Welcome Guest ( Log In | Register )

69 Pages « < 21 22 23 24 25 > » Bottom

Outline · [ Standard ] · Linear+

Unifi TMnet Streamyx/Unifi & IPv6, Now live!

views
     
OKLY
post Nov 23 2013, 10:27 PM

The Penguin Vader
Group Icon
Staff
12,089 posts

Joined: Dec 2004
From: Malaysia


QUOTE(mrlive005 @ Nov 23 2013, 10:12 PM)
i guess it's enable lol tongue.gif i can open both of them.

Can anyone please explain me ? what is the differences Ipv4 and Ipv6  ?
is it will make my internet more speed ? would i have lower ping when i play game ?
Sorry i dont have time to read all those 22 page ;/ i'm just a basic computer user .
Thx in advance
user posted image
*
Yes, if you're connected to this forum via IPv6 then you will see the IPv6 word next to your post number. smile.gif
SUSmrlive005
post Nov 23 2013, 10:34 PM

Getting Started
**
Junior Member
114 posts

Joined: Nov 2013
QUOTE(OKLY @ Nov 23 2013, 10:27 PM)
Yes, if you're connected to this forum via IPv6 then you will see the IPv6 word next to your post number. smile.gif
*
Oh ye, i see it tongue.gif
can you explain what is the differences btw ipv4 and ipv6 ? would it make my ping lower when i play game and speed up my connection?

This post has been edited by mrlive005: Nov 23 2013, 10:36 PM
OKLY
post Nov 23 2013, 10:45 PM

The Penguin Vader
Group Icon
Staff
12,089 posts

Joined: Dec 2004
From: Malaysia


QUOTE(wKkaY @ Nov 19 2013, 11:27 PM)
If your iPad isn't connecting to our forum over IPv6, then it won't show that you've posted from an IPv6 address.
*
QUOTE(yeam @ Nov 20 2013, 11:30 AM)
Yup I think it's due to Happy Eyeballs.

Attached Image

Connecting to this forum using IPv6 will result in slightly higher ping compared to IPv4 and I think that's why my iPad/iPhone resorted back to IPv4. hmm.gif
OKLY
post Nov 23 2013, 10:51 PM

The Penguin Vader
Group Icon
Staff
12,089 posts

Joined: Dec 2004
From: Malaysia


QUOTE(mrlive005 @ Nov 23 2013, 10:34 PM)
Oh ye, i see it tongue.gif
can you explain what is the differences btw ipv4 and ipv6 ? would it make my ping lower when i play game and speed up my connection?
*
In a not so technical way of explaining, most of the time they will perform about the same. The difference won't make miracles happen (e.g. from lag to no lag).
Anonymous34
post Nov 24 2013, 04:38 PM

Look at all my stars!!
*******
Senior Member
3,176 posts

Joined: May 2013
From: Petaling Jaya


QUOTE(OKLY @ Nov 23 2013, 10:51 PM)
In a not so technical way of explaining, most of the time they will perform about the same. The difference won't make miracles happen (e.g. from lag to no lag).
*
I thought they said ipv4 is very congested so that's why they invented iPv6 for more space. Btw bro I have just tukar my dir 615 to Asus RT-N10+ C1 with openwrt. Everything works except iptv. Any idea how to set up ipv6?
I'm really noob in networking things.
OKLY
post Nov 24 2013, 08:48 PM

The Penguin Vader
Group Icon
Staff
12,089 posts

Joined: Dec 2004
From: Malaysia


QUOTE(amirsubhi @ Oct 7 2013, 06:22 PM)
Tested my Asus RT-N12 C1 Ver 3.0.0.4.374_813 with Unifi

and IPv6 connected  rclxm9.gif

» Click to show Spoiler - click again to hide... «

*
Do you mind sharing your WAN and IPv6 settings? My IPv6 is fine but I can't seem to get 10/10 from the IPv6 test as the site is reporting that I may have MTU problems. hmm.gif
Anonymous34
post Nov 24 2013, 08:57 PM

Look at all my stars!!
*******
Senior Member
3,176 posts

Joined: May 2013
From: Petaling Jaya


QUOTE(OKLY @ Nov 24 2013, 08:48 PM)
Do you mind sharing your WAN and IPv6 settings? My IPv6 is fine but I can't seem to get 10/10 from the IPv6 test as the site is reporting that I may have MTU problems. hmm.gif
*
I also want to know how to configure ipv6 on open-wrt firmware nod.gif
Please someone teach us! After configure also cannot work.
OKLY
post Nov 24 2013, 09:08 PM

The Penguin Vader
Group Icon
Staff
12,089 posts

Joined: Dec 2004
From: Malaysia


QUOTE(Anonymous34 @ Nov 24 2013, 08:57 PM)
I also want to know how to configure ipv6 on open-wrt firmware nod.gif
Please someone teach us! After configure also cannot work.
*
This one need OpenWRT guru, I'm on Asus' stock firmware only.
andrew9292
post Nov 24 2013, 09:17 PM

-/Livin' On A Prayer/-
*****
Senior Member
955 posts

Joined: Sep 2008
From: Petaling Jaya


QUOTE(Anonymous34 @ Nov 24 2013, 04:38 PM)
I thought they said ipv4 is very congested so that's why they invented iPv6 for more space. Btw bro I have just tukar my dir 615 to Asus RT-N10+ C1 with openwrt. Everything works except iptv. Any idea how to set up ipv6?
I'm really noob in networking things.
*
They just ran out of addresses. Just like number plates.

