Just to point out that running higher vdimm wont kill a ram...

This post has been edited by mikelanding: Dec 6 2006, 01:28 AM

If you use common sense, obviously you would want lower latency for better performance. It's not the matter of which one you should use, but rather which one you want to use.

is this any good??

i have clocked till 1000 2.4v 5-5-5-15
but this is the best performance bandwidth that i got

Kingston Hyperx PC6400 DDR2 SLI Low latency version 2gb kit
920mhz 4-4-4-12 timing 2.3v
Buffered



This post has been edited by cstkl1: Dec 14 2006, 10:03 AM

U mean Kingston Hyperx 667?? its stock timing is lower than xms...
1000Mhz can use 4-4-4-12, can try ?

can i see ure sandra benchmark for that ram of urs??

just wondering

i actually tested it on my rams

on 920 4-4-4-12 sandra benches at 9800
on 1k 5-5-5-15 sandra benches at 9500

errrmm...

but mine on 5-5-5-18 @1000mhz can get 21k sandra benches.....

pls help me check whether my RAM has reach it's limit or not







if not the limit, then pls tell me how much i still can go for. wat's the timing of my RAM?

This post has been edited by amduser: Dec 30 2006, 05:22 PM

its obvious you can know ur current timing (pic) and the most relaxed timing supported (pic6) by the spd

how to see? which one is the most relax timing? and which one is the most panic timing?

dude.... obviously you need to learn to read the FUNDAMENTAL OF OVERCLOCKING thread instead of asking such basic/simple question here and there.

and stop posting new topic all the time.

i personally love this thread but too bad it's not as hot as C2D OC thread. ok, just want to share this link. it's useful for ppl who are on the deciding end whether which ram to buy, especially those who intend to oc. this is a great guide by kemo6600 XS.

http://www.xtremesystems.org/forums/showthread.php?t=124283

@Sanko
Nice link.. but its High Performance RAM buying guide. Atleast Rm500-700.
Xtremesystem's style

This post has been edited by yehlai: Jan 10 2007, 05:28 PM

hi guy,

i planning to buy this OCZ PC2-6400 SOE Urban Elite 2x1GB, Micron D9GMH from pcmoddingmy from his sales http://forum.lowyat.net/topic/394988 but need a good overclocker board for this rams and my E6600(ES version brought from nakata101) and can archive ddr2 1000 at CL4 and also on 1T settting if possible but after reading some review that are 2 board have a decent price and quite good overclock not like overkill price are Asus P5B Deluxe and AW9D MAX or is there a more better board than this that dont have price over RM1K so guy pls help me out here ...

thanks

Cheap some more want that high-end mobo for OC memory?? since u mention that price is overkill yr budget, get that Gigabyte DS3 some more cheaper that Asus P5B Deluxe and AW9D MAX & some more can OC like ka "Hell" u want..... why not??

Hey guys, planning to get some cool RAMs here, been looking through Corsair Dominator series, between the TWIN2X2048-6400C3DF & TWIN2X2048-8888C4DF...which will give me the best performance in OC? or can my mobo get to handle these RAMs at high voltage??

Besides that, any other recommandation RAMs for my mobo??

hehehe hey cstkl1 thanks for the ram ya...now using ddr2 kingston hyper x 6400 2gb kit.......still playing around with it now runnin with 420mhz 4:4:4:12 ...1:1 divider cpu @ 3.3 multiplyer down to 8 goin to push a bit more since temperature oso full load now playing 58-59c...

heard that the corsair cm2x 5402 v7.2 is psc...
some say it can hit ddr800...
but who knows...

I told him earlier to read fundamentals of overclocking but the mods delete

since u effort such exp rams y not buy a good board for oc?