Unifi TMnet Streamyx/Unifi & IPv6, Now live!
|
|
 Nov 20 2013, 11:11 PM
|
 
Junior Member
18 posts Joined: Nov 2008 From: Malaysia  
|
QUOTE(OKLY @ Nov 20 2013, 09:49 AM) Guys, anyone tried TP-Link TL-WDR4300? Does it fully support IPv6? Thinking of getting this to replace my previous Buffalo WHR-HP-G300N as I'm now on the stock D-Link DIR-615. TP-Link's stock firmware may not have good support for ipv6, but WDR4300 is well supported by OpenWRT and it's Linux! http://wiki.openwrt.org/toh/tp-link/tl-wdr4300 http://ofmodemsandmen.com/supported.html |
|
|
|
|
|
Nov 20 2013, 11:51 PM
|
 
Staff
12,089 posts Joined: Dec 2004 From: Malaysia
|
QUOTE(iOnicStorm @ Nov 20 2013, 11:11 PM) TP-Link's stock firmware may not have good support for ipv6, but WDR4300 is well supported by OpenWRT and it's Linux! Will look into that but currently prefer something that will work out of the box.http://wiki.openwrt.org/toh/tp-link/tl-wdr4300 http://ofmodemsandmen.com/supported.html |
|
|
Nov 21 2013, 12:08 PM
Show posts by this member only | IPv6 | Post
#423
|
Senior Member
4,454 posts Joined: Jan 2003
|
 This post has been edited by Moogle Stiltzkin: Jul 15 2017, 10:45 AM |
|
|
Nov 21 2013, 12:55 PM
|
Junior Member
8 posts Joined: Jun 2012
|
IPv6 available for Unifi area Shah Alam? I using Unifi BIZ20.
Router D-Link DL-604 Firmware 7.15. IPv6 Connection status : Disconnect. IPv6 Connection Type: PPPoE Any help? |
|
|
Nov 21 2013, 03:15 PM
|
|
Senior Member
4,454 posts Joined: Jan 2003
|
This post has been edited by Moogle Stiltzkin: Jul 15 2017, 10:45 AM |
|
|
Nov 21 2013, 05:39 PM
|
Junior Member
164 posts Joined: Feb 2008
|
guys,
i cant tick dual lan checkbox box but i can tick ipv6 checkbox on L7 router. location is in sungai buloh. is there any chance that sungai buloh area is not ipv6 supported yet ? |
|
|
|
|
|
Nov 21 2013, 07:56 PM
Show posts by this member only | IPv6 | Post
#427
|
|
Senior Member
4,454 posts Joined: Jan 2003
|
This post has been edited by Moogle Stiltzkin: Jul 15 2017, 10:46 AM |
|
|
Nov 22 2013, 12:25 AM
|
|
Staff
12,089 posts Joined: Dec 2004 From: Malaysia
|
QUOTE(Moogle Stiltzkin @ Nov 21 2013, 03:15 PM) same issue here Try lowering the MTU value to 1452. how to fix ? |
|
|
Nov 22 2013, 06:23 AM
Show posts by this member only | IPv6 | Post
#429
|
|
Senior Member
4,454 posts Joined: Jan 2003
|
This post has been edited by Moogle Stiltzkin: Jul 15 2017, 10:46 AM |
|
|
Nov 22 2013, 11:46 AM
|
 
