Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed

Outline · [ Standard ] · Linear+

Unifi TMnet Streamyx/Unifi & IPv6, Now live!

views
     
alexwsk
post Nov 24 2013, 11:30 PM

Look at all my stars!!
*******
Senior Member
4,092 posts

Joined: Jan 2003
From: USJ
QUOTE(andrew9292 @ Nov 24 2013, 09:17 PM)
They just ran out of addresses. Just like number plates.
For ipv6 on Openwrt i only got it to work on latest beta 'barrier breaker'. It has native ipv6 support
Settings have to be done via ssh as the build is too big to install luci. Follow their wiki, pretty straightforward.
http://wiki.openwrt.org/doc/uci/network6#b...eaker.and.later
*
for barrier breaker, need to Enable IPv6 negotiation on the PPP link?
And which protocol to select for WAN6?
thx

This post has been edited by alexwsk: Nov 24 2013, 11:34 PM
alexwsk
post Nov 25 2013, 12:01 AM

Look at all my stars!!
*******
Senior Member
4,092 posts

Joined: Jan 2003
From: USJ
QUOTE(asellus @ Nov 24 2013, 11:41 PM)
You need to create a DHCPv6-PD client on your @wan interface too.
*
any details guide? currently i have luci but have not install luci-proto-ipv6
can I do it manually by modifying /etc/config/network only or need to modify more files?
alexwsk
post Nov 25 2013, 11:29 AM

Look at all my stars!!
*******
Senior Member
4,092 posts

Joined: Jan 2003
From: USJ
QUOTE(asellus @ Nov 25 2013, 05:50 AM)
With Barrier Breaker, only need to modify '/etc/config/network' file, if you don't install luci-proto-ipv6. Still need odhcp6c though.
*
odhcp6c has been installed by default
can you post or pm me your /etc/config/network without those sensitive info, thx notworthy.gif
alexwsk
post Nov 25 2013, 03:28 PM

Look at all my stars!!
*******
Senior Member
4,092 posts

Joined: Jan 2003
From: USJ
QUOTE(asellus @ Nov 25 2013, 12:46 PM)
I don't have the router anymore, but just doing what http://wiki.openwrt.org/doc/uci/network6 told you and you should be OK.

CODE

config interface wan
       option ipv6 1 # only required for PPP-based protocols
       ...

config interface wan6
       option ifname   @wan
       option proto    dhcpv6

config interface lan
       option proto    static
       option ip6assign 60
       ...

*
ok, thx
will try it out, currently one location no ipv6 yet (USJ), will try at another location (PJ)
alexwsk
post Nov 25 2013, 11:50 PM

Look at all my stars!!
*******
Senior Member
4,092 posts

Joined: Jan 2003
From: USJ
QUOTE(asellus @ Nov 25 2013, 04:29 PM)
BTW, the 'option ip6assign' for Streamyx should be 64.
*
mine are unifi/unifibiz
no luck at both areas
alexwsk
post Nov 28 2013, 11:46 AM

Look at all my stars!!
*******
Senior Member
4,092 posts

Joined: Jan 2003
From: USJ
seems like PJ seksyen 17 got ipv6
just testing out with this post

/etc/config/network for openwrt barrier breaker as below:

config interface 'wan'
option ifname 'eth0.500'
option proto 'pppoe'
option username 'xxxxxx@unifi'
option password 'xxxxxx'
option peerdns '0'
option dns '8.8.8.8 208.67.222.222'
option ipv6 '1'

config interface 'wan6'
option ifname '@wan'
option proto 'dhcpv6'
option reqaddress 'try'
option reqprefix 'auto'
option peerdns '0'
option dns '2001:4860:4860::8888 2620:0:ccc::2'

This post has been edited by alexwsk: Nov 28 2013, 11:55 AM
alexwsk
post Feb 10 2014, 09:09 PM

