what board can u recomend??? still waiting for asus comando review....

ASUS Commando Motherboard Review

commando and striker extreme selling @ c'zone with the most highest price...
personally i dun think it worth to buy now, from c'zone...
because it just feed the pocket of their boss with a high profit...

from some price comparison, guest the profit gained is more than 300...

Yeah just get the Biostar TForce. That asus is just bling.

last time i went to czone checking da striker price.they selling it around RM1799.only can less RM50.then i said ok.. l8r i came back.then i ask viewnet bout da striker.. they selling RM1599.i was shocked.diff RM200 from czone.i bargain a bit and grab da striker onli RM1500

how much is the commando??/

thanks

i think u can get it from other shop with price with 1k+.

smart choice...
dun like their style...
but not going to discuss further...
ok

680i + 4x1gb Corsair dominator.
any1 have this combination...
i hear it face problems.

Hey u can still bargain with Viewnet thou. ( if u bargain futher they will browse their computer and check stock, hardware cost, how much margin to get.... and then will markup to get a nice price for u)
The reason i like buy hardward in Viewnet is.. their things is cheap and they are more willing to give discounts.. always buy my things over there lol.

This post has been edited by yehlai: Jan 15 2007, 11:37 AM

if i were u i will opt for P5W DH deluxe or the badaxe2
y not try N680i board

asus striker extreme is a good board or evga nf680i is better???

thanks

Main discussion here is about DDR2... not motherboard. Stick back to topic guys.

anyone of u guys here use this ram
Corsair TwinX XMS2 DDR2 800 512mb x 2??

Latest memtest86 : *** Enhancements in v1.70 : ***

New Features
Add new DMI polling feature
Add Support for Core/Core2 Solo/Duo/Quad CPU
Add Support for AMD K8 with DDR2 Memory
Add Support for Intel CPU with 192/384 KB L2 Cache
Add Support for FB-DIMM based memory (DMI)
Add Detection for ALI CyberAladdin-T (M1644)

Add Detection for Turion 64 X2
Add Support for ATi Radeon xPress 3200
Add Support for Intel i975X
Add Support for Intel Q965/P965
Add Support for Intel Q963/Q965
Bug Fixes
Force detection for AMD K8 with unknown chipsets

download : http://www.memtest.org/

yahoo! at last my am2 can memtest with actual timing display

How to overclock my corsair value ddr667? Im only aiming 700mhz to 750mhz.
Im using Gigabye DS4. What the starting point of my voltage add and what the max.
The multiplier setting is limited in ds4. Please please enlighten me.

increase little by little
up vdimm if not stable
use memtest or superpi32m to test
it's all basic
obviously you did not try to read overclocking guide nor the ram handbook

i did read but im i afraid burn to much the ram.
better ask advice and tips first. i did manage to oc my ram but it was unstable at 750mhz.

in my ds4 bios i can fidn where i can set the 4-4-4-12 multiplier.

This post has been edited by ^666^: Jan 18 2007, 08:12 AM

there are two characteristics of ram in response to voltage

1. responsive to voltage increament
- usually this type of ram rarely dies if you feed volt unless it far exceeds the norm. however the current ddr2 motherboards provide maximum safe voltage except for certain extreme boards. extreme boards are lame if you pair with cheapo ram. since it's just a DS4, it's just a 'enthusiast-friendly' board.

2. not responsive to voltage increament
- no matter how you feed the voltage your ram just wont go nowhere...not +0.1V... not +1.0v. these kind of ram dislike high voltage and most likely they will die if you overvolt it for too long

everything else is trial and error process.

I Looking Someone Selling The DDR2

Nanya/Samsung/Hynix

Which One Is Better For OC?

Those Memory Modules Is Take From Dell