divider



This post has been edited by rlhc17: Aug 18 2006, 04:52 AM

Cool!! Perhaps, I should be getting some of the D9s. But before that, let me see if I can wring out more from this cpu.

currently using F4C
fan speed n cpu temp is lower than the time i using official F4(test with CD336)
n the timing is tighter, cl3...

Off topic a bit but I thought u guys might find it interesting:

http://www.xtremesystems.org/forums/showthread.php?t=111574

Setup:
Kentsfield E6700 2,67GHz Quad
Asus P5W DH bios 801
G.Skill 8000GBHZ@ 3-3-3-4-2-A-D
OCZ Powerstream 600W sli
Club 3D Geforce 7950GX2@air with no mods
Mousepot copper
LN2

saw that DS3 cant oc with D9 chips...
usually ram problem...
try with other ram adi?