my Team DDR667 boot at 1.95Vdimm (the lowest Vdimm on my mobo) ....

I believe the RAM will boot at DDR800 with just 1.8V .... but when u get to the BIOS... just set the timing to 2T for extra stability.

This post has been edited by soulfly: Aug 17 2006, 11:59 AM

ok i will get my friend this info.Coz i did voice my concern to him over the low vdimmin m2n-e when i ask him for me to buy the board..like kutuk asus abit heheheh...
i cant promise anything...but will try to help..

This post has been edited by CV6149: Aug 17 2006, 06:02 PM

guys i wanna ask something i juz figured out a lil bit about overclocking cpu... and my bios has all the overclocking option, so if i wanna do slight overclocking all i do is to change the cpu clock frequency? my multiplier is x11 so once i change the fsb i don't need to do anything to my ram rite?

any change with the cpu clockspeed will result change in memory clockspeed as well.

please refer to the cpu/ddr2 divider table at the first page

ok tailou... i read the divider thingy and i have no idea at all what izzit

Please take note, Evercool VC-RE cannot fit with DFI Infinity UltraII-M2.

how's that thing looks like? couldn't find on the website

how about Vantec Iceberq? Do you think it would work?

hi guys,

for asus m2n-e user..sadly i got some bad news...ive talk to my friend..complaining about the low vdimm that the board provide.
he say he did ask from the board designer to give a extreme version bios..but sadly it was decline....now only time will tell whether asus will release the bios or not...theres alot info ive discuss but i cant publish it here...its about the stablity and mass market.DDR2 667 value ram will run at 1.8v sooo 1.95 is quite enuff also...

so sorry cant help much....

I already mentioned earlier... eventhough the board layout is similar to M2N32 ...that doesn't mean that you can get max Vdimm as simple as BIOS mod. Everything else need to take into account like the power regulator, mosfet and such. The last resort is to Vdimm mod. There's a guide at XS forum, you guys might wanna dig it.

As for TForce550 user, vdimm pencil mod is as easy as shading the R92 resistor near the 2.2V jumper. Be aware that you WILL need a digital multimeter to measure the Vdimm reading before booting the system to avoid risking your precious RAM. Oh by the way.... use an HB pencil.

I did mine and I get 2.41V max ....lol.

i get this board because it design and Asus, now i think this will be my last asus board not ever get asus anymore~

BTW any good am2 board to recoment??

how about Abit KN9-Ultra??

coz me here hard to find any DFI board and Biostar board also don know whre can i get it~

DFI AM2 Board

This post has been edited by tachlio: Aug 18 2006, 04:21 PM

How much is Abit KN9 Ultra?

my frd js get him Abit KN9 non ultra but model i not sure with about 400

i think ultra will about 450 at penang , KL may cheaper even more


and i check him bios it Vdimm can set up to 2.3v ( if i not see wrong is 2.5V) like DFI did

so i wan ask that anything i wan to take note if i get new board , this time don wan get that s*ck board le

Go xtremesystems forum, check out AMD section. I think there's one thread about KN9 Ultra I guess.... have a read see whether got issues or not.

Can fit one la bro.... just need to slightly "bend" one of the cap. Or you can trim the metal braket on the VC-RE.


Stock chipsink: LOAD 60ºC
VC-RE: LOAD 46ºC

pcmoddingmy u use DFI board??

but there write u are using Biostar board??

any coment about the board u are using now?

Yup.. currently using the DFI board. Recently I've posted a review on the UltraII-M2. You can read the review to learn more about the board. I managed to hit 440HTT easily on the stock Vchip and chipset cooler.

This will most expensive mobo AM2...



LANPARTY UT NF590 SLI-M2R/G

http://us.dfi.com.tw/Press/press_header_co...428.jsp&SITE=US

Spec:

http://us.dfi.com.tw/Product/xx_product_sp...TYPE=LP&SITE=US

Yup... most expensive indeed...
Digital PWM, copper heatsink, 90º SATA, 3.0VDIMM... gosh!
I'm guessing this baby will cost over RM1K at release.

Looks like I'll be molesting it early next month!

This post has been edited by pcmoddingmy: Aug 19 2006, 01:02 AM