haha funny

Boleh pasang ke kalau wayar doorbell kat rumah jenis 2 wayar tapi saya dah terbeli yg 4 wayar. Ke kena beli jenis 2 wayar jg?

Di mana you jumpa dua wayar ni?
Di dalam rumah atau luar?

Yang ni dalam rumah. Merah ada api, live. Hitam tak ada mungkin neutral

Tapi tadi cek wayar di suis, hitam dan merah tak ada api. Dah tekan butang loceng

This post has been edited by ajizaimi: Jun 24 2018, 08:35 PM


Attached thumbnail(s)

I think you bought the correct doorbell
Now you got to find which wire goes to where - you got 5 wires inside your house
L, N, E and two wires from the push switch.

tak dapat. wayar hitam yg ada 3 saya sambung 1 di neutral dan 2 lagi di wayar suis kat doorbell. Dah tukar2 wayar2 hitam pun tak jadi

i cant see properly but at the wall there i think 3 black, 1 red, 1 green?
first isolate the Live. You said Red is Live which seems weird to me because your switch got 1 red and 1 black. How did you determine it as Live?

I think this case only ozak can help you. I suggest you take a picture of the doorbell and post here as well so he can tell you which wire connect where

This post has been edited by idoblu: Jun 28 2018, 07:40 AM

Yes boss. What can I help you.

This wire pening pening.

Kalau tak salah saya, dalam pic ni memang 4 wayar doorbell. Tapi kena cari keluar yang mana L, N dan 2 wayar untuk suis. Dalam 3 wayar hitam ni, mungkin salah satu ialah L.

Ni ialah doorbell 2 dan 4 wayar pasang.



Dalam pic kalau 4 wayar, jalan mungkin begini. Kalau 2 wayar doorbell, pic wayar agak keliru.



Apa yang perlu buat sekarang ialah guna multimeter cari keluar wayar2 ni yang mana satu dari switch, L dan N. Baru boleh pasang.

Cari electrician tolong kalau tak pasti.

guna test pen lah, ada api . Live lah kan

Yang kena balut wire tape adalah wayar letrik hidup/neutral. (Biasanya Satu wayar hidup dengan 2 neutral, neutral tu dari papan suis dgn looping)

Wayar tiada wire tape adalah dari suis loceng.

Gunakan 4 wire config bro Ozak untuk sambungan pintu loceng AC.

This post has been edited by Richard: Jun 29 2018, 04:17 AM

---

This post has been edited by pmaxv: Dec 31 2019, 02:25 AM

not as reliable as hard wired ones
for condo ok lah, for landed props - better to use wired door bells.
wiring problems only surface when you try to DIY. If you know how or willing to hire someone to do it then no wiring problems.

both got pros and cons

This post has been edited by idoblu: Jan 26 2019, 10:06 AM

---

This post has been edited by pmaxv: Dec 31 2019, 02:54 AM

Can u share the photo of your connection of the wire? Pls

It is very reliable now, outdoor unit no battery needed and it's dirt cheap. Even though I have wires, I choose to use the wireless one. Can plug into any room with power socket but if slightly far or have blockage might have issue. Normal double storey should be ok.

I using wireless now also...haha...so far so good. Summore can send notifications to my phone
One thing good about wireless - they are cheap to replace

Terima kasih semua. Kabel di dinding Live memang merah. 3 hitam tu 1 neutral, 2 kabel suis. Kabel suis di luar entah kenapa kontraktor guna warna hitam n merah. Baik terus guna dua2 hitam. Bila check, kabel suis di kotak autogate belum di sambungkan. Lepas sambung, semua berfungsi dengan baik. Tq sekali lagi.

This post has been edited by ajizaimi: Aug 18 2019, 11:25 PM

kena check kabel autogate, baru door bell boleh on?

Hi. Need help on this.. Is the wiring in the last picture is correct?

The correct and professional way to wire the door bell and make it lasts years and years is using 4 wire. If you are using 2 wire means you risks electricity shock when pressing the door bell because 230 V is passing through the door bell button.
With the 4 wire method only an AC current of less than 16 V is being is being send to the door bell switch.
Even better use the telephone wire to carry the 16 volt from the door bell to the door bell button.
This is the best of the best way of installation saving you years of worry and money.