apa hal , why involve me I don't do this service long time already

Just go hardware shop buy the ring spanar la....very cheap only....can DIY one...like eat kacang putih...

Use your car jack to jack the car up a bit can already since you guys car not lowered just jack a bit can get under the car already loh....mine lowered, take off 1 side tire (this one optional, I check the shocks mounting) and jack high high and slide tire under the car then only crawl under the car with my back also didn't wet until underwear leh...can do at night also mah....night time no sun, cooler also just use a torch light to give some light.

Just crawl under the car and position yourself right under the center of the spare tire then you can do both side jor...no need to crawl here and there la...trsut me....I no point you guys go dead road one...The tools you buy can keep for future use....who knows 1 day you need it then don't have it.

Holding your own tools + crawl under your own car + repair it yourself + sweat = priceless moments, money can't buy....

This post has been edited by TitanRev: Feb 12 2014, 07:12 PM

Some uneven road, speedbump tarak. Cornering got, but lets see after they replace the axle LOL

should be different from mine.
mine is uneven road / speedbump / hard corner(genting road) will have. where the sc change absorber check this & that cant solved.
last is just the absorber stopper kong, hence the absorber drop flat & tuk sound during the force on it.

NMGH, whole CNY weather hot like oven, but today when I wanna wash car it rains while I'm still washing

This post has been edited by dares: Feb 12 2014, 08:12 PM

saja cakap aje. . tu 3max bangla pun guna tu standard lift 1 side and install only nia.

can go SC tighten also. . he drain EO, I belakang tighten the bolt

every year CNY is hot and without rain

Not today it isn't

Talk about cheap, the 13mm ring spanner I bought to fix on the ARB only cost me RM3.90

guys, my ac button got stucked. luckily it got stucked to 'on'. anyway to unstuck it? can i diy pry open the panel surrounding it?

pic attached.

when I go up genting almost every corner tuk once ( hard cornering la )
I don't know SC can tahan how long maybe they keep replace other part replace replace until fed up change whole set suspension everything or maybe replace with new car

Either spring seat or esoba mounting





Car may be new, but the damage could caused by bad assembly/installation. Good luck

serve you right.
dah pakai plotong, so duduk diam dan jangan komplen la lettew.

so it's true la.

Good morning all, long time no see.

Next month i will drive up to Genting.
Just want some advises on my clutch and brake condition.

Now my car adi clocked 112k, stock clutch and brake pad.

For brake pad, service 2 months ago i saw still left >50% of it. For clutch i have no idea how the condition.

Should i go to change the brake pad and check the clutch condition before i go up Genting?

brake pad should be ok, clutch wise not sure need to wait manual sifu to reply u... and better check ur radiator fan condition, as sum1 here go half way radiator fan suddenly not working cause overheat..

Who is unfortunate person? Very common during the holiday season going up.

i still drive up genting even with 20% brake pad left. no issue with it as long as it still bite.

indeed. cny i head up along the way i count total 6 unit stop at roadside with hood open. some with mech working on it.
that exclude others that stop but without hood open.

This post has been edited by MylesAuto: Feb 13 2014, 09:55 AM

u tak tau ke? he got mention on TT wor...

sum stop on side road its to cool down for a moment b4 going up again... last time i drive my dad car also need to rest a while... coz dunno the engine can tahan or not even thou temperature is normal..

U think I go to every TT and listen to every conversation meh?