Bro, if the clip is already broken, there's nothing you can do. you'll have to change the whole thing.

Happened to me before, but I didn't bother to repair, as it's not a big deal for me. But as luck would have it, my car got into a sandwich accident, and the insurance company from car hitting me replaced the bumper as part of the repair. but i don't have car for 5 days for the insurance claim process.

Any taiko here know which Car Paint Shop in PENANG is reputable enough to do Kia Painting??? My car kena this and i believe the base coat d come out~~so worry about rusting issue.
Thats y i think will take to repaint the side door. Hope to get some reputable 1 so that i can get back the nearest car paint colour.


Attached thumbnail(s)

tarik the loose part bumper out with care, stuff some cotton inside and apply super glue liquid on the cotton.. then
push back in and hold for about 30 seconds (under the hot sun)
if you're not confident to do it yourself, outside any ketuk shop bawah pokok rambutan sure knows how to do it..

This post has been edited by Ah_Bear: May 5 2013, 01:32 AM

I have 3 chip spots, eventough not as big as yours but what I do is I use ezy paint. Got it from Jusco. Cost around 50. The instruction says that if u have uneven chips like yours, use wet sand paper with grade 400-500, iron out those uneven-ness. Then use the ezy paint to repair spot by spot.

The paint repair has 3 solutions. Washer, paint and clear coat. Mine is titanium silver, and it worked good for me. Even works on my bumper. I feel that it is a good investment.

Thanks for your info bro. In fact this is not that big as u think, i just close up my shot only. It was like 5cents coin size on the side door.
So as you say use wet sand paper to iron out those uneven-ness, mean just to sand the around surrounding to make those oxidize paint get out from the body izit

If the clip is broken, some SC will use cable tie to fix it back to original position. It will look as good as new. Just try out at the SC first. Cheers!

Hi what are the recommended glue stain remover on glass surface

what type of glue stain?

I will propose if you quickly do it. Don't drag till it rust. When I first found out that my door has chipped paint, already can see metal, i rushed to Jusco to get the paint at 10pm. As mine is clean ship with no uneven-ness, I just apply the solution step by step. No sand paper.

But my friend's kena damn hard stone or whatever. The paint like folded like wrinkles (1 or 2 lines). So the instruction says use fine grade wet sand paper to polish off the uneven-ness, apply grease washer, the paint, then the clear coat. Some one here opt for the correction pen which can be obtained from ebay or kiaceratoblogspot. Cheaper but I am not sure if that pen has clear coat in it. Have to ask pther forumers. But ezy paint is working fine for me.

Hope it helps.

I have found a shop selling new Lenso rims, 17".

The whole range of ori lenso regardless of the design is rm1450. trade in ori rim only is 600. I believe that the price is OK. Any one has done anything that can beat this price?

Hi guys,

My driver side side-mirror is not folding anymore.
Has this happened to anyone before?

Guys.. Question..

Anybody know where I can mod my rear tail lamps for Forte?

Good workmanship in relation to price (reasonableness).

I am looking for Superlux but a lot of places told me that these are out of stock =s (especially the Superlux Black bezel).

I have also asked Yip Auto / Korean Auto Accessories (Nick) if they have other type of rear lamps.

But their reply is crazy slow.

I wanna go mod my Forte this sat and give it an "identity" when I get my car sometime this week from Mr. Loh.

Any recommendations from fellow drivers here? (=

(any other auto accessories shop recommended in KL/Sunway/PJ area)

Any other type of rear tail lamp mods besides Superlux?

This post has been edited by KiyoshiJoz: May 6 2013, 03:52 PM

Stickers , on windscreen

RM 10 at Ace hardware

or

Tupertin (less than RM8 at ah hock hardware shop)

or

Autosol

or

Car body polish

use cooking oil put on cloth and rub it. ( use cloth that u dun wan , use those cloth can abbsorb oil geh )

Thanks. just now went to Jusco but not manage to find it. The sand paper is it abbrasive waterproof type??? get the code 400-500 like that 1 is it???

tq to both of u

Did your car side mirror crashed by anything before ?

Maybe not all Jusco has it, but all the 4 Juscos I went have it. Search for more Jusco. Try googling EZY PAINT. I believe they do delivery. 400-500 is the grade or how fine is the sand. Get a finer one. Abbrasive water proof or not I dont know. We just went and grab whatever hardware store nearby has,wet it, and he starts scrubbing off the paint.

i think itz cheap but check any other hidden cost
i mean is the price included center cone, lock nut (safety?), even metal tyre valve etc
i kena before, hv to pay for all mentioned while most of my fren got them free while buying rims