How can i set the timing for DDRII in Biostar Tforce 6100? I seem cant find anything similiar to my S939 DFI inifnity. I cant find where to set the Cas Latency and the bios DRAM configuration got too many stuff to play.

try pressing ctrl+f1 in bios....


how's the temp on AM2...17-19 degrees normal or not?

Nood o/c here:

I've absolutely no idea what i was doing.

My AMD64 3000+ multiplier is 9.0

So i set:
HTT=250Mhz
SB TO FSB (HT multiplier???)=800Mhz
RAM=266Mhz. (my RAM is DDR 667)

The result is (according to nvidia control panel):
Reference clock (HTT)=250Mhz
CPU frequency=2,250Mhz
HT bus frequency=1,000Mhz
Memory bus frequency=665(DDR2)

Is this good or bad??
All i heard is the HT bus should be kept at 1000?? I dare not go any higher...am i doing the correct thing here??

This post has been edited by Matrix: Jul 22 2006, 01:17 AM

is it really 19degrees using stock cooler? cool...

if i want to pair this AM2 with Scythe Mine..will it reach 15degrees??

This post has been edited by syarat: Jul 22 2006, 02:32 AM

wow lol is that even logic? Lower than ambient temperaure? Or you live at north pole?

i dunno...bug maybe/change with system temp...bios read 20-23...windows 17-19....

This post has been edited by beetle_larvae: Jul 22 2006, 03:23 AM


Attached thumbnail(s)

but if run prime...

case increase 2 degrees...cpu 13 degrees....
so idle temp is really 19 degrees?


Attached thumbnail(s)

r u using wc coz <30 is kinda cool for idle cpu

This post has been edited by hunt17: Jul 22 2006, 08:33 AM

Muahahaha... where got only 19 degrees ler... Mine is using stock cooler n the temp controller is reading idle 41 degree n full load 46-50 degrees...

Ha...ha...i think something wrong with sensor there. Unless using some super-cooling nitrogen freezing solution, unlikely be that low..


btw, guys, anyone can help with my OC question previously? I still dunno what i'm doing is right or wrong.

Thanks.

bro...care to share us your specs?

cheap am2 setup
im using gigabyte M51s2g RM325
KVR 512 Hynix 533 RM150
Sempron 2800+ manila RM145

This post has been edited by beetle_larvae: Jul 22 2006, 03:04 PM

eh.. stock heatsink?? mayb got some problem with thermal sensor like Matrix said coz abit unbelieveable

been googling for am2 temp but couldnt find 1 for ref

This post has been edited by hunt17: Jul 22 2006, 06:30 PM

try TC's "Core Temp" - A program for accurate K8 temperature monitoring
it monitors the cpu proc with internal component.
So far my my case, the reading is a lil different ftrom mobo's probe

damn the core temp software reads 36 degrees for my cpu now

alaa..only 36 lol..no need to sweat..hehe

haha wanna join this AM2 clan!!!
juz come back from lowyat today
went to pczone n saw the new price for AM2 proc!!!!
x2 3800 is oni for rm590

but before buying wanna ask anyone using biostar tforce 550 mobo
good for oc or not hehe

Any recommendations on what mobo to get that is reasonably priced (around RM400) and good for overclocking?
Feeling gatal again after the price drop

Biostar TForce 550...how the performance, can ask abg soulfly...

Just get boards with 570-590 chipset.dun buy 6100.My Giga board 6100 no OC option in bios .Luckily can use software.

Eventho I've been ocing for 5yrs,still cant understand how AM2 Fsb or HTT works.So wanna ask expert here.I cant get past 250HTT if I set DDR2 at 667 in bios...but if set DDR2-400 can go up to 300HTT currently still priming.Why like this one.Set DDR2 667 with lower clock speed or set 400 with higher clock speed better?

This post has been edited by beetle_larvae: Jul 23 2006, 10:08 AM


Attached thumbnail(s)