@genstapo & tampoi
u 2 using DS3 rite? i wonder wats the highest FSB in the bios? 500?
hw bout DS4 user? wats the highest FSB in bios?

yupp. highest can be set was 600Mhz
mine onli able to stable at 400Mhz, perhaps limitation from my RAMs i believe

mine is already 7 x 438 for 24/7 x2 days...... lol....
3066MHz this figure is sweet, 3150MHz is stable too but I need MCH +0.3v which will cause my SCSI MegaRAID cannot be detected.

More photos, taken during sunset hours.





Attached thumbnail(s)

Not yet, been playing with my Atom the whole weekend now... will try it later.... am curious to see that as well.

austin oc is sweet.....since u take so many pics...mind to take a shot at ur ram chipset?

here you go.....

hey bro, is ur C2D passed 3DMark test??

This post has been edited by gengstapo: Aug 6 2006, 04:00 PM

as i said earlier, whatever i do, i cant get pass 450fsb. when i set in bios, it will reset the oc and boot at 266x7.. if i set using easytuner, it will hang straight away..

but after change my sata hdd from gigabyte sata to intel sata, i manage to hit 452 =D ahaks eventhough it's only 2fsb, but it still proves to me that sthing can be done to make it go higher

here is the screenshot, dont bother bout the super PI result since i ran many application before i ran super PI.

451x7 set in bios. then increase 1 mhz more using software.

i believe the problem with DS4 is the bios.. in XS, people are saying DS3 is better than Dq6 in OC. bcoz many DQ6 users can reach high fsb like DS3 user..
and since DS4 can use DQ6 bios (both board is almost same), then i guess DS4 is worse overclocker than DS3.. hopefully ram timing, and few things will be improved in next bios..

rite now i ran my pc for 2-3 days @ 450x7, ram 900, vcore 1.375, vdimm +0.2, vmch +0.2, vfsb +0.1. no problem even when i played oblivion for 2hrs. but when i ran sp2004, it will hang. stimes after 5hrs, stimes after 5mins.. i also dunno why...


Attached thumbnail(s)

sweet......thx austin...

Irenic, have you tried everything 'Normal' except for Vdimm? I think that works like a charm (at least for me, DS3) not quite sure about DS4 and DQ6

do u mean auto? for voltage?

well when i read other forum, i can say 450x7 is quite great.. a lot of people with retail c2d max at 3xx fsb.. and many of ds3 user hit the wall at 480fsb.

Of course I can pass 3Dmark looping test. But IMHO to ensure total stability, please test dual prime.
My SP2004 test @ 3066MHz passed 16hours and no hang. so lor...

This post has been edited by Austin: Aug 6 2006, 09:52 PM

oit bro, u using wat RAMs arr? value wan arr??


ic. anyway, nice rig u got there.

ps : i just finish format my windowz, corrupted during OC'ing activities

Dual Prime for RAM stress stable ?

here u goes.. http://forum.lowyat.net/index.php?showtopi...dpost&p=8022109

That one is only apply to stress CPU, not RAM.

im refering to his RAM timing, 3-6-6-16 at 438MHz.
i would like to see dual prime setting for that timing
like this :

ohh...no problem will test now..

Great !!!
coz my shop got plenty of this kind of chipset RAM

I think for RAM I run single prime is enough, cos just single only my RAM all fully occupied by the program already