great AM2 combo = Athlon64 3000+ ... DFI Infinity nF Ultra II-M2 ... TeamXtreem DDRII-667

link : http://www.xtremesystems.org/forums/showthread.php?t=110839

Who sells DFI Ultra II-M2 board in KL? Any shop in LYP?

if not mistaken, ATE has em'

hw much this board is?

i check my mobo disk it got come with a software " Ai Booster "

it allow me to change my Vdimm to 2.5V

but i see that Soulfy say that m2n-e only allow to 1.95V??

bios only 1.95v that's for sure

try use ai booster see whether got true 2.5v or not? coz ai booster might be having the same system as M2N-SLI or M2N32

guys..what good heatsink for this socket?

just bought this am2 lor...

oh ya i go bios and see it really allow to 1.95 ~

later will try use ai booster

i saw alot of members have M2N-E.. and again pair with budget dually X2 3800+.. please share ur oc experiences..

timing to play with... standard 667 KVR (5-5-5-12) 1T/2T

FSB : 200
HTT Mul : 5
vCpu : 1.33
vDimm : 1.8v
DDR Base : 667 4-4-4-11 1T

FSB : 210
HTT Mul : 5
vCpu : 1.33
vDimm : 1.8v
DDR Base : 667 (700) 4-4-4-12 1T

FSB : 220
HTT Mul : 5
vCpu : 1.33
vDimm : 1.9v
DDR Base : 667 (733) 4-4-4-12 1T

FSB : 240
HTT Mul : 4
vCpu : >1.40~
vDimm : 1.8v
DDR Base : 533 (600) 4-4-4-12 1T

FSB : 245
HTT Mul : 4
vCpu : >1.50~
vDimm : 1.8v
DDR Base : 533 (612) 4-4-4-12 1T


This post has been edited by 8tvt: Aug 15 2006, 10:04 AM

my teamxtreem should be coming by today... probably tonight will show some D9 p0wah!

ddr1000 ...here i come!

FSB : 250
HTT Mul : 5
vCpu : 1.35 ( but CPUz show 1.184v only )
vDimm : 1.9v
DDR Base : 4-4-4-12 1T ( it show 250Hhz at CPUz , did it right? )

i js use super pi 1m and 3dmark05 to test stablity coz no time nw will try more high later

This post has been edited by tachlio: Aug 15 2006, 12:37 PM

ur using 0103 bios? stable or not? try prime la..
i found 0203 bios cannot go fsb >250
http://dlsvr01.asus.com/pub/ASUS/mb/socketAM2/M2N-E/0302.zip
above is beta.. i not try yet but got someone try can go >350 fsb..

i rely on asus probe for vCpu..

i am using 0203 bios

yap it fail to boot up after over 250 fsb

even over 1 also cant

anyway to solve this?

This post has been edited by tachlio: Aug 15 2006, 03:43 PM

i am using Patriok DDR2 667 by using stock timing it is 5-5-5-15 2t
i now put at 4-4-4-12 1T

what value ram do u think is more worth to get , i mean can compatible with my mobo coz seen that asus board is picky ram

corsair value or kingston value ram?

any review did patriok did on this m2n-e hw to test the higher does this ram can do and the stablity

coz i still can change to other ram by this week
please help pls~

This post has been edited by tachlio: Aug 15 2006, 03:51 PM

ur using patriot or what? i thought patriot is ok... what chips it's using?
u try with the that beta bios la..
i'm using kvr.. if only i can get v2.2 maybe can get 800DDR.. but cannot try coz mobo limit it..

ya i am using patriok ram , and it got ram stick there if i open it i will viod my waranty so i don know what chip inside

now try using 10 mutiple unable pass 210 fsb also ~ don know y~

reduce HTT multi to 4x loh....

4x250 = 1000mhz (maximum)

i put 3 ady

hope someone can help us~

Hmm - it seems that we'are not the only ones having problems with RAM.
There are only 6 posts but 300+ views.
Also it seems that there no asus representative reads this message board.


What all of us can do, is to mail tsd@asus.com with description of problem and request updated bios/ or another solution. If you are lazy just as I am you can use template I prepared (but I recommend that you change it somewhat)
Remember - if enough of us mails asus it may speed things up.
Asus needs to know that this is serious problem , affecting many of us.
Worst case scenario I expect - we will get straight answer if this problem can be fixed or not.

So don't hesitate and fire up your mail client

Thanks, Christopher

----CUT HERE-------------------
Hello.

I recently bought ASUS M2N-E motherboard.
Your product is advertised as "Exceptionally Overclocking".
However this board suffers from serious bug: DIMM voltage can be set only at 1,95V max.
This not only limits overclocking potential, but also makes impossible to use most 667 and 800 MHz DDR2 memory sticks.
Most of these memory modules require 2,1-2,4V dimm voltage.
Also to my knowledge, many users report RAM stability problems even with major brand memory sticks.
I am really disappointed.

What I would like to now, is:
-is ASUS working on mentioned problems?
-can these bugs be fixed with BIOS updates? Or can they be fixed only by releasing new motherboard revisions?
-if higher DIMM voltage (>1,95V) can be only achieved by releasing updated motherboard PCB design, will my product be replaced free of charge?

I'm looking forward to your answer.

With Regards,

-------------------------------------------------------------------------------------------------
source : Asus Forum

This post has been edited by tachlio: Aug 15 2006, 09:08 PM

guys...do we make a mistake by buying this am2 socket n not conroe?

im in dilemma..

Its not like C2D price diff is RM50 right? Ppl also need to consider budget and availability. I buy AM2 and also able to afford a better GC to play games. No point buying a C2D just to get good superPI.