VIP
12,925 posts Joined: Mar 2005 From: Kuala Lumpur
|
QUOTE(Moogle Stiltzkin @ Nov 21 2013, 12:08 PM) i confirm got ipv6 1. I switched to Google's but i'm not sure how to set up properly. 1. do i switch to opendns ipv6 ? or continue using tmnuts default dns ? 2. how to set chrome and firefox to prefer ipv6 when available ? Currently they prefer ipv4 :/ 3. any other settings to do ? 4. does diablo 3 have ipv6 ? how to ping test to their server ? 2. It will automatically prefer IPV6 whenever posisble. Need to clear DNS cache and try lowyat.net , it will use ipv6 3. No 4. Yes , for World of Warcraft. Not sure about Diablo 3 . I assume it will work for it. http://ipv6.blizzard.com/ |
|
|
Nov 22 2013, 01:15 PM
|
Senior Member
1,725 posts Joined: Jan 2003
|
speedtest.net support ipv6? ipv6 ping should be higher than ipv4 most if not all of the times.
QUOTE(Moogle Stiltzkin @ Nov 21 2013, 07:56 PM)  tested using Unifi IPV6  Now for the real test for internetional connection.       As a gamer, from my observation, the 200-300ms is pretty okay for gaming overseas. This is a vast improvement from long ago during the adsl times when ping latency was somewhere around 600-800ms and even more on bad days. Local gaming say counter strike with 4-15 ms .....is just insanely good..... almost as fast latency as playing on a lan  Anyway, just some observations. I noticed my laptop shows in the ipv6 test as having it, but my desktop didn't. To fix that, i went to my network adapter and disabled it, and turn it back on after 10 seconds. As an extra measure i also went to cmd and did a ipconfig /flushdns I then refresh the browser to perform the test, and it accurately showed that i'm running on ipv6. Oh and i notice that the test indicated that the browser will prefer ipv4 over ipv6 when both are available. I'm not quite sure how to prioritize ipv6 also i'm having trouble accessing facebook. not quite sure how to fix that. |
|
|
Nov 22 2013, 01:24 PM
|
|
Senior Member
4,454 posts Joined: Jan 2003
|
This post has been edited by Moogle Stiltzkin: Jul 15 2017, 10:46 AM |
|
|
Nov 22 2013, 07:41 PM
Show posts by this member only | IPv6 | Post
#433
|
|
Senior Member
4,454 posts Joined: Jan 2003
|
This post has been edited by Moogle Stiltzkin: Jul 15 2017, 10:46 AM |
|
|
|
|
|
Nov 23 2013, 12:02 AM
Show posts by this member only | IPv6 | Post
#434
|
|
Senior Member
4,454 posts Joined: Jan 2003
|
This post has been edited by Moogle Stiltzkin: Jul 15 2017, 10:46 AM |
|
|
Nov 23 2013, 03:28 PM
|
Senior Member
3,123 posts Joined: Sep 2008 From: OUG - Muhibbah LRT
|
Can't get IPv6, Unifi VIP5 Ampang
L7 modem PDF doc from TMnet about enabling IPv6 For Dynamic IP I can't tick ''Dual LAN''  , but can tick ''Enable IPv6''For Fixed IP I can't access the internet but can tick both ''Dual LAN'' and ''Enable IPv6'' Is that for Unifi VIP5 user can't use Fixed IP? Must use Dynamic IP ipv6.pcap.zip what is this? This post has been edited by wkkm007: Nov 23 2013, 03:38 PM |
|
|
Nov 23 2013, 05:21 PM
|
Junior Member
114 posts Joined: Nov 2013
|
Did my IPV6 enable yet ?
 What i should configure here ? it say i still on ipv4 and ipv6 no internet access as u can see in the image, appreciate any help .  This post has been edited by mrlive005: Nov 23 2013, 05:23 PM |
|
|
Nov 23 2013, 05:31 PM
|
Senior Member
1,182 posts Joined: Jan 2003
|
QUOTE(iOnicStorm @ Nov 20 2013, 11:11 PM) TP-Link's stock firmware may not have good support for ipv6, but WDR4300 is well supported by OpenWRT and it's Linux! http://wiki.openwrt.org/toh/tp-link/tl-wdr4300 http://ofmodemsandmen.com/supported.html QUOTE(OKLY @ Nov 20 2013, 11:51 PM) Will look into that but currently prefer something that will work out of the box. Unfortunately, the firmware that supports TM UniFi at the moment does not have IPv6 support, although the general firmware does. Just hope TP-Link can release an updated firmware soon that supports IPv6 on TM UniFi. |
|
|
Nov 23 2013, 06:27 PM
|
|
Junior Member
114 posts Joined: Nov 2013
|
Now it's enable, but i still can't test http://ipv6-test.com/ , something wrong.
Image  This is my result when i do test  This post has been edited by mrlive005: Nov 23 2013, 06:27 PM |
|
|
Nov 23 2013, 08:23 PM
Show posts by this member only | IPv6 | Post
#439
|
 
Elite
4,541 posts Joined: Jan 2003 From: BSRPPG51 Access Concentrator
|
QUOTE(mrlive005 @ Nov 23 2013, 06:27 PM) Now it's enable, but i still can't test http://ipv6-test.com/ , something wrong. Try this test page first, then try opening this IPv6-only page if it loads or not.Image » Click to show Spoiler - click again to hide... « This is my result when i do test » Click to show Spoiler - click again to hide... « |
|
|
Nov 23 2013, 10:12 PM
Show posts by this member only | IPv6 | Post
#440
|
|
Junior Member
114 posts Joined: Nov 2013
|
QUOTE(asellus @ Nov 23 2013, 08:23 PM) i guess it's enable lol  i can open both of them.Can anyone please explain me ? what is the differences Ipv4 and Ipv6 ? is it will make my internet more speed ? would i have lower ping when i play game ? Sorry i dont have time to read all those 22 page ;/ i'm just a basic computer user . Thx in advance  |
| Change to: |  0.0260sec
 0.42
 6 queries
 GZIP Disabled
Time is now: 1st December 2025 - 08:56 AM |
Quote