WYZ 1234 = v4
W 1234 A = v6

Route still the same or assigned by isp peering.
It means that even if u hav ipv6 'number plate'. If your isp assigns a 'kampung road' to your address, it wont be any faster. If u get a fast route, faster. Simillar route, same speed.

Old number plate or new number plate, both on the same existing roads.
Ipv4 or ipv6. Same theory.
At the end of the day, just a number plate to identify yourself.lol.

If there's any speed difference, it will be due to specific peering to that ip subnet by isp, which happens to be a faster or slower route.

Correct me if im wrong.
----

For ipv6 on Openwrt i only got it to work on latest beta 'barrier breaker'. It has native ipv6 support
Settings have to be done via ssh as the build is too big to install luci. Follow their wiki, pretty straightforward.
http://wiki.openwrt.org/doc/uci/network6#b...eaker.and.later

This post has been edited by andrew9292: Nov 24 2013, 09:28 PM
OKLY
post Nov 24 2013, 09:18 PM

The Penguin Vader
Group Icon
Staff
12,089 posts

Joined: Dec 2004
From: Malaysia


QUOTE(andrew9292 @ Nov 24 2013, 09:17 PM)
They just ran out of addresses. Just like number plates.

WYZ 1234 = v4
W 1234 A = v6

Route still the same or assigned by isp peering.
It means that even if u hav ipv6 'number plate'. If your isp assigns a 'kampung road' to your address, it wont be any faster. If u get a fast route, faster. Simillar route, same speed.

Old number plate or new number plate, both on the same road.
Ipv4 or ipv6. Same theory. At the end of the day, just a number plate.lol.

Correct me if im wrong
*
Yes, one should not expect too much of performance. It won't make miracles happen.
prasys
post Nov 24 2013, 09:37 PM

Heros Never Die
Group Icon
VIP
12,925 posts

Joined: Mar 2005
From: Kuala Lumpur
QUOTE(mrlive005 @ Nov 23 2013, 10:34 PM)
Oh ye, i see it tongue.gif
can you explain what is the differences btw ipv4 and ipv6 ? would it make my ping lower when i play game and speed up my connection?
*
In my case , World of Warcraft ping times have been reduced by 30-40ms.

There are some cases whereby the ping time increased

Again , your game server ,game client must support IPV6. So far World of Warcraft supports IPV6 , not sure if other MMO games support IPV6 or any other games


On IPV6 , there are some routes faster compared to IPV4. Again there are cases where it is worst

Performance may vary


patienceGNR
post Nov 24 2013, 10:00 PM

♥ Ride All Day ♥
*******
Senior Member
2,058 posts

Joined: Mar 2011
From: Today: 9:03 AM



Anybody having wonky internet now? My Modem keeps restarting by itself. Sigh.

OKLY
post Nov 24 2013, 10:03 PM

The Penguin Vader
Group Icon
Staff
12,089 posts

Joined: Dec 2004
From: Malaysia


QUOTE(patienceGNR @ Nov 24 2013, 10:00 PM)
Anybody having wonky internet now? My Modem keeps restarting by itself. Sigh.
*
Nope mine is fine, if your modem is restarting by itself then that should be a hardware issue already.
patienceGNR
post Nov 24 2013, 10:05 PM

♥ Ride All Day ♥
*******
Senior Member
2,058 posts

Joined: Mar 2011
From: Today: 9:03 AM



QUOTE(OKLY @ Nov 24 2013, 10:03 PM)
Nope mine is fine, if your modem is restarting by itself then that should be a hardware issue already.
*
it was working fine earlier today. hmm.gif crap......... and it keeps restarting every 2 minutes now. only Power will be on, then slowly all others reconnect.

I think I have made 5 calls to UniFi center, with 2 calls that went through but disconnected halfway - and then no one calls back. Terus create a case and close it.

