I think I decided not to put a doorbell. Mine is hardwired. Push switch is already in place. Wiring for the doorbell also in place. The problem is I cant find a wired doorbell that is not the two tone "ding dong" type.....
anyway mine is an apartment. I should not have anyone ringing my doorbell since nobody can come up anyway.
Suggest to you to use some prerecord audio electronics board. Put a switch and you can use it.
got lah but i too lazy to mess with it. in china (from aliexpress, etc) can find those wav/mp3 doorbell. then you put your own file in it, tada.... but problem is my wiring is 240V, need to think about where to put the transformer etc
I dont mind something like this - I want only the mechanism to pull the bell. I dont want the bell. I want to use my wind chimes and attach to the puller/control unit Any ideas? like some kind of servo
This post has been edited by idoblu: May 22 2017, 10:20 AM
I thought you already convert it to xiaomi automation ?
Ya not using the wires but still left hanging there kena scold by boss everyday 😭 One day I will convert to 3 pin socket. Already bought the box and socket but lazy to do.
Yang ni dalam rumah. Merah ada api, live. Hitam tak ada mungkin neutral
Tapi tadi cek wayar di suis, hitam dan merah tak ada api. Dah tekan butang loceng
I think you bought the correct doorbell Now you got to find which wire goes to where - you got 5 wires inside your house L, N, E and two wires from the push switch.
tak dapat. wayar hitam yg ada 3 saya sambung 1 di neutral dan 2 lagi di wayar suis kat doorbell. Dah tukar2 wayar2 hitam pun tak jadi
i cant see properly but at the wall there i think 3 black, 1 red, 1 green? first isolate the Live. You said Red is Live which seems weird to me because your switch got 1 red and 1 black. How did you determine it as Live?
I think this case only ozak can help you. I suggest you take a picture of the doorbell and post here as well so he can tell you which wire connect where
This post has been edited by idoblu: Jun 28 2018, 07:40 AM
is wireless doorbell reliable? solves all the wiring problems.
not as reliable as hard wired ones for condo ok lah, for landed props - better to use wired door bells. wiring problems only surface when you try to DIY. If you know how or willing to hire someone to do it then no wiring problems.
both got pros and cons
This post has been edited by idoblu: Jan 26 2019, 10:06 AM
It is very reliable now, outdoor unit no battery needed and it's dirt cheap. Even though I have wires, I choose to use the wireless one. Can plug into any room with power socket but if slightly far or have blockage might have issue. Normal double storey should be ok.
I using wireless now also...haha...so far so good. Summore can send notifications to my phone One thing good about wireless - they are cheap to replace