Look at all my stars!!
*******
Senior Member
4,092 posts

Joined: Jan 2003
From: USJ
QUOTE(klseet @ Feb 10 2014, 07:39 PM)
Does anyone here manage to get OpenWRT trunk works?
*
klseet Yes, I'm using stock Dlink DIR-615. After flashing to trunk, I installed luci.
My network file (related sections) looks like the following:

config interface 'lan'
option ifname 'eth0.1'
option type 'bridge'
option proto 'static'
option ipaddr '192.168.0.1'
option netmask '255.255.255.0'
option ip6assign '64'
option macaddr '02:0c:43:XX:XX:XX'

config interface 'wan'
option _orig_ifname 'eth0.2'
option _orig_bridge 'false'
option ifname 'eth0.500'
option proto 'pppoe'
option username 'XXX@unifi'
option password '12345678'
option peerdns '0'
option dns '8.8.8.8 208.67.222.222'
option ipv6 '1'

config interface 'wan6'
option ifname '@wan'
option proto 'dhcpv6'
option reqaddress 'try'
option reqprefix 'auto'
option peerdns '0'
option dns '2001:4860:4860::8888 2620:0:ccc::2'

This post has been edited by alexwsk: Feb 10 2014, 09:10 PM
alexwsk
post Oct 15 2014, 01:57 PM

Look at all my stars!!
*******
Senior Member
4,092 posts

Joined: Jan 2003
From: USJ
QUOTE(jolmy @ Oct 14 2014, 10:46 PM)
I am using two units of Asus RT-N12HP.

One is used for UniFi VIP10 but unfortunately, IPv6 does NOT work.
Another is used for Streamyx 4Mbps at my kampung, and IPv6 works.
Both routers have IPv6 settings set the same way.

Just want to confirm if TM has actually roll out IPv6 to all customers, or still in stages?
*
still in progress
not all areas has it
alexwsk
post Feb 8 2015, 11:22 PM

Look at all my stars!!
*******
Senior Member
4,092 posts

Joined: Jan 2003
From: USJ
QUOTE(darrenliew96 @ Feb 8 2015, 10:40 PM)
Still can't delegate IPv6 Address to LAN interface with Openwrt

user posted image

Any idea?

They said is ISP problem but I don't believe it is because I can get IPv6 Address on all devices with dlink TM stock adsl router.
*
did u follow this?
https://forum.lowyat.net/topic/2978208/+880#
alexwsk
post Apr 6 2015, 09:06 PM

Look at all my stars!!
*******
Senior Member
4,092 posts

Joined: Jan 2003
From: USJ
QUOTE(piju @ Apr 6 2015, 04:16 PM)
any openwrt users here ?
*
i'm using openwrt Barrier Breaker 14.07
alexwsk
post Apr 7 2015, 11:23 PM

Look at all my stars!!
*******
Senior Member
4,092 posts

Joined: Jan 2003
From: USJ
QUOTE(piju @ Apr 7 2015, 05:32 PM)
me too alexwsk

but it seem br-lan didnt get any IPV6 addresses. only wan.
*
refer post 882
https://forum.lowyat.net/topic/2978208/+880#

piju
alexwsk
post Sep 15 2015, 09:44 AM

Look at all my stars!!
*******
Senior Member
4,092 posts

Joined: Jan 2003
From: USJ
QUOTE(cheong987 @ Sep 14 2015, 03:27 PM)
Anyone can share the configuration to enable IPv6 at OpenWrt Chaos Calmer 15.05?
No matter how I try I still manage to get IPv4 address only.
*
/etc/config/network

config interface 'wan'
option _orig_ifname 'eth0.2'
option ifname 'eth0.500'
option force_link '1'
option macaddr 'xx:xx:xx:xx:xx:xx'
option proto 'pppoe'
option username 'xxx@unifi'
option password '123456'
option mtu '1452'
option peerdns '0'
option ipv6 '1'
option dns '8.8.8.8 208.67.222.222'

config interface 'wan6'
option ifname '@wan'
option proto 'dhcpv6'
option peerdns '0'
option dns '2001:4860:4860::8888 2001:4860:4860::8844'
option reqaddress 'none'
option reqprefix 'auto'
alexwsk
post Feb 10 2017, 03:57 PM

Look at all my stars!!
*******
Senior Member
4,092 posts

Joined: Jan 2003
From: USJ
QUOTE(kupang @ Feb 10 2017, 03:28 PM)
might have to amend the topic ..
because it says TMnet Streamyx/Unifi  "AND"  IPv6
*
wKkaY, i suggest changing it to IPV6 for TM Streamyx/Unifi
« Next Oldest · Networks and Broadband · Next Newest »
 

Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.0414sec    0.78    7 queries    GZIP Disabled
Time is now: 1st December 2025 - 08:41 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.