How I know it is closed - I received SMS saying it is closed. Seriously? In Starhub where I work, if the agents close the case without giving call back, will kena one.
Moogle Stiltzkin
post Nov 24 2013, 10:47 PM

Look at all my stars!!
*******
Senior Member
4,454 posts

Joined: Jan 2003
bruce.gif

This post has been edited by Moogle Stiltzkin: Jul 15 2017, 10:47 AM
patienceGNR
post Nov 24 2013, 11:17 PM

♥ Ride All Day ♥
*******
Senior Member
2,058 posts

Joined: Mar 2011
From: Today: 9:03 AM



QUOTE(Moogle Stiltzkin @ Nov 24 2013, 10:47 PM)
welcome to monopoly or as we say, malaysia boleh  laugh.gif
*
Just ended a 21min long call with them, using my hp. gonna cost me a bomb. will definitely seek compensation dy. 1-3mths waiver whistling.gif

my typical learned-from-Singaporean style whistling.gif service down, terus marah. hahahaha. well, they can't pinpoint what the issue is, no wrong to that but they require 24hrs for tech to reply to the case first, then only will send tech to my house here to check on the hub. that'll take another like 24 hours? i on the call said, "The very least for them to come to my house is by Tuesday. So I gotta bear with the internet that disconnects every 2-5 minutes for 2 days? I will definitely seek for compensation in this case. I would want to hear from TM regarding my case tomorrow. No calls tomorrow from TM, I will call in and look for your manager."

diam je the agent. i know not her fault but she cannot give resolution, like, "Ok sir, I will send out an e-mail to the technical team, the very least I could do to assist to resolve your issue as you require the internet."

at least saying that can psychologically tipu orang. just my experience working in call centers lah tongue.gif but we do send out emails to speed up process.

well, just sharing my experience to people who, in future, want to dispute/complaint/get waiver.
OKLY
post Nov 24 2013, 11:28 PM

The Penguin Vader
Group Icon
Staff
12,089 posts

Joined: Dec 2004
From: Malaysia


QUOTE(patienceGNR @ Nov 24 2013, 11:17 PM)
Just ended a 21min long call with them, using my hp. gonna cost me a bomb. will definitely seek compensation dy. 1-3mths waiver whistling.gif

my typical learned-from-Singaporean style whistling.gif service down, terus marah. hahahaha. well, they can't pinpoint what the issue is, no wrong to that but they require 24hrs for tech to reply to the case first, then only will send tech to my house here to check on the hub. that'll take another like 24 hours? i on the call said, "The very least for them to come to my house is by Tuesday. So I gotta bear with the internet that disconnects every 2-5 minutes for 2 days? I will definitely seek for compensation in this case. I would want to hear from TM regarding my case tomorrow. No calls tomorrow from TM, I will call in and look for your manager."

diam je the agent. i know not her fault but she cannot give resolution, like, "Ok sir, I will send out an e-mail to the technical team, the very least I could do to assist to resolve your issue as you require the internet."

at least saying that can psychologically tipu orang. just my experience working in call centers lah tongue.gif but we do send out emails to speed up process.

well, just sharing my experience to people who, in future, want to dispute/complaint/get waiver.
*
One annoying thing is they do not have a toll free or at least free for their own customers to call. Time is already ticking the moment we have to press this and that and wait for the call to be connected to a customer service personnel. sweat.gif
alexwsk
post Nov 24 2013, 11:30 PM

Look at all my stars!!
*******
Senior Member
4,092 posts

Joined: Jan 2003
From: USJ


QUOTE(andrew9292 @ Nov 24 2013, 09:17 PM)
They just ran out of addresses. Just like number plates.
For ipv6 on Openwrt i only got it to work on latest beta 'barrier breaker'. It has native ipv6 support
Settings have to be done via ssh as the build is too big to install luci. Follow their wiki, pretty straightforward.
http://wiki.openwrt.org/doc/uci/network6#b...eaker.and.later
*
for barrier breaker, need to Enable IPv6 negotiation on the PPP link?
And which protocol to select for WAN6?
thx

This post has been edited by alexwsk: Nov 24 2013, 11:34 PM
asellus
post Nov 24 2013, 11:41 PM

#gompusas
Group Icon
Elite
4,541 posts

Joined: Jan 2003
From: BSRPPG51 Access Concentrator


QUOTE(alexwsk @ Nov 24 2013, 11:30 PM)
for barrier breaker, need to Enable IPv6 negotiation on the PPP link?
And which protocol to select for WAN6?
thx
*
You need to create a DHCPv6-PD client on your @wan interface too.
patienceGNR
post Nov 24 2013, 11:46 PM

♥ Ride All Day ♥
*******
Senior Member
2,058 posts

Joined: Mar 2011
From: Today: 9:03 AM



QUOTE(OKLY @ Nov 24 2013, 11:28 PM)
One annoying thing is they do not have a toll free or at least free for their own customers to call. Time is already ticking the moment we have to press this and that and wait for the call to be connected to a customer service personnel.  sweat.gif
*
It is free if you're calling from their own number, i.e your houseline but if your Unifi is down, how to call la? laugh.gif

Really funny one these people laugh.gif

69 Pages « < 21 22 23 24 25 > » Top
 

Change to:
| Lo-Fi Version
0.0179sec    0.81    6 queries    GZIP Disabled
Time is now: 1st December 2025 - 12:19 PM