haha..i owned it last time..bought from makiwa..not very ocable
btw..where u got ur d9 and how much?

here is my mushkin D9GMH 1GB stick rm520 ordered from OP

test rig

E6600 ES with Zalman 9500LED at 1.3875v
Gigabyte DS-3 bios F7
512mx2 Micron D9GKX OEM at +0.5v
Samsung 80gb SATA2


the Hynix i got from mjoe also can do DDR2-1068 but at +0.7v (2.5v)...

This post has been edited by baok: Oct 16 2006, 11:48 PM

D9GKX@2.17vdimm (max vdimm on Biostar)

This post has been edited by rlhc17: Nov 14 2006, 01:31 PM


Attached thumbnail(s)

would like to ask tat, D9GKX cn tahan how many volt??

probably it's safe enough for daily usage at maximum around 2.4V~2.5V.

some crazy people feed it up to 3.0V

pumped 2.4vDimm to my D9GKX for running 3-4-3-4 @1080Mhz

if i set vDimm @2.2v for 24/7 izzit ok?? will it kill my chips??

edit:
this is my Result..
only pass Super Pi 1m.
sorry i dunno how to post thumbnail screen.


This post has been edited by yehlai: Nov 14 2006, 06:59 PM

updated
D9GKX@2.35vdimm (Biostar modded)

This post has been edited by rlhc17: Nov 22 2006, 08:50 PM


Attached thumbnail(s)

Mine:

Not so high, but i think it's acceptable...

Someone please teach me how to turn off the buffering...
I don't know how to turn it off as what have been asked by the threadstarter...

I'm using "SiSoftware Sandra Lite XIb" and "CPu-Z 1.38"

Here's the screenie:

[attachmentid=162465]



----------------------------------------------------------------------------------------------

I see that "yehlai" is running his micron ram on 3-4-3-4 on 1068MHz @ 2.4V...

Can i do that to my micron too?

As my ram is running at 1000MHz, what's the best timing and voltage should i set too?

Can someone please help me?



This post has been edited by sHawTY: Dec 4 2006, 09:20 PM

Is there anyone try TEAM DDR2 here? How's the performances?

Check the first post liao...

here we don't talk about performance, we talk about overclockability

here's some of mine....

DDR2-1034 CL4-4-4-13-2T @ 2.2V


DDR2-1004 CL5-5-5-13-2T @ 1.8V

Soulfly, which one should i use? CL5 or CL4?

Kinda fenin already learning about the timings...

Teach me please...

My rams are Micron OEM DDR800 512MB
While on DDR800, the stock timings are 5-5-5-15 on stock vdimm

And right now, i've overclocked it to DDR1000 and the timings has been adjusted to 4-4-4-10 on 2.2Vdimm

Teach me bro, teach me...

@sHawTY

I think DDR1000 4-4-4-10 or 4-4-4-12 also can. But tried orthos? can pass the test ??
I forgot mine DDR1000 CL-4 is 2.2v or 2.3vDimm. Last time heard they said >2.3vDimm can kill the chips if run 24/7

This post has been edited by yehlai: Dec 5 2006, 06:21 PM

You've misunderstand what i've asked earlier...
What i'm asking is, which one should i use?

CL5 or CL4?

4-4-4-10 or 5-5-5-10?

Pening woo...

Why i try to tell u is CL-4 (but u can try 4-4-4-10 or 4-4-4-12)... becoz my OEM Micron D9 also capable to run 4-4-4-12 @2.2vDimm. Last time tampoi used 4-4-3-9 @2.2vDimm if im not wrong.

This post has been edited by yehlai: Dec 5 2006, 06:36 PM

Look, you really don't understand my question liao...
I know can run 4-4-4-10 or 4-4-4-12 on micron rams...

But my question is, which one should i use?

CL4 or CL5?

Please, can you please let others answer my question?
This is because u understand my question at all...

No offence, i'm in need of some others opinion...

I ran my Crucial 10th Anniversary @2.4V 24/7 about >4 days....still alive and kicking...

So what's you're point here?
Showing off?

i think he is saying he is running at the timings above ><